The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old March 26, 2017, 10:13 PM   #26
shuvelrider
Member
 
Join Date: October 2, 2011
Posts: 63
I agree with DT Guy. I have a .41 NMBH that wandered on the target. Turned out to be a loose rear sight. It was wiggling on the roll pin that held it in place. I removed it, and "upset" the edges of the sight with a pin punch and re-installed. No more problems. The sight had become loose over some time though. By upsetting the edges of the sight base in four places, it gave the sight a gripping surface for the recess it fit into. Easy little job.
shuvelrider is offline  
Old March 28, 2017, 01:37 AM   #27
bamaranger
Senior Member
 
Join Date: October 9, 2009
Location: North Alabama
Posts: 5,785
ammo

I'd shoot again, and I'd try other ammo.

I shot very poorly a week or so ago at a local match. Something had to be up, I suspected the sights had gotten out of wack. When I took the handgun to the range and shot it off bags at 15 yds, the next day, I could not hit a 9" pie plate. Looked like a load of buckshot! Turns out my plated bullets were the culprit.

True jacketed ammo shot just fine. Perhaps Fiocchi has loaded some ammo with undersized slugs or some other glitch.
bamaranger is offline  
Old March 28, 2017, 06:31 AM   #28
buck460XVR
Senior Member
 
Join Date: December 28, 2006
Posts: 3,352
From what I've read, the OP is an experienced SA revolver shooter, tried three different types of ammo, shot both freehand and off a rest and even at the short distance of 15 yards, could not hit the inside of a barn with the new Ruger, but shot well with another revolver. I'm gonna bet it's an issue with the gun and trying all the ammo in the world is not going to solve the problem. While revolvers can be finicky about ammo, FME, at 15 yards, the gun should at least pattern with one of the three the OP tried.
buck460XVR is offline  
Old March 28, 2017, 09:44 PM   #29
hornetguy
Senior Member
 
Join Date: January 14, 2011
Location: on the north side of DFW
Posts: 929
The only other possibility that hasn't been explored (unless I missed it) is if you shot the 38sp lead loads first, and they were undersized, causing severe leading of the bore.

After that, not much of anything will shoot right.... (ask me how I know )

Although, that is really bad grouping for 15yds.... I'm not sure if severe leading can cause it to be THAT bad.

If the bore isn't heavily leaded, I would send it back to Ruger... something is definitely wrong.
__________________
I always felt that if I got to the point where I thought it was time to bury my firearms, it was actually time to pick them up..
hornetguy is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:02 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2016 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06526 seconds with 10 queries