November 10, 2018, 03:57 PM | #1 |
Senior Member
Join Date: April 5, 2015
Posts: 171
|
Bullet seating Depth
I have a Rem 700 with a Lilja barrel 26" long and 1 1/8 in diameter with a Jewel trigger and a Tasco scope that goes to 32x in 22-250. I consistantly shoot in the 4's or less. I measure ogive to base on each round and keep them within .003 length. Would getting them less than .003 help me? I only shoot at 100 yds.
|
November 10, 2018, 04:19 PM | #2 |
Staff
Join Date: March 4, 2005
Location: Ohio
Posts: 21,061
|
I doubt it. Certainly not as much as figuring out if you are at the optimum bullet jump for your gun or not. Read this article to get something to play with before agonizing over jump precision.
__________________
Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle |
November 11, 2018, 10:37 AM | #3 |
Senior Member
Join Date: April 28, 2013
Posts: 3,173
|
Agonizing for sure, you hit the nail square on the head there UN.
|
November 13, 2018, 11:24 AM | #4 |
Senior Member
Join Date: June 11, 2007
Posts: 2,155
|
__________________
Semper Fi Vietnam 1965 VFW Life member NRA Life Member |
|
|