The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old August 26, 2009, 03:25 PM   #1776
fortkevin2
Senior Member
 
Join Date: February 12, 2008
Location: NC
Posts: 318
thanks!
fortkevin2 is offline  
Old August 26, 2009, 06:46 PM   #1777
stigp6
Junior Member
 
Join Date: August 25, 2009
Posts: 4
Thanks FlyFish.

Can you estimate what year this model came out based from pics below by looking at the markings? I don't have the unit and I'm still asking the seller for the SN details.




thanks

Last edited by stigp6; August 27, 2009 at 05:53 AM.
stigp6 is offline  
Old August 26, 2009, 07:16 PM   #1778
10s&Xs
Member
 
Join Date: February 15, 2006
Location: Northern Illinois
Posts: 73
K38

Just picked up a K38 in very nice condition. Wondering if I could get a date on it and find out how to tell if it's a combat or target masterpiece.

There's no model number on the front of the frame, just a five digit number that matches the one on the crane.
Serial number is K399XX.
6" barrel with a grooved top.
Adjustable sights.
Serrated trigger.

Thanks in advance!
10s&Xs is offline  
Old August 26, 2009, 09:28 PM   #1779
tyusclan
Member
 
Join Date: August 17, 2009
Location: Florida
Posts: 45
1948.

Normally K prefixes are target frames.

S&W began assigning model numbers in 1957.
tyusclan is offline  
Old August 26, 2009, 09:42 PM   #1780
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
stigp6: The lack of an upper sideplate screw (next to the rear sight) immediately identifies the gun as newer than 1955. The lack of an S&W logo on the sideplate means it has to be newer than 1981, and the unpinned barrel (a bit difficult to see in your photos, but I think there's no pin) means it's newer than 1982. The square butt (which this appears to be) and the tapered barrel were dropped in 1995-96, so the gun appears to be between 1982 and 1995/96. That's the best I can do for you from the photos.
FlyFish is offline  
Old August 26, 2009, 10:42 PM   #1781
10s&Xs
Member
 
Join Date: February 15, 2006
Location: Northern Illinois
Posts: 73
tyusclan: 1948? Very cool. I was looking for something that would be good for NRA Distinguished revolver. but I didn't expect to find something that old in such good condition for what I paid. Hope it shoots as good as it looks.

thanks much.
10s&Xs is offline  
Old August 27, 2009, 05:26 AM   #1782
tyusclan
Member
 
Join Date: August 17, 2009
Location: Florida
Posts: 45
If it's that nice a revolver it would probably be worth the $35 to request a letter from Roy Jinks. His letter will document a lot of information for your gun, including giving you the exact date of shipment and who it was originally shipped to.

You can go to S&W's website for the info and address to request the letter. I don't have it handy right now or I'd post it.
tyusclan is offline  
Old August 27, 2009, 05:48 AM   #1783
stigp6
Junior Member
 
Join Date: August 25, 2009
Posts: 4
FlyFish,
Just got the serial number of the pics I just posted - AYR583x

Also edited my post above and included pic of other side. Sorry for the duplicate pic.
What do you think? thanks


Last edited by stigp6; August 27, 2009 at 05:59 AM.
stigp6 is offline  
Old August 27, 2009, 07:35 AM   #1784
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
stigp6: Between July & December 1987.
Radagast is offline  
Old August 27, 2009, 07:48 AM   #1785
stigp6
Junior Member
 
Join Date: August 25, 2009
Posts: 4
thanks Radagast
stigp6 is offline  
Old August 27, 2009, 07:53 AM   #1786
10s&Xs
Member
 
Join Date: February 15, 2006
Location: Northern Illinois
Posts: 73
tyusclan: I'll check into that. There was no box or papers, and the grips aren't original, so I don't think I'm looking at something highly collectible, but it'd be cool to know some history about it.

Thanks.
10s&Xs is offline  
Old August 27, 2009, 07:58 AM   #1787
Dieselgrin
Junior Member
 
Join Date: August 27, 2009
Posts: 7
Model 10-8

Just picked up a cherry 10-8, but don't know how to determine YOM. SN is AYS46XX. Can anyone help me out?
Dieselgrin is offline  
Old August 27, 2009, 08:12 AM   #1788
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
Dieselgrin: first half of 1988.
FlyFish is offline  
Old August 27, 2009, 10:59 AM   #1789
rnr
Member
 
Join Date: March 2, 2006
Location: Denver Area
Posts: 61
Hey Flyfish.

