|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
February 27, 2021, 06:19 PM | #1 |
Senior Member
Join Date: March 5, 2009
Location: Uh-Hi-O
Posts: 3,006
|
Best way to clean aluminum baffles
I just got my old Trident-9 back from being jail broke. I fired 150 rounds through it and took it apart. The baffles barely wanted to budge at first. I covered them in Hoppe's 9 and scrubbed them with a tooth brush. On reassembly I had trouble getting the baffles back into the tube.
I think I am going to have to get a 1 1/4" brush to clean the inside of my suppressor tube. But there has to be a better way to clean the baffles. The 9 and toothbrush didn't seem to do a very good job. So how do you guys clean your pistol cans? I thought about getting an ultrasonic cleaner but I read that they can be harmful to aluminum.
__________________
"9mm has a very long history of being a pointy little bullet moving quickly" --Sevens |
February 27, 2021, 07:01 PM | #2 |
Senior Member
Join Date: April 3, 2010
Location: Texas
Posts: 1,394
|
Check this link out, good information.https://proreviewbuzz.com/cleaning-a...in%20and%20dry.
__________________
ONLY TWO DEFINING FORCES HAVE GIVEN UP THEIR LIVES FOR YOU. ONE IS JESUS CHRIST FOR YOUR SOUL AND THE OTHER IS THE AMERICAN SOLDIER FOR YOUR FREEDOM. |
March 2, 2021, 02:21 PM | #3 |
Senior Member
Join Date: March 5, 2009
Location: Uh-Hi-O
Posts: 3,006
|
That was a long way to say soak it in Ed's Red.
__________________
"9mm has a very long history of being a pointy little bullet moving quickly" --Sevens |
March 5, 2021, 09:25 AM | #4 |
Senior Member
Join Date: March 20, 2011
Location: Willamina, OR
Posts: 1,908
|
|
|
|