December 5, 2012, 10:47 AM | #1 |
Senior Member
Join Date: October 14, 2011
Posts: 627
|
G21 10mm 22# spring
I put a 22# Wolff spring and rod in my G21 10mm conversion project and encountered FTE's about 1 in 10 (stovepipes) with BVAC 180gr, 100 rounds. All else is stock. I don't mind a break-in period but now I'm thinking 20# would be more appropriate. Thanks for opinions.
|
December 5, 2012, 01:45 PM | #2 |
Senior Member
Join Date: August 28, 2008
Location: Near Fairbanks Alaska
Posts: 829
|
I don't have your answer. Here is a link to the 21 to 20
conversion part of a dedicated 10mm forum. There will be more info over on the Glocktalk forum, also. http://www.ar15armory.com/forums/Glo...oc-t44970.html |
December 5, 2012, 04:07 PM | #3 |
Senior Member
Join Date: December 11, 2005
Location: SW Ohio
Posts: 808
|
A 22lb spring is overkill and will beat a slidelock into early submission.
|
December 5, 2012, 04:29 PM | #4 |
Junior member
Join Date: October 3, 2012
Location: Central Texas
Posts: 1,046
|
what was wrong with the factory spring?
|
December 5, 2012, 06:10 PM | #5 | ||
Senior Member
Join Date: May 15, 2008
Location: the object towards which the action of the sea is directed
Posts: 2,123
|
Quote:
Quote:
__________________
The lowest paid college major/degree in this country after graduation... Elementary Education. Now, go figure... |
||
December 5, 2012, 06:39 PM | #6 |
Senior Member
Join Date: May 13, 2011
Location: Carolina
Posts: 3,415
|
I use a 20 lb spring in mine---works great
__________________
Mrgunsngear Youtube Channel |
December 5, 2012, 07:05 PM | #7 |
Senior Member
Join Date: October 14, 2011
Posts: 627
|
^^ What AZAK said. The factory spring does work, I just don't want to catch a face-fulla-slide some day.
Thanks plouffe and all, lookin forward to my 20#. [Edit] 10mm4ever: Yeah, it was abusing the slide lock also. I've gotten into the habit of pulling the slide to reload a new mag, but still.... Last edited by AndyWest; December 5, 2012 at 07:17 PM. |
December 5, 2012, 07:16 PM | #8 |
Senior Member
Join Date: February 19, 2012
Location: A wheat field in Kansas
Posts: 141
|
I run a #22 spring in my g20 with hot loads down to sub sonics and have no problems. The 20 came before the 21 and had a heavier slide, when glock built the 21 on the 20 frame they had to lighten the slide to get the weaker 45acp to function. I would stick with the heavier spring to keep the barrel locked up longer and look at your extractor instead.
Just my 2¢…
__________________
"A free people ought not only to be armed and disciplined but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government." --George Washington |
Thread Tools | Search this Thread |
|
|