December 17, 2018, 08:51 PM | #1 |
Member
Join Date: May 28, 2018
Location: Fargo, ND
Posts: 17
|
First DA/SA Pistol
Hello all,
Lately I’ve been really interested in a DA/SA type pistol. I have striker fired and revolvers but no DA/SA semiautos. I’ve handled Sigs, CZs, and berettas. My favorite was a Sig with a short reset trigger but that was pretty spendy. I like the idea of a DA/SA trigger with a decocker but have never shot one so I’m not sure if it’s something I’ll want to keep. So....any thoughts on pistol would make a great first DA/SA gun? I would use it mainly as a range toy at first, but then I could easily see myself carrying it or using it for home defense. Thanks! |
December 17, 2018, 09:23 PM | #2 |
Senior Member
Join Date: July 21, 2011
Location: Idaho
Posts: 7,839
|
most of my experience is with sigs, berettas and springfields. I personally hated the M9, but loved the PX4. I loved the M11 and P226, but found the SP2022 to be somewhat Meh (if that makes any sense). the springfield XDe is also a decent model, but fits into an odd niche with its odd size, low ammo capacity, and somewhat heavy DA trigger weight.
my favorite has always been the P226, but we're talking about a gun that regularly reaches $1000, compared to a lot of other models that average $450 and below. I personally sold off all my DA/SAs and am pretty much SAO or DAO exclusively these days, so I might not be the best info source, but when I was shooting, those were my opinions.
__________________
ignore my complete lack of capitalization. I still have no problem correcting your grammar. I never said half the stuff people said I did-Albert Einstein You can't believe everything you read on the internet-Benjamin Franklin |
December 17, 2018, 09:42 PM | #3 |
Senior Member
Join Date: February 22, 2017
Posts: 300
|
CZs are my preference. The P-01/PCR are light enough to carry, but still have the weight that makes a range gun more enjoyable .
|
December 17, 2018, 09:54 PM | #4 |
Senior Member
Join Date: October 17, 2014
Posts: 2,444
|
I own a Sig, a Beretta, a Beretta clone (Taurus), and some CZ clones (Tanfoglios).
The Sig 229 has a great trigger and is great to shoot. It's a 40 caliber police trade-in that I got for a low price. The Beretta (40) and Taurus (9mm) both shoot fine. The trigger isn't as good as the Sig and they don't balance as well, but they go bang every time and are as accurate as most service pistols. I've had the Taurus since 1990 or so. The Beretta 96 was another police trade-in. The CZ's (clones) are probably my favorites. They have great triggers and I shoot them well. They fit my XXL hands very well. My favorite is my Israeli surplus 9mm. It is built on a slightly larger frame than the current CZ75. IMHO you can't go wrong with any of the three. Whichever one feels best in your hand (and that you shoot the best) is the right one for you. |
December 17, 2018, 10:05 PM | #5 | |
Senior Member
Join Date: March 18, 2013
Location: Northeastern US
Posts: 1,869
|
Quote:
If you want something more compact to carry, there is a special Compact Carry edition of the PX4 that comes with a bunch of upgrades, including those low-profile levers. If I was looking for a compact double-stack, that's the one I'd buy. I like the P-01 and PCR from CZ. They are good guns but I prefer the PX4. It just feels better in my hands and I naturally shoot it better. I forget which of those models from CZ came with a decocker but I remember preferring the decocking action on either the PX4 or the classic Sigs. |
|
December 18, 2018, 06:53 AM | #6 |
Senior Member
Join Date: August 11, 2016
Posts: 1,089
|
I picked the CZ P-07 as an all around gun, including carry, over the PX4. This was mainly because the gun fit my hand better, and also because I just couldn't get used to the location of the safety/decocker on the Beretta, or to the pointy/sharp "bat wing" design of the levers. I found the P-07 to be fantastic and I've had precisely zero failures in probably 3K rounds.
