The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools Search this Thread
Old September 27, 2014, 04:20 AM   #1
Pond, James Pond
Senior Member
 
Join Date: July 12, 2011
Location: Top of the Baltic stack
Posts: 6,079
Gun belts: What makes a good one and....

....thereby who makes a good one?

I have a heavy belt but have non found to achieve what others describe: if I wear my RH on my hip in the forest, after 2 hours, I can definitely feel it and it is bordering on sore.

So mainly I'd like to know what qualities a good gun belt should have.

Good manufacturers are good to know but seeing as they are not likely to be sold here, I may have to ask a shoe-smith to make one.
__________________
When the right to effective self-defence is denied, that right to self-defence which remains is essentially symbolic.
Freedom: Please enjoy responsibly.
Pond, James Pond is offline  
Old September 27, 2014, 10:33 AM   #2
boondocker385
Senior Member
 
Join Date: March 6, 2013
Posts: 640
Two layers of cow leather with a plastic reinforcement works...Akers and others make them. Google "double leather" belts.
__________________
No second place finishes in a gun fight.
boondocker385 is offline  
Old September 27, 2014, 11:34 AM   #3
g.willikers
Senior Member
 
Join Date: September 28, 2008
Posts: 10,442
The one I've been using for decades was made by a harness maker at a re-enactment event.
It's thick and wide, but soft enough not to gouge a horse or me.
Maybe check with a saddle-harness maker or seller, in person or online.
Also check with the specialty competition belt makers for use in IDPA, USPSA, and the like.
They're meant to be worn all day.
__________________
Walt Kelly, alias Pogo, sez:
“Don't take life so serious, son, it ain't nohow permanent.”

Last edited by g.willikers; September 27, 2014 at 11:43 AM.
g.willikers is offline  
Old September 27, 2014, 03:02 PM   #4
Unlicensed Dremel
Junior member
 
Join Date: February 13, 2014
Location: Flathead Valley, MT
Posts: 2,187
Looper Leather makes a very good belt:

http://www.amazon.com/Reinforced-Loo.../dp/B00ENN2T4K

that's all I wear. Kydex sandwiched in the middle. Variety of colors and style available (or at least there used to be).
Unlicensed Dremel is offline  
Old September 28, 2014, 10:57 AM   #5
Micahweeks
Senior Member
 
Join Date: February 21, 2009
Location: North Mississippi
Posts: 854
Check with Rick Garcia on this forum. I bought one of his belts a couple of years ago. I'm wearing it right now and have worn it nearly every day for the past two years. Simply excellent. They are thick, stiff, comfortable, and strong. Best of all, they are great quality at an amazing price. I will be ordering another one from him soon (aiming he is still around, hope so).
Micahweeks is offline  
Old September 28, 2014, 12:45 PM   #6
tobnpr
Senior Member
 
Join Date: August 1, 2010
Location: Tampa Bay
Posts: 4,556
Clarify...
Are you feeling the belt, or the holster?

What is your current setup?

I wear a belt made by Galco Gunleather for IWB, EDC.

http://www.galcogunleather.com/
__________________
Remington 700/Savage Rebarreling /Action Blueprinting
07 FFL /Mosin-Nagant Custom Shop/Bent Bolts
Genuine Cerakote Applicator
www.biggorillagunworks.com
tobnpr is offline  
Old September 28, 2014, 01:06 PM   #7
Pond, James Pond
Senior Member
 
Join Date: July 12, 2011
Location: Top of the Baltic stack
Posts: 6,079
I have a Simply Rugged "sourdough" holster for my Ruger Redhawk 4".

It is a heavy gun, I realise, but after a couple of hours traipsing through the forest with the dogs, often doubled over trying to reach this mushroom or that.

I feel the weight of the gun more than anything. I just feel as though my hip is a bit raw from rubbing and I put it down to the holster bouncing about. The belt I use is a thick leather belt I bought from a local shoe-smith who works leather. Thick, but quite soft.

Nice leather, but I think it is a little elastic and so the holster sort of pogoes up and down as I walk and I can hear it creaking on the belt. I'd like the holster to be kept nice and snug against me without feeling like a corset.
__________________
When the right to effective self-defence is denied, that right to self-defence which remains is essentially symbolic.
Freedom: Please enjoy responsibly.
Pond, James Pond is offline  
Old September 28, 2014, 02:40 PM   #8
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
This is the one I have. http://www.bullhidebelts.com/Rich-Br...elt_p_100.html
Hawg is offline  
Old September 28, 2014, 04:29 PM   #9
gotthegoods
Member
 
Join Date: September 11, 2011
Posts: 65
I am not an expert, just a guy with 2 "value priced" leather gun belts.

I have a 1.5" 5.11 tactical casual and a black Goodrich and Gould.

Both are still in service, though the finish on the 5.11 is worn from repeatedly clipping and in clipping my aiwb holsters.

Both were around $40 USD plus tax. These are mass produced and I bought off the shelf.

It seems that leather belts from a craftsman start around $100 USD and go up from there. You get a high quality, long lasting piece of leather work for the extra $$.

Looking at both of my belts what makes different is stiffness. Two pieces of leather stitched together and my *GUESS* is something between the layers (earlier poster mention a strip of kydex). The end result is the belt remains in a "straight" line when circled around your waist. The belt can't sag or stretch at the holster contact point and better distributes the weight on your hips.

I'd try to work with your local leather guy; to buy one ready made you're looking at 50 - 150 USD plus shipping or spend an equivalent with your guy and get a true custom belt.
gotthegoods is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:20 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.06391 seconds with 10 queries