May 3, 2012, 08:20 AM | #26 |
Senior Member
Join Date: February 25, 2010
Location: Coyote Creak, SW Texas
Posts: 597
|
Look again at the Cimarron site and go to the Artillery model. BP frame 5 1/2".
They explain the Artillery model came about after the Indian wars when the wore out 7 1/2" model original SAA's were returned to the armories, barrels shortened, and worn parts replaced. The Rough Riders (Teddy Roosevelt) used the Artillery model in their charge up San Juan Hill. Mine is the Artillery model and I find this barrel length (5 1/2") just right, as Goldilocks would say.
__________________
Twobit, Strive to live up to the opinion that your dog has of you. |
May 3, 2012, 10:19 AM | #27 |
Senior Member
Join Date: December 2, 2011
Posts: 146
|
Another pic on my Uberti 45.
|
May 3, 2012, 01:49 PM | #28 |
Junior member
Join Date: February 14, 2012
Posts: 268
|
Just by taking a small look at Towboater's gun and it's easy to see why those Uberti guns are used by the movie industry. Even up close it looks almost exactly like one of the original colts. The good thing is they work well too.
Mykeal, when a colt is referred to as pre war it's WWII that's implied. Colts made prior to the war are considered 1st generation and a premium is paid for them. After the war left over parts were used to build other colts as well. The pre '98's have an additional premium added. The bp frames were actually made well into the 1890's and colts have a plethera of configurations that can effect their values from slightly to drastically, such as having a pinched frame, which is unknown by most, but is simply a narrow spot while looking down the length of the rare sight notch. Get one of them and you've hit the lottery. People who know the colt will even measure the thickness of the frame to determine if it was refinished, which will cause metal loss. Phony markings like U.S. and inspector stamps have fooled the experts. John Kopec, who I conferred with, is the number one hands down colt expert in the world and was the original owner of Peacemaker Specialists. Being a former colt gunsmith he knew how to caseharden and blue guns using the factory methods. I sent Towboat_er a photo of a colt US Army .38LC that the govt wanted to use in place of the SAA. It was modern looking and the 1st smokeless used by the military, but after many years of use and re-works they dropped it. The SAA was king and to me is still king with the 1911 of course. |
May 3, 2012, 04:41 PM | #29 |
Junior member
Join Date: February 14, 2012
Posts: 268
|
Twobit is correct about the artillery model. They're always found with mixed numbers, which is normal for them, but there are some very rare examples with matching numbers. This is one of the most counterfeited guns on the market and are very difficult to expose when done well. Sometimes original parts are mixed in with fakes and many are even being shown in museums as original.
The 5 1/2" barrel is my favorite for obvious reasons, but is the best balanced compared to other lengths, though the 4 3/4" seems to be the most sought after. Those SAA's replaced the 38LC revolvers in the Phillipines, even though there wasn't much complaint regarding them in the Spanish American War in '98. It's been written that most of the blame for not stopping those drugged up psychos was that the troops were lousy shots, but stopping power of the 45LC cannot be disputed. Last edited by gunsmokeTPF; May 3, 2012 at 07:34 PM. |
May 3, 2012, 05:26 PM | #30 |
Senior Member
Join Date: December 2, 2011
Posts: 146
|
Very interesting stuff, thanks for sharing.
|
May 3, 2012, 08:59 PM | #31 |
Senior Member
Join Date: April 3, 2011
Location: to close to other houses
Posts: 1,176
|
towboat-er,
Did you do the "antiquing" on your Cattleman yourself? or is one of the "old west" models? Looks nice. I have the same pistol and thinking about doing some polishing on it. |
May 3, 2012, 09:51 PM | #32 | |
Senior Member
Join Date: February 27, 2008
Location: midwest
Posts: 4,209
|
top is my 3rd gen Colt bottom is USFA both 45 Colts.
__________________
rather be judged by 12 than carried by 6 Quote:
|
|
May 3, 2012, 10:06 PM | #33 |
Senior Member
Join Date: April 3, 2011
Location: to close to other houses
Posts: 1,176
|
My '73 Cattleman Hombre is my humble submission of a SAA "recreation". This is one of my favorite shooters......And it gets shot a LOT Nice looking pistols in here
|
May 4, 2012, 01:04 AM | #34 |
Junior member
Join Date: February 14, 2012
Posts: 268
|
Cimarron has a custom service that can give a pistol that peuter look and have the appearance of a 130 year old smoke wagon at a very reasonable price. They can also very tastefully slightly age the grips to match.