The Springfield XD-E is actually a pretty good and underappreciated DA/SA gun and the only single stack of that kind. If EDC is a consideration it's worth looking at because it's slim and conceals very well. But ultimately I think anything from CZ, Beretta, H&K will be a good investment. They're all reliable and will serve you well. |
December 18, 2018, 09:09 AM | #7 |
Senior Member
Join Date: December 5, 2010
Location: Miami, Florida
Posts: 6,429
|
Heckler and Koch followed by older SIG Sauer P Series pistols.
|
December 18, 2018, 09:32 AM | #8 |
Member
Join Date: December 13, 2018
Posts: 46
|
I think you'd be really happy with the PX4 compact if you thought that you might wanna carry it. For a range toy I think you'd be happy with a Beretta 92.
|
December 18, 2018, 10:07 AM | #9 |
Senior Member
Join Date: July 29, 2010
Location: The ATL (OTP)
Posts: 3,946
|
There are a lot of Police trade-in guns being sold by gun shops, so that might be a place to start. These guns may have some cosmetic wear, but are generally in good mechanical shape.
__________________
A major source of objection to a free economy is precisely that it ... gives people what they want instead of what a particular group thinks they ought to want. Underlying most arguments against the free market is a lack of belief in freedom itself. - Milton Friedman |
December 18, 2018, 10:14 AM | #10 |
Senior Member
Join Date: October 29, 2011
Posts: 1,765
|
You really need to go to a rental range and try out as many as you can to find out what works best for you. My favorites are SIGs and HKs but Beretta and CZ are terrific too.
As fas as SIGs, their are plenty of nice used SIG P226s and P229s around if you don't want to pay for a new one. I have seen nice German P226s for $600 and under and they are fantastic pistols. I bought this 9MM P226 for $500 a while back as a CPO Certified Pre Owned and recently put the short reset trigger kit on it from SIG and it cost me less than $50 to do. I also changed the grips on it.
__________________
“When the people find that they can vote themselves money that will herald the end of the republic.” ― Benjamin Franklin Last edited by sigarms228; December 18, 2018 at 10:21 AM. |
December 18, 2018, 01:08 PM | #11 |
Senior Member
Join Date: March 23, 2008
Location: Indiana
Posts: 697
|
I have two SIG P229s and several DA/SA Berettas, including a Beretta 92FS and a couple of Beretta Cougars.
The Beretta Cougar is in a sense, a precursor to the polymer-framed Beretta PX4 in that the metal-framed Cougar uses the same rotary barrel lock-up short recoil system. I have not owned a PX4 but concur that it is a very worthy choice if you are looking for a polymer-frame pistol. Note that the subcompact version of the PX4 utilizes a completely different tilt-barrel lock-up mechanism. In my opinion, the "big four" manufacturers of DA/SA hammer-fired pistols would be Beretta, SIG Sauer, Heckler and Koch, and CZ, or clones of the above such as the Taurus Beretta 92 clones and the Tanfoglio CZ clones. I do feel that the trigger action of the SIG Sauer classic P series pistols is a bit better than that of the DA/SA Beretta pistols I have shot. The HK pistols are going to be pricier still than SIGs and from my limited experience their trigger action leaves a bit to be desired. CZs feel great in the hand and their SA triggers are nice, but IMO the DA trigger actions of the CZ pistols I have shot has not been as good as that of SIGs and Berettas. But CZs and HKs have a very wide and devoted following. I would second the notion of shopping around for a nice, used SIG P226 or P229 CPO (certified pre-owned) pistol or a police trade in. There have been great deals on these in the past few years, especially if you are willing to consider one chambered in .40 S&W, a cartridge which the P226 and P229 shoot exceedingly well. I bought a CPO P229 last year with a legacy short-extractor slide and a German-made frame chambered in .40 S&W for $500 last year in like-new condition. You could make various modifications to a CPO SIG P-series pistol along the line such as a Grayguns P-SAIT trigger, an SRT (short reset trigger) kit, which is actually a modified sear and safety lever, different sights and grips, and perhaps a reduced force mainspring to lighten the DA trigger pull weight. All of these modifications can easily be accomplished by the home gunsmith. |
December 18, 2018, 03:25 PM | #12 |
Senior Member
Join Date: September 13, 2005
Posts: 4,700
|
In a factory/new package, I recommend a CZ with their Kadet unit. Fire 22s to your heart's content, when you fire CF the feel of the gun is the same.
