The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old December 9, 2017, 03:56 PM   #1
RC20
Senior Member
 
Join Date: April 10, 2008
Location: Alaska
Posts: 7,014
Marking Brass With Fingernail Polish

I have been working on color coding my reloading stuff.

My wife suggested Fingernail polish as she has quite a collection that is used for art work

I though it might work for marking cases, so I tried it on a run that was getting polished.

I marked the backs, primer pocket and just ahead of the rim in the recess.

It does hold up nicely under tumbling, I would guess not under wet cleaning and the pins.

That said I expect the back to work off, but just forward of the rim seems to hold promise.

It looks like after Xmas before I get to try a run of reloaded ones.
__________________
Science and Facts are True whether you believe it or not
RC20 is offline  
Old December 10, 2017, 09:46 AM   #2
jpx2rk
Senior Member
 
Join Date: December 29, 2015
Posts: 387
Is the color coding for easy caliber identification, or times fired, or ??
jpx2rk is offline  
Old December 10, 2017, 09:52 AM   #3
444
Senior Member
 
Join Date: November 20, 2000
Location: Ohio
Posts: 3,968
You can do that, but I just write on the cartridge case with a Sharpie.
__________________
You know the rest. In the books you have read
How the British Regulars fired and fled,
How the farmers gave them ball for ball,
From behind each fence and farmyard wall,
Chasing the redcoats down the lane,
Then crossing the fields to emerge again
Under the trees at the turn of the road,
And only pausing to fire and load.
444 is offline  
Old December 10, 2017, 11:30 AM   #4
RC20
Senior Member
 
Join Date: April 10, 2008
Location: Alaska
Posts: 7,014
Quote:
Is the color coding for easy caliber identification, or times fired, or ??
In this case (pun) its playing with ID for a couple of reason.

If I introduce a new batch of identical mfg, I want to be able to segment them out so I know what era they are from.

I may use it to ID that all cases in a batch have been annealed.

Dies I am working on color coincide gfor quick ID. I swap them aroudn a lot and its easier to have them in a pan.

Thuen the bullet OGVIE adapro and the case shoulder adpaor are ncie to color code.

Shell holders as well.



444: My problem with the sharpies is I marked case ends and the tumbling wore it right off.

The nail polish has stuck so far, I will see what firing does in regards to machine off the polish or if it stays on and how many tumbling's it lasts. .

Under the rim may work out better for not getting removed .

Tumbling did not remove the polish at least on this round.
__________________
Science and Facts are True whether you believe it or not
RC20 is offline  
Old December 10, 2017, 12:35 PM   #5
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 21,024
I think marking the extractor groove is your best bet for lasting, unmolested. I used to mark .45 Auto brass on the head with Magic Markers to ID it for recovery at matches. There, you can't count on the other shooters to look in the groove while policing their brass. However, while that marking held up to firing well enough for one event, it not only tumbled off, but left a good bit on the breech face of the gun that had to be removed with solvent later. You may find the same thing.

I had good luck marking brass with a small automatic center punch with the handle unscrewed until the indentation it made was very light. I added a punch mark at every reloading.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member and Golden Eagle
Unclenick is offline  
Old December 10, 2017, 12:55 PM   #6
RC20
Senior Member
 
Join Date: April 10, 2008
Location: Alaska
Posts: 7,014
Another good thought.

I had thought of a vibrator maker but that is not very good control.

Have to see if I have a center punch these days!
__________________
Science and Facts are True whether you believe it or not
RC20 is offline  
Old December 10, 2017, 01:04 PM   #7
Don Fischer
Senior Member
 
Join Date: March 2, 2017
Posts: 1,868
I have a Mossberg Patriot in 243 and a Mod 700 in 243. The 700 get's fingernail polish over the primer. Nothing around the case neck and for working up loads, a sharpie tells me what charge in in the case!
Don Fischer is offline  
Old December 10, 2017, 02:01 PM   #8
hounddawg
Senior Member
 
Join Date: March 1, 2009
Posts: 4,232
When doing load testing and loading the ammo at home I use Sharpies to color code the primers and base of the case. Red = 22.3 of Varget, Blue = 22.5 of Varget , Green = H4895 or whatever and I do the same thing when testing seating depths. Just makes things easier if for some reason the cases get jumbled together. Enough stays on after shooting so you can still identify the case's load for close inspections back at the shop
__________________
“How do I get to the next level?” Well, you get to the next level by being the first one on the range and the last one to leave.” – Jerry Miculek
hounddawg is offline  
Old December 10, 2017, 08:45 PM   #9
hdwhit
Senior Member
 
Join Date: June 22, 2017
Posts: 1,011
When I dry tumble cases in walnut media, I start the tumbler in the morning when I leave for work and shut it off when I get home again, so the tumbling time is around 8 hours. In general, neither fingernail polish marks nor Sharpie marker markings last long in that environment.

If you need your marks to simply survive from one loading until you segregate the brass after shooting at the start of the next reloading phase, either fingernail polish or Sharpie should work. If you need it to survive permanently, use a Sharpie and limit tumbling time.
hdwhit is offline  
Old December 11, 2017, 03:47 PM   #10
RC20
Senior Member
 
Join Date: April 10, 2008
Location: Alaska
Posts: 7,014
I do the same but often 12 hours.

The nail polish did perfectly fine through that.

What it does when the case fires and pushes against the bolt head is ?
__________________
Science and Facts are True whether you believe it or not
RC20 is offline  
Old December 11, 2017, 08:14 PM   #11
jmr40
Senior Member
 
Join Date: June 15, 2008
Location: Georgia
Posts: 10,792
When working up loads I'll load up 5 each at different powder charges and simply write the powder charge on the cases with a sharpie. Once I settle on a load no the load data goes on the box.

I could be wrong, but nail polish might be thick enough to cause feeding and ejection problems.
__________________
"If you're still doing things the same way you were doing them 10 years ago, you're doing it wrong"

Winston Churchill
jmr40 is offline  
Old December 12, 2017, 07:30 AM   #12
Mobuck
Junior member
 
Join Date: February 2, 2010
Posts: 6,846
Considering the "thickness" of a dab of nail polish, many of my rifles would not chamber the "marked" rounds.
For testing purposes, I write on the cases with a Sharpie. After loading, I only use labels on the storage containers.
Mobuck is offline  
Old December 25, 2017, 02:17 PM   #13
DEMOLITION MAN
Member
 
Join Date: March 19, 2008
Location: Pa.
Posts: 35
I use nail polish for blacking out headstamps of reformed 06 to 270 cases, then of course mark the boxes. Not too much to effect headspace. Been working fine, but they are short.
I know some say use a Dremel or punch mark, but the polish holds up
DEMOLITION MAN is offline  
Old December 25, 2017, 02:20 PM   #14
DEMOLITION MAN
Member
 
Join Date: March 19, 2008
Location: Pa.
Posts: 35
Also good for marking some old WRA 06 cases. I have some that are from 1928!
DEMOLITION MAN is offline  
Old December 25, 2017, 03:47 PM   #15
RC20
Senior Member
 
Join Date: April 10, 2008
Location: Alaska
Posts: 7,014
I will do some measuring. Pretty thin.

I run a tight chamber but not that tight.
__________________
Science and Facts are True whether you believe it or not
RC20 is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:37 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.07489 seconds with 8 queries