If stags are to your liking you can pick up a set of jigged bone grips like the ones Roy Rogers and Gene Autrey used and they're not expensive and look authentic. Real stags are more costly, but let them soak for just a little while in a pot of water with tea bags and you'll have a pair that looks naturally aged. Soak'um too long and the'll soften up and warp. John Wayne used that trick on his fake ivories. Many wonderful things can be done to that gun. It just takes a little imagination and a few bucks. |
May 4, 2012, 04:43 AM | #35 | |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,188
|
Quote:
|
|
May 4, 2012, 07:12 AM | #36 |
Senior Member
Join Date: August 22, 2009
Location: NE,PA
Posts: 390
|
Heres my ASM New Dakota model in .45lc
|
May 4, 2012, 08:50 AM | #37 |
Junior member
Join Date: February 14, 2012
Posts: 268
|
Hawg, you're correct about the jigged bone grips being associated with cowboys of "B" westerns, but there's lots of linkage between those in early Hollywood and the old west. While filming early movies, especially silent, many authentic outlaws and lawmen were actually used to recreate famous events. Butch Cassidy did his thing into the 20th century, as well as Dillinger and Bonnie and Clyde. I consider them outlaws as much as the James gang, but were just around in more modern times.
The Colt New Service, which originally came out in 1898, in my book is a western style revolver though modern by all standards. They were seen all over the place during the Mexican Revolution. All that took place during WWI. That new service had a non functioning ejector rod and housing screwed into the barrel in order to make it look like a SAA in Hollywood. Heck, Charles Bronson in the White Buffalo had a scene while waking up from a nightmare starts shooting at the mounted buffalo head on his bedroom wall. The guns used were a pair of S&W model10 heavy barrels with plastic stags and barrels with ejector rods screwed on. Even Dean Martin used phonied up Smiths as well. That's Hollywood!Those guns were used in scenes where they wanted very rapid shots. Two of my favorite all time westerns are The Wild Bunch and The Professionals. These were based in the time of the 20th century. The Winchester 1897 riot shotguns though modern if compared to a 73, or 92 and the 1911 is modern compared to an old SA are used like crazy in those films with great effect. I have jigged bone on my vintage 1920's colt new service. I even added on the Tyler T-grip, but with it's F. Mueller holster it looks western as well. I sent a photo of that one to Towboat_er also. If the 1800's authentic look is only desired then of couse the jigged bone may, or may not want to be used. But the good vintage ones make for a nice looking stag effect. I really love this subject and hope more can be discussed. Movies like I mentioned, as well as Pancho Villa, are considered westerns, though not old 1800's western. But I'd consider them authentic western for all intents and purposes. A good read if can be found is an old Guns and Ammo publication from the 1970's called "Guns of the Gunfighters". It covers as far back as Zorro in old California up to Elliot Ness. There's lots of photos of guns, gear, actual shootouts caught by the camera. It's a fascinating soft cover book worth searching for. Last edited by gunsmokeTPF; May 4, 2012 at 09:04 AM. |
May 4, 2012, 07:18 PM | #38 |
Member
Join Date: March 12, 2012
Posts: 45
|
I dont think you could call that the standard hawg haggen. Might want to think about that. wiggler
|
May 4, 2012, 07:33 PM | #39 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,188
|
Well it wasn't the only frame made but more were made of it than any other Colt single action until the so called smokeless frame came about.
|
May 5, 2012, 04:28 PM | #40 |
Member
Join Date: October 2, 2010
Location: Slovakia
Posts: 15
|
SAA Cattleman 5.1/2" - Western Saloon
My Uberti SAA Cattleman 5.1/2" - Western Saloon, cal.: 4mmM20
__________________
I am sorry for grammar, I write over PC Translator. Starr SA 1863 .44 org.,Whitney Navy .36 org.,Colt Lightning .44-40 org., Bozard & Co. Hammerless 12ga org.,Colt 12ga.org.,GEW 88,Tryon .45 DP,Sharps Carbine and Sporting .45 IAB,D.H.Hilliard .40,Barlow .40,Cub Dixie DeLux .32 DP,Colt 1861 Special Musket .58,Undehammer Billinghurst .40 &.451,Gallager .54,Hatfield .32 Carb.& Long DP,Shotgun Coach 12ga.DP, Tingle Pallmetto.36 Last edited by Black Powder; May 5, 2012 at 04:35 PM. |
May 5, 2012, 05:12 PM | #41 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,188
|
I bet that is heavy with those tiny holes.
