September 7, 2020, 08:35 AM | #1 |
Senior Member
Join Date: September 8, 2011
Posts: 255
|
105 Amax in a .243 Win
Have a Rem 700 .243 Win rifle. Been using Hornady 105 Amax bullets to see how they shoot and have found that I get many flyers. Apparantly the 9.25 twist in my rifle with its' original 22" barrel is too slow. I have a new 26" barrel on it with the same twist...is it possble that a 4" longer barrel might be enough to stabilize this bullet---or am I only dreaming?
|
September 7, 2020, 07:35 PM | #2 |
Senior Member
Join Date: June 15, 2008
Location: Georgia
Posts: 10,809
|
I doubt the 4" will make any difference, but who knows. The new barrel might shoot better regardless of length. Just give it a try and see what happens.
If you were going to the trouble to get a new barrel why not get it with a faster twist?
__________________
"If you're still doing things the same way you were doing them 10 years ago, you're doing it wrong" Winston Churchill |
September 8, 2020, 12:40 PM | #3 | |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,846
|
Quote:
If twist rate for the desired bullet is the problem, a longer barrel with the same twist won't change anything.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
|
September 8, 2020, 03:53 PM | #4 |
Senior Member
Join Date: February 8, 2010
Location: SC
Posts: 1,344
|
Have you tried other weights as well?
|
September 9, 2020, 06:59 AM | #5 |
Senior Member
Join Date: September 8, 2011
Posts: 255
|
jmr40
I got it on a closeout special a new Remington factory barrel. I plan on using Speer 70 TNT as my main bullet for it, but I had less than a full box of the Hornady 105 AMAXs that didn't do well in the original sporter barrel on the Rem700. |
September 9, 2020, 07:01 AM | #6 |
Senior Member
Join Date: September 8, 2011
Posts: 255
|
mxsailor803
Yes, I did and they all shot very well----Speer 70 TNT and 75 HPs, as well as a Hornady 87 SP. |
September 9, 2020, 08:57 AM | #7 |
Senior Member
Join Date: February 8, 2010
Location: SC
Posts: 1,344
|
Wally, that’s kinda what I was suspecting. Twist is just wrong. About the max I’ve seen a .243win accurate with a 100gr. That’s also the Sierra ProHunters. For some reason, all of my .243’s (4 700’s and 1 788) like that bullet. I’m not complaining lol. Just means it makes my consumables easier to keep in stock lol.
|
September 9, 2020, 09:33 AM | #8 |
Senior Member
Join Date: March 18, 2009
Location: Temple, TX
Posts: 959
|
@ Wallyl:
I used the Miller Gyroscopic stability factor formula (below) to check the twist, where S = gyroscopic stability factor (dimensionless) W = bullet weight (grains) T = twist (inches per turn) L = bullet length (inches), for plastic tipped bullets, ignore length of plastic tip D = bullet diameter (inches) S= [30*W*D(exp2)] / {(T)exp2*L*[(D)exp2 +(L)exp2]} "S" should be between 1.3 and 2.0. Best range is between 1.4 and 1.7. The formula is not as daunting as it looks. I couldn't figure out how to do superscripts, and so (T)exp2 means T squared. I used a bullet length of 1.06 inches for the 105 grain A-max and calculated an "S" of 1.73 for your parameters. So, the 105 A-max should stabilize. But these things are never precise and every gun is different. During my fifty years of shooting, I've had at least six .243's come and go, and still have two more in the safe. It seemed like none of them did their best with bullets in the 100 to 105 grain range. For deer hunting, I used a 95 grain nosler partition, and it worked fine. I hear, a lot, that the .243 Win is inherently accurate, but I never found that to be the case. Each rifle was bug hole accurate with one specific bullet weight and one particular powder, but it was never the same from rifle to rifle. I spent a lot of different powders and different bullets trying to fine that magic load, and it got frustrating pretty quickly. @mxsailor: I noted that you have a remington 788. Of all the .243's I've owned, my 788 was the most accurate. Unfortunately, it got stolen about 40 years ago. Last edited by hammie; September 10, 2020 at 05:49 PM. |
September 9, 2020, 11:44 AM | #9 | |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,846
|
Quote:
So long as you don't make a rush to judgement. IT could very well be other factors or a combination of other factors that make a given bullet unsuitable. it can even be the shooter's personal expectations. Take the .244 Remington for one example.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
|
September 9, 2020, 01:28 PM | #10 |
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
|
"...Apparently the 9.25 twist..." Is just fine. Mind you, Remington uses a 1 in 9.125" twist. That being the normal, 'standard', twist for the .243.