IMHO a decocker does not take the place of safe gunhandling. When i decock my S&W M639 and M659 and Walter P-38 I keep my thumb on the hammer and lower it gently. The value of the DA/SA is somewhat exaggerated, it is SA only after the first shot. |
December 18, 2018, 05:05 PM | #13 |
Senior Member
Join Date: November 23, 2010
Posts: 4,862
|
I won't be much help in narrowing down your options. I own and enjoy a few modern 9mm DA/SA pistols, including a SIG Sauer P226 & P228 (both West German production), CZ-75 & CZ P-07, and Walther P99AS. They are all great pistols, and you would be served very well by any of them. Just pick the one you like best, and you won't be disappointed (or just get them all eventually). If you are on a budget, the CZ P-07 & P-09 are simply superb pistols that can be occasionally found for under $400.
I own a few other DA/SA pistols that fit more of a "collector" role for me, including a Walther P38 and a few 9x18mm pistols (Makarov PM, Radom P64, and a few CZ-82s). They are all well-made and fun pistols, but there are better defensive choices IMHO. . Last edited by Fishbed77; December 18, 2018 at 05:11 PM. |
December 18, 2018, 05:23 PM | #14 |
Senior Member
Join Date: December 1, 2009
Location: Stillwater, OKlahoma
Posts: 8,638
|
Consider looking at a Bersa,,,
Consider looking at a Bersa,,,
Specifically the Thunder Pro UC (Ultra Compact) 9MM. In DA/SA I own Beretta 9mm, CZ 9mm, Bersa 380, and the aforementioned Pro UC 9mm. The Beretta and CZ are simply too large for convenient carry,,, The Bersa UC in 9mm is somewhat fat like the Beretta,,, But also has the best ergonomic grip of them all. I carry smaller pistols on a daily basis,,, But when I'm riding my motorcycle,,, I shoulder holster the Bersa UC. One other thing is that it has big controls,,, And it is 100% ambidextrous. Bersa's get an automatic bad rap because of their South American origins,,, But of the three I own they are as reliable as any of my other pistols. I'm not saying they are the best pistol out there,,, I'm just saying they are worth a serious look. Aarond .
__________________
Never ever give an enemy the advantage of a verbal threat. Caje: The coward dies a thousand times, the brave only once. Kirby: That's about all it takes, ain't it? Aarond is good,,, Aarond is wise,,, Always trust Aarond! (most of the time) |
December 18, 2018, 05:55 PM | #15 |
Member
Join Date: July 8, 2018
Posts: 59
|
You owe it to yourself to check out the Bersa line of pistols, My personal favorite is the Bersa Thunder 380.
|
December 18, 2018, 06:16 PM | #16 |
Senior Member
Join Date: December 3, 2011
Location: Bellevue, NE
Posts: 981
|
Had a CZ-P07 for a while. Shot great, loved the decocker only set up on it. I definitely regret selling it, but sometimes you just need the money...
__________________
Some people are like Slinkies - not really good for anything, but you still can't help but smile when you see one tumble down the stairs. |
December 18, 2018, 06:35 PM | #17 |
Senior Member
Join Date: November 2, 2015
Posts: 777
|
Personally I'm not a big fan of recommending DA/SA semi-autos for carry as most folks don't bother to put in the effort, time, and cost of mastering the trigger. That said, most quality/modern DA/SA aemi-autos are nice so buy what you like and see what happens over time.
I'm a big fan of Beretta 92's as they shoot like a fine watch ticks, great DA/SA trigger right out of the box and they can be easily tweaked if you like. (all of mine eventually end up being converted to DAO as I'm a revolver geek and simply shoot its DA trigger better) Someone above mentioned the PX4 being under appreciated and I couldn't agree more, they are quality, outstanding pistols and pleasure to use. One benefit of them is that you can convert them to a number of modes, so if you end up not liking DA/SA you can switch it to any one you like (another under appreciated aspect of them). If you dig it long term you can also add a CX4 Storm, use the same magazines, and have a great self-defense package. |
December 18, 2018, 07:38 PM | #18 |
Senior Member
Join Date: January 4, 2016
Posts: 757
|
I am always happy to brag about and recommend my FNH FNX40. Certainly doesn't have to be a .40 if that's not your preferred flavor but mine has been fantastic and problem free for years.
