The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools Search this Thread
Old April 30, 2017, 09:31 AM   #1
jonnefudge
Member
 
Join Date: November 20, 2016
Posts: 23
Remington 1100 steel shots?

Hi!
I have an old Remington 1100 12g, 2-3/4 and I wonder if it is safe to steel shots through its barrel? I am thinking about cutting the barrel down to 19" so there will be no choke.

It is ok for me if the barrel wear out in the long term due to the steel shots. It is not ok if it blows up.

/fudge

Last edited by jonnefudge; April 30, 2017 at 03:07 PM.
jonnefudge is offline  
Old April 30, 2017, 09:36 AM   #2
ammo.crafter
Senior Member
 
Join Date: June 25, 2006
Location: The Keystone State
Posts: 1,192
1100 Remy

What is the purpose of this shotgun?
__________________
"The Constitution is not an instrument for government to restrain the people, it is an instrument for the people to restrain the government, lest it come to dominate our lives and interests."
Patrick Henry, American Patriot
ammo.crafter is offline  
Old April 30, 2017, 09:59 AM   #3
jonnefudge
Member
 
Join Date: November 20, 2016
Posts: 23
Just training some casual shooting on the range, rabbit hunting and maybe some skeet just for fun. I might install a choke later if more range is needed.
jonnefudge is offline  
Old April 30, 2017, 07:38 PM   #4
Rob228
Senior Member
 
Join Date: May 29, 2010
Location: Broomfield CO
Posts: 740
If you aren't hunting waterfowl you really wouldn't be shooting any steel through it.
Rob228 is offline  
Old April 30, 2017, 08:43 PM   #5
jmr40
Senior Member
 
Join Date: June 15, 2008
Location: Georgia
Posts: 8,260
The shotgun will probably be fine with steel shot. Almost all shotguns made since the late 80's are designed for it and most repeaters made prior to that work fine. The only issues were guns with thin barrel steel. Mostly SXS and O/U shotguns.

But a gas operated semi-auto needs pressure to build up in the barrel in order to cycle. Cutting the barrel down shorter will dramatically change that pressure and it most likely won't feed and eject after you do. It might work with heavy magnum loads, might not. But you can probably forget about normal field loads working in it.

Cutting barrels down is best done to pumps.
__________________
"If you're still doing things the same way you were doing them 10 years ago, you're doing it wrong"

Winston Churchill
jmr40 is offline  
Old May 1, 2017, 08:50 AM   #6
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 19,061
Cutting down the barrel to 19" & using it for skeet? I think if you want self defense, you should buy yourself a short barrel. Different barrels are for different purposes.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Old May 1, 2017, 10:17 AM   #7
KEYBEAR
Senior Member
 
Join Date: January 11, 2012
Location: Indiana
Posts: 762
What choke is the barrel now . If full choke steel should not be used .
Do you know what size the choke is . A lot of older Remington 1100 were very tight you need to know .
KEYBEAR is offline  
Old May 2, 2017, 11:58 AM   #8
5whiskey
Senior Member
 
Join Date: October 23, 2005
Location: US
Posts: 2,171
Quote:
What choke is the barrel now . If full choke steel should not be used .
Do you know what size the choke is . A lot of older Remington 1100 were very tight you need to know .
This. You should not shoot steel through a full choke, especially a tight one. As others have said, you have no need to shoot steel unless you hunt waterfowl (and in this case, a short open choke barrel is useless). Further, I highly advise against whacking the barrel on an old 1100. First off, it may not cycle as pointed out by others. Second off, an open choke is good for almost nothing except close quarters SD. Almost no hunting application there. Certainly no application that would require steel shot.

I would get a maverick 88 to mess around with if short (legal) barrels interested you.
5whiskey is offline  
Old May 2, 2017, 03:47 PM   #9
jonnefudge
Member
 
Join Date: November 20, 2016
Posts: 23
Thanks for the input! I might reconsider cutting the barrel.
jonnefudge is offline  
Old May 19, 2017, 10:32 PM   #10
Reader850
Member
 
Join Date: July 6, 2011
Posts: 32
Mine is cut to 18 and works fine

I bought a new Rem 1100 in about 1980, the last one sold at the local Sears as it discontinued guns at this store. Several years later, my brother, an Austin policeman, had the APD armorer cut it to 18" and a fraction, and threaded it for Winchokes (the barrel was too thin at that point for Remchokes is what he said). I've used it on many dove hunts, never had a problem with cycling. The semi-auto action is always very reliable with a wide variety (all I've tried) of shells, target, skeet and field loads; also buckshot. It is very quick to swing/point. I like hunting with it. Never shot steel through it. But I wish I had the long barrel, too. Some day I'll buy one.
Reader850 is offline  
Old May 21, 2017, 01:09 PM   #11
ocharry
Senior Member
 
Join Date: October 20, 2006
Posts: 281
i have a buddy that cut his 1100 barrel down,,,if it caused a cycling problem his gun didnt get the memo,,,and most steel shot loads are a little hotter anyway,,,so i dont think you will have a problem,,,,remington does make short factory barrels for the 1100,,,,if you are going to shoot steel in it i wouldnt want anything tighter than imp cyl

also with steel shot you will pick up a choke,,,cylinder bore will now be improved cylinder,,,,imp cyl will be modified,,,,mod will be full

i have killed a lot of small game with imp cyl

make it like you want it to be,,,there are thousands of 1100 barrels out there

just make sure if you cut it to stay north of 18"......maybe 18.5-19"

just saying

my .02
ocharry
__________________
YHS
ocharry
ocharry is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:08 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2016 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06507 seconds with 9 queries