|
May 5, 2012, 07:34 PM | #42 |
Senior Member
Join Date: March 15, 2005
Location: Central Connecticut
Posts: 3,166
|
I had never heard about the 4mm M20 before but I looked it up.
Thanks for showing us. Cartridge Image: http://img2.odklepnuto.cz/obrazek/big/item/10116234/ More Google Images: https://www.google.com/search?client...AeL30gGcv8mdBQ |
May 6, 2012, 05:34 AM | #43 |
Member
Join Date: October 2, 2010
Location: Slovakia
Posts: 15
|
Weight: 1330g.
Energy: 3,5-4J = 2,6-3ft/lb Producted especially for only Germany, price: 580,- Euro.
__________________
I am sorry for grammar, I write over PC Translator. Starr SA 1863 .44 org.,Whitney Navy .36 org.,Colt Lightning .44-40 org., Bozard & Co. Hammerless 12ga org.,Colt 12ga.org.,GEW 88,Tryon .45 DP,Sharps Carbine and Sporting .45 IAB,D.H.Hilliard .40,Barlow .40,Cub Dixie DeLux .32 DP,Colt 1861 Special Musket .58,Undehammer Billinghurst .40 &.451,Gallager .54,Hatfield .32 Carb.& Long DP,Shotgun Coach 12ga.DP, Tingle Pallmetto.36 |
May 6, 2012, 10:16 AM | #44 |
Senior Member
Join Date: January 7, 2012
Location: Auburn, AL.
Posts: 2,332
|
4mm M20
Wow, that is definitely interesting there! Thanks for posting.
(nice pistols guys!) |
May 6, 2012, 05:40 PM | #45 |
Senior Member
Join Date: May 14, 2009
Location: Macon Co. NC
Posts: 591
|
I've seen some 4mm pistols, always wondered where some ammunition could be found.
__________________
Barney Fife: "Nip it, nip it, nip it!" Andy Griffith:"Oh now Barn'...." |
May 7, 2012, 08:13 AM | #46 | |
Senior Member
Join Date: January 7, 2012
Location: Auburn, AL.
Posts: 2,332
|
Pictures hosted for Sure Shot Mc Gee
Quote:
|
|
May 7, 2012, 10:39 AM | #47 | |
Senior Member
Join Date: January 2, 2012
Location: Minnesota
Posts: 3,876
|
SAA Cattleman 5.1/2" - Western Saloon
Quote:
P. Script: Curious. A question please: How hard is it to find ammo for this little revolver? and who makes it? Thanks again, |
|
May 7, 2012, 04:48 PM | #48 |
Senior Member
Join Date: May 19, 1999
Location: Near Helena, Montana
Posts: 1,719
|
Weird, I've never even heard of such a thing.
If this is a Colt SAA thread, I have exactly one; a 1st gen .45, 26,000 range, made in October of 1876. If Uberti's, Rugers, Freedom Arms, and other single actions count, put me down for 83 more.
__________________
Sometimes the squeaky wheel gets replaced... SASS 47015 |
May 7, 2012, 10:13 PM | #49 |
Junior member
Join Date: February 14, 2012
Posts: 268
|
Interesting colt and I'd love to see a closeup of the front sight. Holster is nice as well. Is there a maker's name?
|
May 7, 2012, 10:52 PM | #50 |
Senior Member
Join Date: May 19, 1999
Location: Near Helena, Montana
Posts: 1,719
|
The front sight is fashioned from a segment of a Liberty half dollar; there is no makers mark evident on the holster.
The revolver was found under the mattress of a dead drifter in a hotel room in the Elk Park area near Butte, Montana around 1931.
__________________
Sometimes the squeaky wheel gets replaced... SASS 47015 |
Thread Tools | Search this Thread |
|
|