I was between the FNX and PX4 storm for a while but when I finally got my hands on one the ergonomics of the FNX won me over instantly. |
December 18, 2018, 08:24 PM | #19 |
Member
Join Date: March 24, 2011
Location: Bella Vista, AR
Posts: 73
|
Another often overlooked DA/SA option is the Beretta/Stoeger Cougar 8000. It is the alloy framed predecessor to the polymer framed PX4 Storm. It uses the same rotating barrel action and is only slightly heavier than the Storm. It is a cheaper but equally good alternative to the Strorm. I have one and it is my favorite DA/SA pistol. Well now that I think about it, its actually my favorite of all the handguns I own or have previously owned.
http://www.beretta.com/en/stoeger-cougar-8000/ Last edited by bjw741; December 19, 2018 at 08:36 AM. |
December 18, 2018, 10:05 PM | #20 |
Member
Join Date: June 25, 2016
Location: Western Kentucky
Posts: 30
|
+1 for the Bersa Thunder 380. I've had mine for better than 10 years, I liked it so much I ordered a Thunder .22 about 9 years ago. I ordered the T-.22 because it is the exact same size, and feel as the T-380. It made for cheap range time, until I decided to add .380acp to my reloading rotation.
I am sitting here trying to think if I've EVER had a "true" malfunction with either of these guns that was an actual gun problem. I really do not believe I have. I've let the little T-.22 get a bit dirtier than normal, and it started to "choke" and had some fte's. Once cleaned up, it was right back in business. As for the T-380, it has been stellar. I haven't had either out in quite some time. I'm going to have to get them out of the safe, and let 'em stretch out next time I go to my club. I also have a CZ 75 SP-01, Shadow, that came out of the CZ Custom Shop, then was worked over by CGW!! That gun is my "race gun"! It is a pleasure to shoot, and gets to the range quite often. I also have others that fit into your catagories.
__________________
MO Member: NRA/Kentucky Regulators Gun Club/LaSalle Sportsmen's Club |
December 19, 2018, 07:28 AM | #21 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,380
|
I've had several over the years... a Beretta 92, which I later sold, my deceased Father's East German Makarov, my Smith & Wesson 410, and my S&W 4506.
I'm OK with the action, but I'm at heart a revolver shooter, so I actually wouldn't mind getting a DAO semi-auto.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
December 19, 2018, 08:08 AM | #22 |
Member
Join Date: August 7, 2016
Posts: 57
|
Sig p226 and Beretta 92 all the way!
|
December 19, 2018, 10:43 AM | #23 |
Senior Member
Join Date: February 12, 2005
Location: North central Ohio
Posts: 7,486
|
I'm a big advocate for the use of DA/SA pistols for self-defense-but a caveat is that's how I was trained. Many fine pistols have been recommended and I have a few that were cited, including an H&K USP40, a Beretta 92, a CZ 85B, a couple of SIGs (models 226 and 227) and a couple of Smith&Wesson "Third Generation" autos (models 6906 and 4006). I like them all but if I had to pick only one to have, after much weeping, wailing and gnashing of teeth, it would be the Smith Model 4006.
__________________
ONLY AN ARMED PEOPLE CAN BE TRULY FREE ; ONLY AN UNARMED PEOPLE CAN EVER BE ENSLAVED ...Aristotle NRA Benefactor Life Member |
December 19, 2018, 04:43 PM | #24 | |
Senior Member
Join Date: March 18, 2013
Location: Northeastern US
Posts: 1,869
|
Quote:
That said, I think either the simple striker trigger or the DA/SA without a manual safety is simpler, easier, and more reliable than any gun with a manual safety. Forgetting or fumbling with a manual safety isn't a theoretical concern. It can and does happen in stressful situations. |
|
December 19, 2018, 05:01 PM | #25 |
Senior Member
Join Date: May 22, 2011
Posts: 12,211
|
As someone that has shot both extensively, to me DA/SA takes both more time to build proficiency and more practice to maintain proficiency than a Glock style "safe-action" trigger. Now a lot of that practice can be through dry fire.
I'd suggest a used SIG or HK. In my experience most people that own them tend to take good care of them and what you get is often very lightly used. Given you're not sure what you do or don't want buying used also saves you money lost on resale. Sent from my Pixel 2 using Tapatalk |
Thread Tools | Search this Thread |
|
|