Blazer brass

springmom · October 8, 2006, 01:08 PM

Quick question: can you reload Blazer brass?

We're fixing to get into reloading for at least our .45's, and eventually when we get a .44 mag. Usually we shoot Blazer brass because our guns digest it fine and it's cheap. But I need to know if we can keep the cartridges and reload them. (Not the aluminum stuff, I know it can't be reloaded).

Thanks.

Springmom

silicon wolverine · October 8, 2006, 02:57 PM

Yes you can but its life is limited compared to other brass. I get about three loadings out of blazer brass and its shot. i can get almost 10 loads out of winchester or even up to fifteen out of starline.

SW

October 8, 2006, 01:08 PM	#1
springmom Senior Member Join Date: October 26, 2005 Location: Houston area Posts: 1,823	Blazer brass Quick question: can you reload Blazer brass? We're fixing to get into reloading for at least our .45's, and eventually when we get a .44 mag. Usually we shoot Blazer brass because our guns digest it fine and it's cheap. But I need to know if we can keep the cartridges and reload them. (Not the aluminum stuff, I know it can't be reloaded). Thanks. Springmom __________________ I will not be a victim home on the web: www.panagia-icons.net (my webpage) www.nousfromspring.blogspot.com (Orthodoxy) "I couldn't hear you. Stop firing the gun while you're talking!" Frank Drebin, The Naked Gun

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

October 8, 2006, 02:57 PM	#2
silicon wolverine Senior Member Join Date: April 28, 2006 Location: South dakota Posts: 674	Yes you can but its life is limited compared to other brass. I get about three loadings out of blazer brass and its shot. i can get almost 10 loads out of winchester or even up to fifteen out of starline. SW