It's not about the barrel length. It's about the quality of the barrel and the load. Along with the trigger and the rest of the rifle. You will see an increase in velocity, but not a lot. A Rem M700 is a hunting rifle. An AMax is a match bullet. Hunting rifles may or may not shoot match bullets well. Is the thing bedded? The trigger been done? Lotta variables involved. Did you work up the load? Been using Speer 105 SP's(absolutely not a match bullet. Does astounding things to ground hogs though.) out of a 9.125 rifle for eons, with IMR4350.
__________________
Spelling and grammar count! |
September 10, 2020, 02:59 PM | #11 | ||||
Senior Member
Join Date: November 18, 2005
Location: On the Santa Fe Trail
Posts: 8,249
|
Quote:
It also could be your technique when shooting that's throwing the flyers. Practice makes perfect, so try to do everything the same way every time. I wouldn't go making changes to the rifle until you rule yourself out as much as you can. There also could be an issue with your load. Is it a flyer or a keyhole? Keyhole strikes are a sign of bullet instability, flyers are usually something else. If it is a flyer it is more than likely an issue in your load development. You'll need to check your load over a chronograph and check your SD and ES, if it's large you need to try different powders, powder charges, primers, and seating depths to find what your rifle likes. If you don't have extreme ES and SD, then check your ammunition for runout. Roll it across a small mirror and check bullet tips for wobble or get a concentricity gage from Hornady, Sinclair, RCBS, or ect. Straight ammunition shoots straighter to put it simply. Decapping your brass in a separate step and removing your expander ball from your sizing die greatly helps to reduce runout. If you can't get the A-Max to shoot don't worry about it, Hornady discontinued the 105 A-Max for the A-Tip and ELD-X & M bullets. However, the 105 HPBT by Hornady is a great bullet that should 100% stabilize in you your current barrel. Plus Hornady is still making that bullet for the foreseeable future. Quote:
Quote:
Quote:
__________________
NRA Life Member |
||||
September 10, 2020, 04:23 PM | #12 |
Senior Member
Join Date: January 3, 2006
Location: Brockport, NY
Posts: 3,717
|
WallyL, give them a try in your new barrel. It may or may not work well, but, until you try it you'll never know
I have 5 .243 win barrels, and all are 1 in 10. I get great results with 95 gr bullets, and decent groups with 100 gr Hornady BTSP. I have not tried your weight, since my rifles are just for hunting and shorter range target work.
__________________
You are the bows from which your children as living arrows are sent forth. |
September 10, 2020, 06:07 PM | #13 | |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,846
|
Quote:
My personal theory is basically, "to make damn sure"... Remington (again) badly misjudged the market with their .244 twist rate. Gun writers were touting the .243 Winchester as a dual purpose rifle, good for varmints and deer. Winchester's .243s had a 1-10" twist, which did acceptably well with both lighter bullets and the 100/105gr "deer" bullets of the day. Remington put a 1-12" twist in their .244 Rem, apparently with the thought it would be used as a varmint gun. The slower twist didn't stabilize "deer" bullets well, and the buying public was being told they wanted a dual purpose rifle and the .244 wasn't good at that. After the first year (or maybe 2) Remington changed the twist rate to 1 in 9", but the public had already made up their minds. Later, when Remington "repurposed" the .244 into the 6mm Remington, they had a 1 in 9" twist. Sales improved some, but its was never going to catch the .243 in popularity.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
|
September 11, 2020, 08:12 PM | #14 |
Senior Member
Join Date: September 8, 2011
Posts: 255
|
T O'Heir
It is a stock rifle...no bedding or trigger work. The barrel is a 26" target barrel made by Remington. I worked up the load I am using a powder Chg of 41.0 grains of AA 3100 w/CCI-200 primers. My thanks to all others that have responded...will try it out again early next week. |
September 14, 2020, 01:31 PM | #15 |
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
|
Hi. I'd be thinking the lack of bedding might be an issue. M700 triggers used to be adjustable.
"...Speer has discontinued that bullet..." SOB's discontinued the 90 grain FMJ too. Been crying for years now.
__________________
Spelling and grammar count! |
September 14, 2020, 03:51 PM | #16 |
Senior Member
Join Date: October 9, 2009
Location: North Alabama
Posts: 8,312
|
.243
For sometime I was a .243 basher and did not believe it was a reliable deer cartridge. I was repeating the lines many of my elders spoke in my youth, all were .30 cal and heavy bullet believers. My Dad strayed from the faith a bit, bought a .243 as a varminter, shot it well, and began to kill deer with it too. Accordingly, when Dad's .243 came my way, I hunted it a bit for nostalgia, and bamaboy killed several with it as well. I say all that to lead up that I have worked with the .243 a bit in the last 10 yrs or so and noticed some trends in my two rifles. Dad's is an early Savage 110 with docked barrel at 21" and the other a Mossberg 800M carbine with a 20" tube.
