AR15 stock choices for N.J.

solman · July 25, 2012, 10:10 AM

Well the title just about says it all. Looking to finish up my build on an AR. using 16" upper from PSA as well as one of their lower parts kit on their lower. My intended use is mostly target/paper at up to 200 yds. I was going to go with a Nikon M223 with a 1-4x20 for my scope on a burris mount.
Having PSA pin a compensator on the barrel for NJ compliance but I'm not sure if I can use an M4 stock pinned to my liking or should I just go with an A2 type stock?
Any help and insight is much appreciated.
solman

Horny Toad · July 25, 2012, 01:29 PM

You can do either pinned or A2. As long as it isn't adjustable, you're good to go. If you're looking for a short A2 style, something like this would be nice: http://www.rockriverarms.com/index.c...ategory_id=299

Or maybe this: http://www.rockriverarms.com/index.c...ategory_id=540

pturner67 · July 25, 2012, 07:45 PM

I have a Magpul ACS...the cheek weld on it is perfect

http://www.midwayusa.com/product/231...bine-synthetic

sailskidrive · July 26, 2012, 10:23 AM

Have you considered a skeleton stock?

Captains1911 · July 26, 2012, 10:30 AM

If I was forced to use a non-adjustable stock I would probably go either A1 or A2.

July 25, 2012, 10:10 AM	#1
solman Junior Member Join Date: October 25, 2011 Posts: 14	AR15 stock choices for N.J. Well the title just about says it all. Looking to finish up my build on an AR. using 16" upper from PSA as well as one of their lower parts kit on their lower. My intended use is mostly target/paper at up to 200 yds. I was going to go with a Nikon M223 with a 1-4x20 for my scope on a burris mount. Having PSA pin a compensator on the barrel for NJ compliance but I'm not sure if I can use an M4 stock pinned to my liking or should I just go with an A2 type stock? Any help and insight is much appreciated. solman

July 25, 2012, 01:29 PM	#2
Horny Toad Senior Member Join Date: February 9, 2000 Location: NJ Posts: 191	You can do either pinned or A2. As long as it isn't adjustable, you're good to go. If you're looking for a short A2 style, something like this would be nice: http://www.rockriverarms.com/index.c...ategory_id=299 Or maybe this: http://www.rockriverarms.com/index.c...ategory_id=540 __________________ NRA Life Member We Don't Need No Steenking 2nd Amendment

July 26, 2012, 10:23 AM	#4
sailskidrive Senior Member Join Date: October 26, 2008 Posts: 726	Have you considered a skeleton stock? __________________ SailSkiDrive Hk USP 45 Expert, USP 40, USP 9, SIG P226, S&W M&P9, Hk 4, Makarov, Desert Eagle 40, Beretta FS92 Centurion, Kimber TLEII 1911A1, Glock 22, SIG P225, 1943 Rem Rand 1911A1, S&W mod 64, Walther PPQ, SIG P229, Browning BDA 45 (SIG P220), Hk45, SIG P230

July 25, 2012, 07:45 PM	#3
pturner67 Senior Member Join Date: February 26, 2006 Posts: 737	I have a Magpul ACS...the cheek weld on it is perfect http://www.midwayusa.com/product/231...bine-synthetic

July 26, 2012, 10:30 AM	#5
Captains1911 Senior Member Join Date: November 18, 2009 Location: West of the Blue Ridge, VA Posts: 684	If I was forced to use a non-adjustable stock I would probably go either A1 or A2.