The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old November 13, 2018, 03:36 PM   #1
vts
Senior Member
 
Join Date: January 31, 2006
Location: Norway
Posts: 242
L-frame tools and tool kit.

I just got my first L-frame, 986.
Those of you who shoot them regularly. What tools do find useful and practical?

Brownells got a few screwdrivers kits.
What kit would you recommend?
__________________
California, The Land Of the Not So Free.
Flinch and you'll be chasing your head down Fifth Street! Joe Friday.
http://www.chuckhawks.com/825_magnum.htm Why not a .88 magnum?
vts is offline  
Old November 13, 2018, 04:09 PM   #2
HighValleyRanch
Senior Member
 
Join Date: July 15, 2005
Posts: 4,063
A reloading press and dies!LOL
__________________
From the sweet grass to the slaughter house; From birth until death; We travel between these two eternities........from 'Broken Trail"
HighValleyRanch is offline  
Old November 14, 2018, 12:32 AM   #3
vts
Senior Member
 
Join Date: January 31, 2006
Location: Norway
Posts: 242
9x19 is to cheap to reload.

However at tool like this
https://www.brownells.no/TOOLS-FOR-B...ELLS-080920000
Could be of interest.
__________________
California, The Land Of the Not So Free.
Flinch and you'll be chasing your head down Fifth Street! Joe Friday.
http://www.chuckhawks.com/825_magnum.htm Why not a .88 magnum?
vts is offline  
Old November 14, 2018, 09:15 AM   #4
highpower3006
Senior Member
 
Join Date: July 30, 2011
Location: Savannah TN
Posts: 1,217
Just put the tools down and step away from the workbench.

Resist the urge to work on your gun. I have had a L frame Smith for many years and it has never given me a single issue. In all my 45+ years of shooting and collecting guns, I have seen FAR more damage done by ill advised amature gunsmithing than was ever done by honest use.
highpower3006 is offline  
Old November 14, 2018, 11:01 AM   #5
MrBorland
Senior Member
 
Join Date: May 31, 2007
Location: NC
Posts: 2,614
A cleaning kit, a kydex holster, a bunch of moonclips, a BMT mooner, and lots of ammo or reloading supplies
MrBorland is offline  
Old November 14, 2018, 12:19 PM   #6
T. O'Heir
Senior Member
 
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
"...screwdrivers kits..." Over priced and unnecessary. Especially the so-called "Gunsmiths" sets. Anything with that word in its name will just cost more. The 'bits' are designed to break before the screw head gets damaged. However, they're pricey and sometimes difficult to find replacements.
A regular screwdriver from Wally World will do the same job. A regular screw driver can be ground to fit the screw head slot.
The only tool you'd need from Brownell's and only if you do a trigger job, is the rebound slide/spring housing tool. It's used in nearly all Smith revolvers.
If you don't plan on doing a trigger job yourself, you don't need any tools. Just a cleaning kit that you probably have already.
__________________
Spelling and grammar count!
T. O'Heir is offline  
Old November 14, 2018, 01:19 PM   #7
arquebus357
Senior Member
 
Join Date: December 19, 2016
Location: Atlanta, Georgia area
Posts: 455
I respectfully disagree. The "gunsmith" labeled kits have a greater selection of flat heat screwdriver tips. The kits from wallyworld, harbor freight, etc, Have more phillips head, torx, allen key, etc.
arquebus357 is offline  
Old November 14, 2018, 01:22 PM   #8
vts
Senior Member
 
Join Date: January 31, 2006
Location: Norway
Posts: 242
I might do another trigger job. Hammer will be replaced.
Most springs will also be replaced.
Since I no longer have my gunsmith tools. A tool kit is a convenient way to get what I need.
It might be overpriced. But a screwdriver that fits makes my life easier.

Spring housing tool is noted.
__________________
California, The Land Of the Not So Free.
Flinch and you'll be chasing your head down Fifth Street! Joe Friday.
http://www.chuckhawks.com/825_magnum.htm Why not a .88 magnum?
vts is offline  
Old November 14, 2018, 02:13 PM   #9
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 18,486
Brownells catalogs "S&W screwdrivers" but user comments say they are not always matched to the screws on a given gun.
Read the comments and you can get an idea of what bits they added; if you don't want to splurge on the big set with a lot of bits you may never use.

The rebound spring tool is handy, and of course a soft face hammer.
Jim Watson is offline  
Old November 14, 2018, 02:44 PM   #10
FITASC
Senior Member
 
Join Date: December 6, 2014
Posts: 6,432
Quote:
Just put the tools down and step away from the workbench.

Resist the urge to work on your gun. I have had a L frame Smith for many years and it has never given me a single issue. In all my 45+ years of shooting and collecting guns, I have seen FAR more damage done by ill advised amature gunsmithing than was ever done by honest use.
^^^^THIS!
Only specific tool I own is the rebound slide tool, but that can be made form an old screwdriver or by using a ballpoint pen; you don't even need a soft hammer when the wooden or plastic handle of any regular hammer will do for whacking the frame to loosen the slide plate.