Both shoot 100 grain slugs with hunting accuracy, the Savage a bit better than the Mossy. The rather rare Mossberg 800M will shoot bugholes with lighter 85 grain bullets, the Savage responds as well, but not so dramatically. The jury is still out on my confidence level with the lighter bullets on deer, but hit right, they get dead, no exits wounds yet. Speer's not made that 105 gr RN that O'HEIR mentions, in ages! |
September 14, 2020, 04:17 PM | #17 |
Senior Member
Join Date: June 23, 2013
Location: Central Taxylvania..
Posts: 3,609
|
Wally,
My wife used to have a Rossi R243 that absolutely loved Hornady 105gr Match bullets over a charge of RL26. Twist was 1:10, so was slower than yours. Hornady told me in no uncertain terms that the 105 would NOT stabilize in a 1:10. But had no issues with it out to 500 yards. (Furthest we got to shoot it before trading on another rifle).
__________________
When our own government declares itself as "tyrannical", where does that leave us??!! "Januarary 6th insurrection". Funny, I didn't see a single piece of rope... |
September 16, 2020, 07:07 PM | #18 | |
Senior Member
Join Date: December 10, 2012
Posts: 6,165
|
Quote:
Having said that, 4" will definitely affect stability of a marginally stable bullet. Velocity stabilizes bullets by spinning them faster. You can stabilize bullets in a 1-10 22-250 that you have to be 1-8 in a .223 to stabilize. |
|
September 19, 2020, 09:02 PM | #19 |
Senior Member
Join Date: September 8, 2011
Posts: 255
|
I tried them and got 8" groups at 50 yards; all of the bullet holds in the cardboard were straight holes; so the bullets weren't yawing at that distance. I have 20 left. I plan on machining the tips off making them 90 grains, just to use them up.
|
September 20, 2020, 08:51 AM | #20 |
Senior Member
Join Date: June 18, 2009
Location: Boston
Posts: 562
|
I have shot Sierra 107s out of a Savage Model 14 Sporter. Believe from memory it also has a 9-1/4 twist. According to Sierra, 9-1/4 isn't fast enough for the 107s, but I guess my rifle didn't get the memo. Dings a 10" plate at 500 yards five out of fives times, all the time. At one time, I won enough bets with that rifle and load to buy lunch. Sadly, no one will bet me any more.
|
September 20, 2020, 09:24 PM | #21 |
Senior Member
Join Date: April 20, 2009
Location: Helena, AL
Posts: 4,424
|
75 and 87gr Hornady VMAX shoot to the same POI and .5" in my 700 with ERShaw Barrel with a 9" twist. I bought a couple of boxes of 95gr Federal Fusion to have my Smith throat and test. They shot .5", too.
__________________
Reloading For: 223R, 243W, 6.5 GR, 6.5 CM, 260R, 6.5-06, 280R, 7mmRM, 300HAM'R, 308W, 30-06, 338-06, 9mm, 357M, 41M, 44SPL, 44M, 45 ACP, 45 Colt, 450BM. |
September 22, 2020, 10:56 AM | #22 |
Senior Member
Join Date: October 14, 2012
Location: North Central, PA
Posts: 2,117
|
Years ago I was shooting a Remington 700 sps Varmint in 243 win with the same twist rate. Also using the 105 Amax and H4350. I had no problems stabilizing that bullet. In fact it shot very well. Sub half minute groups were the norm.
__________________
“We do not seek peace in order to be at war, but we go to war that we may have peace. Be peaceful, therefore, in warring, so that you may vanquish those whom you war against, and bring them to the prosperity of peace. – St. Augustine |
October 1, 2020, 07:31 AM | #23 |
Senior Member
Join Date: January 24, 2016
Location: NOLA
Posts: 203
|
OP, it is possible that your new barrel will stabilize the 105 Amax. You'll never know until you try.
What is it that you want the Amax to do that any one of the many match grade 95-100 grain 243 bullets won't do? |
October 2, 2020, 02:52 PM | #24 |
Senior Member
Join Date: September 8, 2011
Posts: 255
|
Drantab I tried in the new barreled Rem700..8" groups at 50 yards.
I got a box just to try them out...they were one sale. I had read that some had good results with them so I took a chance. |
October 11, 2020, 10:08 PM | #25 |
Senior Member
Join Date: December 22, 2015
Posts: 887
|
Results can be surprising at times. My Ruger American in 243 does fine with 100 gr bullets, but won't produce something resembling a group with 105 gr. HPBT Match bullets. The extra length and mass combine to de-stabilize the match bullets even in the case of my 1 in 9" twist barrel. Berger's bullet stability calculator even suggests as much, recommending a 1 in 7.75" or faster twist for that HPBT Match bullet.
|
|
|