|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
June 3, 2009, 06:49 PM | #1 |
Junior Member
Join Date: June 3, 2009
Location: Windber, PA
Posts: 1
|
Rem. 788 22-250 Extractor
Guys i'm in need of some help on replacing the extractor and having it fit correctly. I've wrecked 3 extractors already. There goes 60 bucks!!
The problem i'm having is when i put the extractor in it sits to far back. I've tried bending the loose end straight, in, out and still can't get it to work. Then when i try to pull it out i wreck it. It seems that you have to get it right the first time or else. This extractor is the one with 1 rivet. I don't want to take this to a gunsmith, I want to learn how to do this properly. Any tips on this. The extractor i use is from numrich. |
June 4, 2009, 06:57 PM | #2 |
Senior Member
Join Date: February 4, 2006
Posts: 206
|
DAVE: It may not be you. I've gotten a few extractors that were too brittle, and they can give you a fit. There are several books and web sites that show the proper way to set them.
|
|
|