The only real tool would be the ones used for loading and unloading the brass from the moonclips
__________________
"I believe that people have a right to decide their own destinies; people own themselves. I also believe that, in a democracy, government exists because (and only so long as) individual citizens give it a 'temporary license to exist'—in exchange for a promise that it will behave itself. In a democracy, you own the government—it doesn't own you."- Frank Zappa
FITASC is offline  
Old November 14, 2018, 11:11 PM   #11
vts
Senior Member
 
Join Date: January 31, 2006
Location: Norway
Posts: 242
I tried to find S&W tool kits on Brownells. I live in Norway and I must use Brownells.no.
Struggling to find what I need.
__________________
California, The Land Of the Not So Free.
Flinch and you'll be chasing your head down Fifth Street! Joe Friday.
http://www.chuckhawks.com/825_magnum.htm Why not a .88 magnum?
vts is offline  
Old November 15, 2018, 07:47 AM   #12
FITASC
Senior Member
 
Join Date: December 6, 2014
Posts: 6,432
What do you THINK you need?
__________________
"I believe that people have a right to decide their own destinies; people own themselves. I also believe that, in a democracy, government exists because (and only so long as) individual citizens give it a 'temporary license to exist'—in exchange for a promise that it will behave itself. In a democracy, you own the government—it doesn't own you."- Frank Zappa
FITASC is offline  
Old November 15, 2018, 08:05 AM   #13
Nanuk
Senior Member
 
Join Date: January 2, 2005
Location: Where the deer and the antelope roam.
Posts: 3,082
A screw driver to fit the adjustable sight and the grip screw if you want to change grips.
__________________
Retired Law Enforcement
U. S. Army Veteran
Armorer
My rifle and pistol are tools, I am the weapon.
Nanuk is offline  
Old November 15, 2018, 08:22 AM   #14
FITASC
Senior Member
 
Join Date: December 6, 2014
Posts: 6,432
Preferably with hollow ground tips and not the cheap stuff from the local hardware store
__________________
"I believe that people have a right to decide their own destinies; people own themselves. I also believe that, in a democracy, government exists because (and only so long as) individual citizens give it a 'temporary license to exist'—in exchange for a promise that it will behave itself. In a democracy, you own the government—it doesn't own you."- Frank Zappa
FITASC is offline  
Old November 15, 2018, 09:05 AM   #15
Ricklin
Senior Member
 
Join Date: February 22, 2008
Location: SW Washington state
Posts: 1,996
Gunsmith screwdrivers

Hardware store screwdrivers? Won't be buying any used guns from them.

If you must grind a screwdriver be very aware of the heat of grinding. Keep the steel cool. Grind and quench, grind and quench, ad infinitum...

An instant "no sale" is buggered screws. They are a red flag and indicative of the issues you can't see.

Quality hollow ground screwdrivers, I like Wiha, not cheap. I have Wiha drivers that were used when I bought them, and I have had them more than twenty years.
There is no requirement that they be labeled gunsmith, they must fit, close only counts in hand grenades and nukes. They must fit! The gunsmith sets typically have far more sizes of common screw drivers.
__________________
ricklin
Freedom is not free
Ricklin is offline  
Old November 15, 2018, 09:56 AM   #16
Don P
Senior Member
 
Join Date: December 17, 2005
Location: Swamp dweller
Posts: 6,187
Quote:
L-frame tools and tool kit.
Get this before you break out the tools
https://www.brownells.com/gunsmith-t...prod73553.aspx
__________________
NRA Life Member, NRA Chief Range Safety Officer, NRA Certified Pistol Instructor,, USPSA & Steel Challange NROI Range Officer,
ICORE Range Officer,
,MAG 40 Graduate
As you are, I once was, As I am, You will be.
Don P is offline  
Old November 15, 2018, 10:18 AM   #17
MrBorland
Senior Member
 
Join Date: May 31, 2007
Location: NC
Posts: 2,614
Quote:
Originally Posted by vts
I might do another trigger job. Hammer will be replaced.
Most springs will also be replaced.
Since I no longer have my gunsmith tools. A tool kit is a convenient way to get what I need.
It might be overpriced. But a screwdriver that fits makes my life easier.
Quote:
Originally Posted by vts
I tried to find S&W tool kits on Brownells. I live in Norway and I must use Brownells.no.
Struggling to find what I need.
Really, IMO, assuming the revolver's in spec, the only tools you'd need for an action job are screwdrivers, a rebound slide spring tool, and a good Arkansas or ceramic stone, and some fine oil.

Screwdriver set:
https://www.brownells.com/gunsmith-t...r-prod413.aspx

Rebound slide spring tool:
https://www.brownells.com/gunsmith-t...l-prod774.aspx

Arkansas stone:
https://www.brownells.com/search/ind...arkansas+stone

...or ceramic:
https://www.brownells.com/gunsmith-t...s-prod799.aspx

If you're going to shoot lead bullets, now might be a good time to invest in a Lewis Lead Remover:
https://www.brownells.com/gun-cleani...prod21587.aspx

And definitely look into a mooner/demooner.

If you've never worked on a revolver, the Kuhnhausen manual linked above is a very good investment. And definitely go through this excellent thread on proper disassembly and assembly before jumping in:
https://www.thehighroad.org/index.ph...ussion.397027/
MrBorland is offline  
Old November 15, 2018, 11:09 AM   #18
reddog81
Senior Member
 
Join Date: October 16, 2014
Location: Iowa
Posts: 1,633
Lot's of moonclips, targets and bullets. That's all that is needed.
reddog81 is offline  
Old November 15, 2018, 02:21 PM   #19
vts
Senior Member
 
Join Date: January 31, 2006
Location: Norway
Posts: 242
MrBorland. Those links are in my notes. Thank you.
I just ordered plenty of moon clips.

Mooner/demooner came with the gun.
__________________
California, The Land Of the Not So Free.
Flinch and you'll be chasing your head down Fifth Street! Joe Friday.
http://www.chuckhawks.com/825_magnum.htm Why not a .88 magnum?
vts is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:31 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.06432 seconds with 8 queries