|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
August 22, 2010, 01:28 PM | #1 |
Junior Member
Join Date: August 22, 2010
Posts: 1
|
FIE black powder pistol
My husband and I got our first black powder pistol FIE made in Italy patent n L4182 is all the info on the gun. Does anyone know any history or where I can search the serial number?
|
August 22, 2010, 01:39 PM | #2 |
Senior Member
Join Date: April 25, 2010
Location: Arkansas
Posts: 3,309
|
.....uh.....FIE?????
|
August 22, 2010, 01:42 PM | #3 |
Senior Member
Join Date: April 24, 2010
Location: Ohio
Posts: 581
|
FIE is not the maker that stands for Firearms Import Export. There should be other markings on the gun that will indicate the maker also there will be a square box on the frame with two letters in it. Those are the proof codes and will indicate the date of manufacture.
|
August 22, 2010, 10:38 PM | #4 |
Senior Member
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,772
|
FIE's imports are often found to not have the usual Italian maker's marks or proof date marks. I think it will be unusual if her gun has them.
The patent number is a reproduction of Colt's original patent marking, so it provides no information as to the gun's heredity. |
August 22, 2010, 10:49 PM | #5 |
Senior Member
Join Date: April 14, 2009
Location: Sunny Southern Idaho
Posts: 1,909
|
Yes, I think that we've been down this path with FIE-marked guns - somebody was trying to track down manufacturers a while back and I believe that we discovered that there wasn't much information to be found.
Try a search on FIE and you should be able to come up with a thread or two on the subject.
__________________
Well we don't rent pigs and I figure it's better to say it right out front because a man that does like to rent pigs is... he's hard to stop - Gus McCrae |
August 22, 2010, 11:39 PM | #6 |
Senior Member
Join Date: April 24, 2010
Location: Ohio
Posts: 581
|
Hmmm! You learn something new every day. I wasn't aware of the lack of markings on FIE products. Makes me wonder if they are a case of having parts manufactured in Italy and shipped here for assembly that would explain the lack of proof marks and makers marks. I can't imagine an Italian gunmaking firm exporting complete firearms without proofing. The European countries seem to be pretty serious about those laws.
What do you guys think? Any speculation. |
August 22, 2010, 11:41 PM | #7 |
Senior Member
Join Date: November 29, 2007
Location: Everett, WA
Posts: 6,126
|
Look under the lever beneath the barrel. If it's a black powder revolver. |
August 23, 2010, 02:30 AM | #8 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Paintergirl
Welcome to the forum.
Could you post some photos of the pistol?
__________________
Seek truth. Relax. Take a breath. |
August 23, 2010, 03:10 AM | #9 |
Senior Member
Join Date: March 2, 2010
Location: France
Posts: 108
|
hi all
As you may remember, we did posted some thread about FIE and there are some info to read on the search board of the forum... I remember that FIE is an old Importer of Italians replica manufacturer (but i don't know who is it or are they - I guess they are less 3 or 4) around 1970 to 1975 and provide some Colt model (1848, 1851) & Texas Remignton at this periode, specially for the U.S market consumer. Sometime, marks are not completly engraved on the revolver, but always the Italian proof are stamped. There are few models with barrel provided by specialist as Orion. Many FIE revolver are stamped PR, and that may be mean : "Assuming that the marks are Italian, my guess is that PR may represent either "PATRO di Palama Roberto - Verdello 1976" or "Pierino Ruschetta" " or also a code to import gun with approuved test. The FIE revolver are cheap and i guess these are not a realy fine replica as Uberti, Pietta, Euroarms, ASM, or Palmetto. FIE was buy by EIG in early 1980 and become TITAN and didn't keep the C&B market, to provide only modern semi auto pistol. Seb |
August 23, 2010, 05:46 AM | #10 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Here are some photos
These photos completely agree with Sebou's comments.
This is an 1851 Navy pattern in .44 cal brass frame. I have shot this pistol but not very much. I bought it at a gun show not working. It needed a trigger/bolt spring. A spring from DGW worked.
__________________
Seek truth. Relax. Take a breath. |
August 23, 2010, 06:30 AM | #11 |
Senior Member
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,772
|
Denster: Just a clarification: I did not mean to imply that FIE guns did not have Italian proof house marks. It's the proof date code that is often, but not always, missing.
FIE was based in Florida and was only an importer. They specified no manufacturer's marks on the guns, a practice that was often followed by EMF in California and still is by other importers for special orders. |
August 23, 2010, 07:16 AM | #12 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
AND.....
Mykeal,
The only FIE that I own does not appear to have any serial numbers They would have to be marked internally as I am able to see no SN on the pistol. Does this comport with your experience?
__________________
Seek truth. Relax. Take a breath. |
August 23, 2010, 01:08 PM | #13 |
Senior Member
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,772
|
Doc, Yes it does, but frankly I wouldn't be surprised at any markings, or lack of markings, on any gun with the FIE brand. There doesn't seem to be any real 'rule' one can count on, except perhaps the lack of a manufacturer's logo.
|
August 23, 2010, 01:38 PM | #14 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Mykeal
I know that FIE does not have a great reputation for quality but the one I have is really not all that bad. Finish is pretty good. Action inspires confidense. Parts fit together. I thought that I had shot this thing a coupla times but now I can't say for sure. I know I have never had it apart which says to me that I have never shot it. Most of the time, if I shoot something I take it down to parade rest to clean it.
