1st 9mm loads on target.

Reloader2 · July 29, 2013, 10:01 PM

I loaded these using a powder measure to meter 4.3 grains of Titegroup.
ImageUploadedByTapatalk1375153311.351038.jpg

Mike / Tx · July 30, 2013, 04:03 AM

With the exception of the two sighters on the left that is a great group...

Seriously great job there.

Reloader2 · July 30, 2013, 03:14 PM

I'm not much of a shot with any gun so it doesn't reflect much on the pistol or ammo. I was happy just to get them to cycle through the gun.

SVTCobra306 · July 30, 2013, 06:03 PM

Congrats! Loaded up my first 9mm last week also.. worked a ladder up to 6.0 gr of Power Pistol under a 115 gr Remington FMJ, OAL of 1.110 based on measuring factory Remington UMC rounds. Mine functioned flawlessly once I got to 5.6 grains, I think I'll stay at 6.0, my accuracy is where I want it and everything works well

noylj · July 31, 2013, 01:46 PM

Good, but accuracy is not something one can judge well at 15 feet.
Have fun.

Stuey · July 31, 2013, 02:43 PM

Where did you get that form from that shot at? I have not seen that before and would like to get some for my reloads.

Reloader2 · July 31, 2013, 02:51 PM

The target is one I made up on the computer. I have several variations.

Reloader2 · July 31, 2013, 02:55 PM

Does Power Pistol feed well through a powder measure?

iraiam · July 31, 2013, 06:12 PM

Quote:

Does Power Pistol feed well through a powder measure?

Yes, both my powder measures throw accurate charges with PP, one is a Dillon on the loader, the other is a stand alone RCBS powder measure.

skizzums · July 31, 2013, 06:36 PM

I am also doing 9mm right now with titegroup, I have had a much better experience using less powder, you should try some at 3.5gr and go up from there. I stick with 3.8 now for the best accuracy for myself.

July 29, 2013, 10:01 PM	#1
Reloader2 Senior Member Join Date: June 18, 2013 Posts: 263	1st 9mm loads on target. I loaded these using a powder measure to meter 4.3 grains of Titegroup. ImageUploadedByTapatalk1375153311.351038.jpg

July 30, 2013, 04:03 AM	#2
Mike / Tx Senior Member Join Date: April 8, 2000 Posts: 2,101	With the exception of the two sighters on the left that is a great group... Seriously great job there. __________________ LAter, Mike / TX

July 30, 2013, 03:14 PM	#3
Reloader2 Senior Member Join Date: June 18, 2013 Posts: 263	1st 9mm loads on target. I'm not much of a shot with any gun so it doesn't reflect much on the pistol or ammo. I was happy just to get them to cycle through the gun.

July 31, 2013, 02:51 PM	#7
Reloader2 Senior Member Join Date: June 18, 2013 Posts: 263	1st 9mm loads on target. The target is one I made up on the computer. I have several variations.

July 31, 2013, 02:55 PM	#8
Reloader2 Senior Member Join Date: June 18, 2013 Posts: 263	1st 9mm loads on target. Does Power Pistol feed well through a powder measure?

July 30, 2013, 06:03 PM	#4
SVTCobra306 Senior Member Join Date: March 18, 2013 Posts: 434	Congrats! Loaded up my first 9mm last week also.. worked a ladder up to 6.0 gr of Power Pistol under a 115 gr Remington FMJ, OAL of 1.110 based on measuring factory Remington UMC rounds. Mine functioned flawlessly once I got to 5.6 grains, I think I'll stay at 6.0, my accuracy is where I want it and everything works well

July 31, 2013, 01:46 PM	#5
noylj Senior Member Join Date: October 21, 2007 Location: Between CA and NM Posts: 858	Good, but accuracy is not something one can judge well at 15 feet. Have fun.

July 31, 2013, 02:43 PM	#6
Stuey Junior Member Join Date: June 29, 2013 Location: Maumelle, AR Posts: 6	Where did you get that form from that shot at? I have not seen that before and would like to get some for my reloads.

July 31, 2013, 06:36 PM	#10
skizzums Senior Member Join Date: July 1, 2013 Location: Douglasville, Ga Posts: 4,615	I am also doing 9mm right now with titegroup, I have had a much better experience using less powder, you should try some at 3.5gr and go up from there. I stick with 3.8 now for the best accuracy for myself.