My K22 is a M17-4 made in 80, (78-Kxxxx) I think??? That's around the time I bought it.
So what revisions made it a -4?
And can this be classified as a combat masterpiece? Adjustable rear sights, fat trigger, and oversized grips.... The hammer is the transfer bar type.

Any info you can tell me is much appreciated.

Last edited by rnr; August 27, 2009 at 11:14 AM.
rnr is offline  
Old August 27, 2009, 11:46 AM   #1790
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
rnr - S/N starting with 78K would be correct for 1980. There was one change with the -4: the gas ring (thickened area to protect the cylinder/ejector rod mechanism from gasses excaping the cylinder/barrel gap) was moved from the yoke to the cylinder. Model 17s were simply called the K-22 Masterpiece prior to numbering - the K-22 Combat Masterpiece, basically the same gun with a 4" barrel (only) and a ramped front sight, was designated the Model 18.
FlyFish is offline  
Old August 27, 2009, 04:05 PM   #1791
rnr
Member
 
Join Date: March 2, 2006
Location: Denver Area
Posts: 61
Thanks for the info, Mr. Fish
I'd always heard them called the combat masterpiece, so that's what I thought. Mine's a 6" and it's had lots of rounds put thru it, tho you wouldn't know it to look at it. She rides in a suede lined Safariland holster and shoots like a dream. Such a nice trigger!!!

Anyway, thanks.
You must like SW's to do this for everyone. I know I appreaciate the info. It does take a while to read thru so many pages tho.
rnr is offline  
Old August 27, 2009, 04:36 PM   #1792
shadow53
Junior Member
 
Join Date: December 10, 2008
Location: South Florida
Posts: 14
Looking for info on a Mod 36-1 ser#AAM47xx

I bought it second hand about 25 years ago

Thanks!!
shadow53 is offline  
Old August 27, 2009, 04:58 PM   #1793
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
Shadow53: Appears to be late 1982 - October was AAF prefix and December was ABL. Just curious - does it have a pinned barrel? It's either one of the last ones with, or one of the first ones without.

rnr: I have the book and a bit of spare time, so I'm happy to help out, even though my knowledge pales in comparison to several real S&W experts here. And, yes, I do confess to having a bit of a love affair with S&W revolvers. I have a 17 from 1971, and I agree they are sweet guns - definitely a "must have" for any S&W collection.
FlyFish is offline  
Old August 27, 2009, 05:03 PM   #1794
shadow53
Junior Member
 
Join Date: December 10, 2008
Location: South Florida
Posts: 14
FlyFish: Thanks for the info. I am still really a novice, although I have heard the term "pinned barrel" not really sure what it is? What do I look for?
shadow53 is offline  
Old August 27, 2009, 06:55 PM   #1795
shadow53
Junior Member
 
Join Date: December 10, 2008
Location: South Florida
Posts: 14
After some Googling for images, I figured out it is NOT pinned. It is a 3" square butt, they seem to be less common than the round butt.
shadow53 is offline  
Old August 27, 2009, 07:56 PM   #1796
Dieselgrin
Junior Member
 
Join Date: August 27, 2009
Posts: 7
Thanks Flyfish. Where can I find a list of serials?
Dieselgrin is offline  
Old August 27, 2009, 08:19 PM   #1797
tyusclan
Member
 
Join Date: August 17, 2009
Location: Florida
Posts: 45
The info is found in the Standard Catalog of Smith & Wesson by Jim Supica and Richard Nahas. It's available at Amazon.com or most any bookstore.
tyusclan is offline  
Old August 27, 2009, 09:35 PM   #1798
Thenarwhal
Junior Member
 
Join Date: August 27, 2009
Posts: 3
How about ...

Model 25-2, N378xxx
Model 57, N669xxx
Model 17-3, 5K102xx
Bekeart 458xxx

Anyone have any info ... ? Thanks.
Thenarwhal is offline  
Old August 27, 2009, 10:12 PM   #1799
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Model 25-2, N378xxx
Model 57, N669xxx
Model 17-3, 5K102xx
Bekeart 458xxx
Model 25-2, N378xxx = 1975/76
Model 57, N669xxx = 1979/80
Model 17-3, 5K102xx = 1973
Bekeart 458xxx = Serial numbers ran from 160000 in 1911 to 536684 in 1941. SN 525600 was in 1935 so yours is prior to that.

Jim
laytonj1 is offline  
Old August 27, 2009, 11:57 PM   #1800
Thenarwhal
Junior Member
 
Join Date: August 27, 2009
Posts: 3
Thanks.
Thenarwhal is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:42 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.56865 seconds with 9 queries