So I don't know how it shoots. Is the FIE negative reputation supported by you observations?
__________________
Seek truth. Relax. Take a breath. Last edited by Doc Hoy; August 23, 2010 at 01:49 PM. |
August 23, 2010, 07:09 PM | #15 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
|
I have a brass framed Remington Navy with PR and FIE on the butt, along with the serial number 591 and a large G just above it and to the right. It also has made in Italy on the butt. It has the standard Italian proof marks and date code (AD). It has black powder only on one of the lower barrel flats but is stamped upside down. The gun is a good shooter but the hammer comes down solid on the nipples, enough that the hammer isn't fully down. The hammer also wont engage the safety notches(too wide). The rear sight groove is really wide and deep. I would post pics but my desktop died and my laptop isn't fast enough on dialup to upload pics.
|
August 23, 2010, 08:54 PM | #16 |
Senior Member
Join Date: April 14, 2008
Location: Stuart, VA
Posts: 2,473
|
I have a baby dragoon with the same FIE marks as on the butt in the picture above. Crappiest replica I have. All kinds of cosmetic birth defects. Shoots good though !!
__________________
Liberty and freedom often offends those who understand neither. |
August 24, 2010, 06:42 AM | #17 |
Senior Member
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,772
|
Doc, The 3 FIE guns I've handled (I don't personally own one) were all used and not fine examples of the gunmaker's art. I'd say they were decent working guns, not barbecue guns. Very hard to say if they were originally nice guns that had been used hard or poor quality that had seen limited use, so I don't really have an opinion about the quality of the marque.
|
August 24, 2010, 09:10 AM | #18 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Mykeal
Tnx,
Mine is not great original quality but it is used very little. I am going to examine it more closely but I would not characterise it the way that noelf presents his. I agree that I would not go out and look for another FIE so in that was it is at the very low end of my own pistols. Nor does mine have the two hammer problems that Hawg mentioned. Maybe if I would shoot it I would feel differently.
__________________
Seek truth. Relax. Take a breath. |
August 24, 2010, 08:38 PM | #19 |
Senior Member
Join Date: April 14, 2008
Location: Stuart, VA
Posts: 2,473
|
I've seen other FIEs that were much better finished than mine. I'm not trying to present them all as poorly finished. I had a problem with the wedge and the arbor a year or two ago, but managed to get that worked out. Even so, I still like it and have had it for 32 years (my first BP revolver). Popped rabbits with it when I was teenager.
__________________
Liberty and freedom often offends those who understand neither. |
August 25, 2010, 04:58 AM | #20 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
noelf
Yes, I think our feelings on the issue are essentially the same. What I can say about mine is that it hasn't embarrassed me yet.
__________________
Seek truth. Relax. Take a breath. |
November 2, 2010, 01:37 PM | #21 |
Junior Member
Join Date: November 2, 2010
Posts: 1
|
36 cal FIE Remington
Does anyone know what size nipples for a 36 cal FIE Remington revolver?
|
November 3, 2010, 12:27 PM | #22 | |
Senior Member
Join Date: March 15, 2005
Location: Central Connecticut
Posts: 3,166
|
Quote:
http://thefiringline.com/forums/show...15&postcount=5 And if no one else can provide a definitive answer then you might try giving one of the following outfits a call. Bloomquist Percussion Works is a very helpful & reputable outfit that makes custom nipples and offers them in "revolver nipple kits". They also have a toll free phone number: 1-800-337-1243 The Blomquist website is currently down but they invite phone inquiries and are willing to share their knowledge and experience: http://blomquistpercussionworks.com/products.html Or ask these other pistol parts specialists: http://www.vtigunparts.com/ For Army San Marco pistols: Deer Creek Products 765-525-6181 Last edited by arcticap; November 3, 2010 at 06:03 PM. |
|
November 3, 2010, 01:10 PM | #23 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
By the way
Welcome to the congregation, revwar. You came to the right place.
__________________
Seek truth. Relax. Take a breath. |
November 6, 2010, 09:14 AM | #24 |
Junior Member
Join Date: November 6, 2010
Location: Athens, OH
Posts: 6
|
Here's some info on mine:
Brass frame Squareback trigger guard Serial number on frame and barrel .31 cal. Stagecoach robbery scene on cylinder filled in with gold paint Barrel and cylinder look to be painted then lacquered over Date code AC (1977) 5 5/8" barrel Interlaced PR, FIE and Italy on butt Proof marks on barrel and frame Metal to metal fit on this is very good but a lot of sanding marks not polished out. Front sight crooked. As my wife would say "a little rough around the edges". It shoots well, doesn't misfire and is fairly accurate. Mechanically sound although the loading lever is fairly loose. I don't think it had ever been fired before. |
November 6, 2010, 01:22 PM | #25 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Welcome Allison
You came to the right place.
Loose loading lever is not uncommon. The fact that the metal was not properly finished before bluing is disappointing. It is a shortcut that was taken by some of the Italian manufacturers. I doubt that it saved that much time but it really makes the pistol look less than optimal.
__________________
Seek truth. Relax. Take a breath. |
|
|