December 31, 2016, 01:59 PM | #1 |
Senior Member
Join Date: November 12, 2008
Location: Fort Worth, TEXAS
Posts: 909
|
45-70 whitetail load
I have an HR Buffalo Classic rifle and I want to develop a whitetail load for it.
There are so many options for bullets. 300-500gr, jacketed, cast, etc. Where is a good starting place? |
December 31, 2016, 02:14 PM | #2 |
Senior Member
Join Date: June 16, 2008
Location: Transplanted to Ridgeland,SC
Posts: 606
|
More info please
What range will you be shooting,cast or jacketed,recoil sensitive or not,and barrel length.I reload for a Marlin cowboy 26 in ranges are mostly less than 100 yards.
|
December 31, 2016, 02:15 PM | #3 |
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
|
Look in your manual under Trap Door loads. Hodgdon's site has 'em too. Any .45-70 load will kill those wee things ya'll call deer in Texas. snicker.
Bambi won't care how heavy the bullet is that kills him. And a cast bullet will do. Barnes makes a 250 grain TSX flat nose that'd probably be pleasant enough to shoot out of an 8 pound rifle. Only lever action data on their site, but Hodgdon has data. Hodgdon has cast 300 grain data too.
__________________
Spelling and grammar count! |
December 31, 2016, 02:34 PM | #4 |
Senior Member
Join Date: November 12, 2008
Location: Fort Worth, TEXAS
Posts: 909
|
Longest shots will be no more than 200yds.
The BCR has a 32" bbl Recoil doesn't bother me too much. Thanks!!! |
December 31, 2016, 04:51 PM | #5 |
Senior Member
Join Date: December 7, 2009
Location: Western New York
Posts: 2,736
|
I own, shoot, and hunt with several 45-70 rifles. I've killed a decent number of white tails with them. Any load will easily kill a deer. I have yet to recover even one bullet out of a deer I've shot, and that's at any angle or distance. I shoot 400+ grain bullets traveling at very modest velocities.....1350-1500fps. They are very easy on me and very hard on the deer. All loads out of this caliber will have some drop at 200yds. If you know the distance correctly,it's very easy to adjust to hit the animal. I've always found my best accuracy with my guns to be with bullets in the heavier weights. After keeping meticulous records on all my loads and the results, I suggest starting with a 400g bullet and which ever powder you have that is in a loading manual. Interesting enough, this is the least fussy caliber I've ever loaded for. It seems to like a lot of powders and shoots well with them. My personal favorite is Rel7 and 4198.
|
January 1, 2017, 04:17 AM | #6 |
Senior Member
Join Date: November 12, 2008
Location: Fort Worth, TEXAS
Posts: 909
|
Thanks for all of the info guys.
Does anybody have an HR Buffalo Classic Rifle? |
January 1, 2017, 05:46 AM | #7 |
Senior Member
Join Date: December 29, 2006
Posts: 155
|
I have but one 45-70, a Marlin 1895 GS and as previously noted just about any loading will easily take deer. My go to loading is 50 gr. IMR 3031 under a 300 grain jacketed soft or flat point usually Hornady but any brand will work just as well. I have gone up to 460 gr. lead flat points in the 1600 fps range but it is just too stout for me in that light of a gun (and no I am not especially recoil shy as I routinely shoot 338 LM and 300 WM without a problem, but in heavier guns).
Anyway, my answer is 300 gr at about 1600 fps and forget about it and put some venison in the freezer. Gary |
January 1, 2017, 11:02 AM | #8 |
Member
Join Date: November 19, 2015
Posts: 88
|
I also like to push a 300 grain bullet at around 1600 fps. I use 30 gr. of 2400 so I get a few more loads per pound of powder. I started using this load for my recoil sensitive brother's Marlin way back before the turn of the century and it has always worked very well. It is deadly, accurate and doesn't punish the shooter.
|
January 4, 2017, 07:27 AM | #9 |
Senior Member
Join Date: February 7, 2012
Posts: 299
|
I use a RCBS 300gr fpgc with 45gr Rl-7 under it at a chrono speed 0f 1650fps.
Very accurate from my Henry Steel. I can guarantee you that it will kill deer. |
January 4, 2017, 09:05 AM | #10 | |
Senior Member
Join Date: May 30, 2010
Location: Chicago 'Burbs
Posts: 543
|
Quote:
Sent from my SAMSUNG-SM-G900A using Tapatalk |
|
|
|