The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools Search this Thread
Old April 6, 2019, 10:25 AM   #1
arcticap
Senior Member
 
Join Date: March 15, 2005
Location: Central Connecticut
Posts: 3,105
Video - A Burst 1861 Navy Revolver Barrel

A short 2:28 video by capandball showing how an obstruction due to a dry ball or squib load caused a revolver barrel to burst.

https://youtu.be/PU4-v433Of0

Last edited by arcticap; April 6, 2019 at 10:33 AM.
arcticap is offline  
Old April 6, 2019, 11:49 AM   #2
Pahoo
Senior Member
 
Join Date: February 16, 2006
Location: IOWA
Posts: 7,693
Interesting

arcticap
That was interesting and a great example of what can happen when basic safety rules are not followed. I once saw a "SideLock" M/L rifle that a barrel ring about 12" from the muzzle. Can only venture a guess as to how that happened...

Thanks again and;
Be Safe !!!
__________________
'Fundamental truths' are easy to recognize because they are verified daily through simple observation and thus, require no testing.
Pahoo is offline  
Old April 6, 2019, 04:34 PM   #3
bedbugbilly
Senior Member
 
Join Date: November 19, 2009
Posts: 3,157
even with bp - squibs can occur
__________________
If a pair of '51 Navies were good enough for Billy Hickok, then a single Navy on my right hip is good enough for me . . . besides . . . I'm probably only half as good as he was anyways. Hiram's Rangers Badge #63
bedbugbilly is offline  
Old April 6, 2019, 05:56 PM   #4
arcticap
Senior Member
 
Join Date: March 15, 2005
Location: Central Connecticut
Posts: 3,105
Someone on THR who has the same 1861 model also reported a slight bulge about 1 inch into his barrel from the same type of squib event.
His barrel didn't burst and he said that its accuracy is acceptable.
But maybe it's a more common occurrence than I realized.
I'm glad that I load off the frame and can see that the chambers are loaded with powder before ramming.

Last edited by arcticap; April 7, 2019 at 01:07 PM.
arcticap is offline  
Old April 7, 2019, 12:41 AM   #5
Hellgate
Senior Member
 
Join Date: November 18, 2010
Location: Orygun
Posts: 804
I had a similar event happen to me with an Uberti Remington NMA. I heard just the report of the cap and figured I have either capped the open chamber or forgot to put powder into the chamber. A little voice inside said
"check the bore before touching off the next round". So I did and found a ball about 3-4" into the bore. My flask had run out of powder and dribbled just a few remaining grains of powder into the chamber but they were enough to propel the ball past the forcing cone but not out the barrel. A completely dry chamber usually results in nothing but a cap pop. If the ball is not a tight fit maybe the ball will lodge in the forcing cone. The cap alone doesn't have the umph to move the ball much id at all. I'd bet the customer ran out of powder like me.
__________________
With over 15 perCUSSIN' revolvers, I've been called the Imelda Marcos of cap & ball.
SASS#3302 (Life), SASS Regulator, NRA (Life), DGB#129
Wolverton Mtn. Peacekeepers (WA), former Orygun Cowboy (Ranger, Posse from Hell)
Hellgate is offline  
Old April 8, 2019, 01:02 PM   #6
John E.B. Rawton
Member
 
Join Date: September 22, 2018
Posts: 68
I went out for my first c&b experience over the weekend. Shot 30 rounds through each gun getting the feel for it. I had one shot that sounded a bit odd and a few extra sparks where they weren’t before. I immediately sent a rod down down the barrel. It was clear so I kept a shootin’
John E.B. Rawton is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:27 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06912 seconds with 10 queries