The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old October 19, 2018, 08:03 AM   #26
jmorris
Senior Member
 
Join Date: November 22, 2006
Posts: 2,958
This is the best method, I was talking about in #3, that I use.

https://www.youtube.com/watch?v=La83ZVKnBzw

100 cases swaged in under 3 min, with the side benefit of also loading 100 rounds at the same time.

No matter how slow you operate the machine you still cut the work in half because you are performing steps concurrently vs, consecutively.
jmorris is offline  
Old October 19, 2018, 10:56 AM   #27
mikld
Senior Member
 
Join Date: February 7, 2009
Location: Southern Oregon!
Posts: 2,658
FWIW; have "de-crimped" about 900 HXP cases for my Garand (30-06 Greek surplus military ammo). Each one had 3 small stakes around the primer pocket. I normally use clean and not necessarily super sharp countersinks (often a carbide tool) and I've done them all just like NATO/LC brass and no problems/grabbing...

For me, removing primer crimps isn't part of a reloading session. Mainly it's "busy work". Since I have waaaay more time to reload than to shoot, I'll do some things around my shop to keep me busy "reloading", like processing brass; tumbling and sorting brass and removing primer crimps, so I have never been in a hurry and counting seconds or rounds per hour. I pick up a case, touch it to a countersink/chamfer tool and drop it in a container; 1 second?
__________________
My Anchor is holding fast!
I've learned how to stand on my own two knees...

Last edited by mikld; October 19, 2018 at 11:04 AM.
mikld is online now  
Old October 19, 2018, 04:41 PM   #28
hdwhit
Senior Member
 
Join Date: June 22, 2017
Posts: 941
I've tried all manner of tools, but always gravitate back to a countersink as described by mikld in Post #10.
hdwhit is offline  
Old October 20, 2018, 09:47 AM   #29
arlaunch
Junior Member
 
Join Date: May 11, 2017
Posts: 4
I use the RCBS bench mounted swage tool. The more i use it the more i like it. I bought it back in 2014 or so.

The handle is comfortable. Once can remove about 11-13 crimps a minute when in the routine.

It seems expensive at first. Years later though... Not so much.
arlaunch is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:51 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05932 seconds with 9 queries