July 21, 2006, 12:44 PM | #1 |
Senior Member
Join Date: June 17, 2006
Posts: 355
|
22 ppc
should I go ahead and turn the outside necks of my 22 ppc cases?
they are brand new sako brass.and another question whats a good load to start with? I have varget,h322 plenty of 40gr,55gr match bullets and federal match primers.the gun is a thompson encore 22 ppc stainless bull barrel from there custom shop 1 in 12 twist. /// |
July 21, 2006, 01:17 PM | #2 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Mike the necks to see if they are consistent and no more than .014", preferably around .012" for consistent bullet pull and clean release. If the necks are incosistent in thickness, turn them to reduce the variation. Norma brass is generally very good, so I doubt you will have problems.
Once you have fired the cases, check how much the neck expands. If the neck expands very little, you might want to turn them to allow easier pullet release.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
Thread Tools | Search this Thread |
|
|