|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
February 3, 2018, 01:49 PM | #1 |
Junior Member
Join Date: February 1, 2011
Posts: 1
|
Miroku - Ultra Hi Parts Inquiry
I need a hammer for a Miroku Kentucky rifle imported by Ultra Hi. any leads or factory / importer contacts would be greatly appreciated.
|
February 3, 2018, 04:19 PM | #2 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,190
|
They haven't imported those since the 70's. Your best bet would be ebay or matching one up from DGW. Miroku put out some fine guns and they put out some junk depending on what the customer wanted. Ultra Hi isn't associated with high quality.
|
February 4, 2018, 10:15 AM | #3 |
Member
Join Date: November 25, 2012
Posts: 83
|
my ULTRA HI flint lock is a crude made smooth bore that is stamped MADE IN KOREA, why is that in stead of JAPAN ???
|
February 4, 2018, 10:26 AM | #4 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,841
|
Contact Dixie Gun Works.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
February 4, 2018, 10:30 AM | #5 |
Senior Member
Join Date: October 18, 2005
Posts: 275
|
Ultra Hi was an importer, so they may have gotten guns from various countries, not just Japan.
|
February 4, 2018, 11:10 AM | #6 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,841
|
BTW, all comes to worse, it can be hand made from a blank piece of 4140. Cut the hole first and file it square to fit the tumbler. All other measurements/dimensions are taken from that hole.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
February 4, 2018, 05:05 PM | #7 |
Senior Member
Join Date: February 24, 2013
Posts: 584
|
Dixie has hammer "blanks" they take some work to fit but if you have the one your replacing it helps to get the square hole located right.
|
February 6, 2018, 09:02 AM | #8 |
Member
Join Date: November 25, 2012
Posts: 83
|
l.cutler, thanks for the info. seams every time a question comes up about them it is always MADE IN JAPAN, now i know the rest of the story.
|
February 6, 2018, 10:05 AM | #9 | |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,190
|
Quote:
|
|
February 6, 2018, 11:05 AM | #10 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,841
|
2 piece welded together barrel? Holy cow! That's a wall hanger.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
February 17, 2018, 08:42 PM | #11 |
Senior Member
Join Date: May 17, 2007
Location: Vancouver, WA
Posts: 366
|
I remember in the 60's looking at some cheap muzzle loading rifles from India at an import store for around $10-15.00. They were very crude and weighed next to nothing. Would hate to think what would happen if someone actually loaded and fired one.
__________________
357 Taurus Gaucho, 22 Heritage RR, 2-Pietta 1858 44 NMA Remingtons, Pietta, Euroarms & ASM 36 1851 Navies, 31 Uberti 1849, 12 ga H&R Topper, 16 Ga Western Field, 43 Spanish Remington Rolling Block, 44 ASM Colt Walker, High Point C9 9mm, Winchester 1906 22, Rossi 62 22 rifle, Uberti 1860, H&A & IJ 32 S&W BreakTop, 36 Euroarms 1858, 32 H&R 04, 22mag NAA SS BP revolver, .44 Rodgers & Spencer, IJ 38 S&W BreakTop, IJ 22 Sealed 8 |
February 19, 2018, 07:35 PM | #12 |
Senior Member
Join Date: February 20, 2005
Location: Minnesota
Posts: 2,084
|
Mine was a kit gun and the only thing i didn't like about it was the 2 piece stock.
It has a cheap brass cover over the seam. And mine didn't spark either, i had to harden the frizzen! I have always loved shooting it. Its a .44cal and i use a .437 lee RB mold. My 1st project was to remove the made i Japan from the barrel. I used a birchwood casey Plumb Brown kit to finish the barrel but i did it many times because of the porocity's in the metal and they would really show up with that beautiful brown finish. The picture is 10 years old of one of my Grandson's practicing before deer season as this was the gun he wanted to use. at least 3 day a week for the month before season he would be ready to go shoot this rifle. He didn't get an opportunity and his mother let him use her 788 in 30-30Win the next few years and he brought home the meat several times.
__________________
Gbro CGVS For the message of the Cross is foolishness to those who are perishing, But to us who are being saved, It Is The Power Of God. 1Corinthians 1-18 |
February 19, 2018, 08:13 PM | #13 |
Senior Member
Join Date: February 20, 2005
Location: Minnesota
Posts: 2,084
|
Another day different location.
Text with the picture: Logan Takes Aim The Ram is 12" at 100 yards. The 1st load was 30 gr. FFFg under a .437 PRB The ball hit the ground 10 yards in front of the Ram. The charge was increased to 40 gr. FFFg and the Ram went down. Cousin Josh knocks over 3 pigs on the same rail. He would have liked to knocked over a turkey, but its OK. He said I brought home the bacon today!
__________________
Gbro CGVS For the message of the Cross is foolishness to those who are perishing, But to us who are being saved, It Is The Power Of God. 1Corinthians 1-18 |
February 19, 2018, 08:26 PM | #14 |
Senior Member
Join Date: February 20, 2005
Location: Minnesota
Posts: 2,084
|
Another picture i have of this rifle when i Dry Balled it.
And then i stripped the ball with the little Jag and then twisted the rod tip off with a larger jag. I made up a drill bit with a guide to pilot the ball for a larger jag screw and that never failed me. The 1st setup with needle tip and grease gun didn't work. and the small compressor wouldn't move the ball. Plan B was done at the fire hall using the SCUBA tank fill hose. The needle grease tip was attached to the hose capable of 3,000 psi, but the regulator was set down to 1,800 psi. The ram rod was resting against obstruction to visualize any movement. Pressure was applied by throttling the air flow with valve. No movement until valve was opened fully as the connection was poor, leaking air around needle fitting. When the obstruction moved it was a rapid movement with ramrod and ball exiting barrel and were caught in the trap set up 4' from muzzle. Cowabunga! This is the ball, ball jag and rod tip after it was pneumatically removed from barrel. The small ball jag was what I initially tried to pull this ball with. It stripped out.
__________________
Gbro CGVS For the message of the Cross is foolishness to those who are perishing, But to us who are being saved, It Is The Power Of God. 1Corinthians 1-18 Last edited by Gbro; February 19, 2018 at 08:36 PM. |
|
|