The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Semi-automatics

Reply
 
Thread Tools Search this Thread
Old March 19, 2019, 12:53 PM   #26
rebs
Senior Member
 
Join Date: January 10, 2012
Posts: 3,823
on a friends muzzle loader target rifle the first shot went off before I had the sights lined up then he told me don't try to put your finger on the trigger just touch the side of the trigger. That was light for sure.
rebs is offline  
Old March 19, 2019, 01:32 PM   #27
stagpanther
Senior Member
 
Join Date: March 2, 2014
Posts: 6,086
This thread inspired me to backoff the accutrigger on my new savage 110 338 Lapua rifle--digging into my box it came in I discovered the adjustment dohicky did not come with it (drat) but managed to get it down around two pounds which is fine by me for a rifle that I spend half my time shooting in winter conditions. Couple of minor "irritations"--the adjustment cannot be made with just the trigger guard off--the adjustment screw is blocked by the bracket the screw hole the rear trigger guard screw goes through--so I had to remove the stock altogether in order to get at the adjustment screw.
__________________
If you’re ever hiking in the woods and you get lost, just look up and find the brightest star in the sky and you’ll know which way space is.
I am NOT an expert--I do not have any formal experience or certification in firearms use or testing; use any information I post at your own risk!
stagpanther is online now  
Old March 19, 2019, 02:12 PM   #28
MarkCO
Senior Member
 
Join Date: October 21, 1998
Location: Colorado, USA
Posts: 2,686
3 ounces is the lightest I have ever pulled. Unless you count a release trigger, then -2 pounds.
__________________
Good Shooting, MarkCO
www.CarbonArms.us
MarkCO is offline  
Old March 20, 2019, 11:15 PM   #29
bbqncigars
Senior Member
 
Join Date: February 1, 2009
Location: Iowa
Posts: 458
Less than six ounces on the Jewell on my fifty, before I decided that 1 1/2 lbs was more appropriate. I don't know what the set trigger on the Sharps is, but it's not suitable for gloves.
__________________
"Of all the things I've lost, I miss my mind the most." A. Brilliant
bbqncigars is offline  
Old March 21, 2019, 08:52 AM   #30
Erno86
Senior Member
 
Join Date: September 22, 2012
Location: Marriottsville, Maryland
Posts: 1,557
My 1943 "IZZY" M91/30 'true' PU sniper...that I bought 'used' from a gunsmith shop & store. You'd look at it and it would go off.

I never measured the trigger pull, though I had to replace the trigger leaf spring and trigger; after it had failed my perpendicular 1 foot drop test on a carpeted floor.

The Russian commissar, that did drop tests with live ammo on M1891's in a New England Westinghouse gun factory here in the U.S. --- in 1915; was tricked by factory workers, when they purposely made the trigger pull so light that the M1891 would fail on his drop test --- And it did go off...putting a hole in the factory roof.
__________________
That rifle hanging on the wall of the working class flat or labourer's cottage is the symbol of democracy. It is our job to see that it stays there."

--- George Orwell

Last edited by Erno86; March 21, 2019 at 09:44 AM.
Erno86 is offline  
Old April 2, 2019, 01:01 PM   #31
Bulwyf
Member
 
Join Date: January 23, 2019
Posts: 22
Colt 22 LR peacemaker, stag grips.

After cocking the hammer. A sharp exhale/blow of air would make the hammer fall.
Bulwyf is offline  
Old April 6, 2019, 05:36 PM   #32
SageRatSafaris
Junior Member
 
Join Date: April 5, 2019
Posts: 5
Buddy has 6oz on long range target rifle, and I really don't like it. I want to be able to put my finger on the trigger without it instantly going bang. Not being able to touch the trigger while waiting for respiratory pause makes trigger press and follow through less smooth for me.
SageRatSafaris is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:27 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05584 seconds with 10 queries