|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
December 31, 2016, 07:04 PM | #1 |
Senior Member
Join Date: April 3, 2015
Location: North Georgia
Posts: 1,372
|
Unique with Hornady 250 xtp in 45 colt
I've got 4 manuals and have been on line and can't find a recipe for unique in my Rossi 45 colt using the 250 xtp. I've loaded 260 and 290 cast with it but don't want to mess up on these. I can use Titegroup or HP 38 if nothing listed for unique. Hoping someone has manual or more info than I can find.
__________________
God is NOT dead!!!! |
December 31, 2016, 07:50 PM | #2 |
Senior Member
Join Date: April 13, 2007
Posts: 770
|
From hornady 9th
45 colt revolver Test used 7 1/2" barrel blackhawk win lp primer hornady case COL 1.595 250 xtp, unique Charge wt (velocity) 6.2(600) 6.5 (650) 6.8(700) 7.1 (750) max 7.4 (800) Thompson center or ruger blackhawk data section availible. 250 xtp listed but powders are vv 105, aa #9, alliant 2400, aa 5744, imr 4227. They are velocities in 1150-1350 ranges. Last edited by surveyor; December 31, 2016 at 07:55 PM. |
December 31, 2016, 08:02 PM | #3 |
Senior Member
Join Date: April 3, 2015
Location: North Georgia
Posts: 1,372
|
I didn't look at Ruger only loads. I don't know if Roosi m92 can handle them or not.
__________________
God is NOT dead!!!! |
December 31, 2016, 08:15 PM | #4 |
Senior Member
Join Date: April 13, 2007
Posts: 770
|
Lee 2nd
250 xtp/unique 6.9(749) max 7.8 (840) Lyman 49 250 xtp/unique 1.590 oal Win cases, win lp primers 7.8 (755) max 8.7 (877) Lee and lyman don't list what test was. I didn't give any data from ruger only, freedom arms, etc. It is quite warm. I don't load 45 colt, so I can't help much. Last edited by surveyor; December 31, 2016 at 08:22 PM. |
December 31, 2016, 09:46 PM | #5 |
Senior Member
Join Date: April 3, 2015
Location: North Georgia
Posts: 1,372
|
I did find it in Hornady 9th. 7.3 was max. I'm still curious if I can load the Rossi hotter since it's a rifle. For now better safe than sorry.
__________________
God is NOT dead!!!! |
December 31, 2016, 09:56 PM | #6 |
Senior Member
Join Date: April 13, 2007
Posts: 770
|
Rifle data on pg 640
Test was a rossi 92 src 20" barrel. |
December 31, 2016, 10:11 PM | #7 |
Senior Member
Join Date: April 3, 2015
Location: North Georgia
Posts: 1,372
|
Thanks Surveyor
__________________
God is NOT dead!!!! |
December 31, 2016, 10:56 PM | #8 |
Senior Member
Join Date: November 6, 2001
Posts: 1,125
|
LYMAN 50th Manual.
45 Colt pistol----Win case----Win LP primer---250 gr. XTP---oal 1.590" Unique powder---start 7.8---755 fps---maximum 8.7--877 fps tested in universal receiver and Ruger Blackhawk 7 1/2" barrel Just for comparison as this data is above Hornady's |
January 4, 2017, 07:30 AM | #9 |
Senior Member
Join Date: February 7, 2012
Posts: 299
|
Your Rossi '92 will most assuredly handle heavy "Ruger only" loads.
If your Rossi will feed it, you may find the RCBS 270-SAA to be a very accurate bullet. Last edited by 1100 tac; January 4, 2017 at 07:59 AM. |
January 4, 2017, 06:47 PM | #10 |
Senior Member
Join Date: April 3, 2015
Location: North Georgia
Posts: 1,372
|
I've got a friend on here that cast some 290 grain swc. Lyman mold I think. It really likes them. I'm just saving them for hunting. I had a box of the xtp I bought when I first got vaquero.
__________________
God is NOT dead!!!! |
|
|