|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
March 12, 2013, 09:34 PM | #1 |
Member
Join Date: July 29, 2012
Location: Lubbock, Texas
Posts: 45
|
Trying to identify a 30-06
I am trying to identify a 30-06 rifle that my dad gave me over 30 years ago. Unfortunately, it was stolen about 2 months after I got it. I lost my dad a few years ago and I have now decided that I would like to replace it with a similar gun.
All I remember is that it was a Remington pump action 30-06 with a weaver scope. My guess is that it must have been made sometime in the 1960's. Is the Model 760 the only Remington 30-06 pump made at the time? So far that is all that I have been able to find, and I was just wondering if there are any other options. Any help would be greatly appreciated! |
March 12, 2013, 10:01 PM | #2 |
Senior Member
Join Date: June 9, 2009
Posts: 119
|
Trying to identify 30.06
I cannot say for sure about other pump actions besides the Remingtons but I know Rem made a M14 and another model that were prior models to the 760. They were chambered in .30 Rem and .35 Rem, maybe even .25, not sure about the 30.06 chambering in the pre 760's tho. I have seen the 760's chambered for 30.06. G/L with your search. Tom L
|
March 12, 2013, 11:02 PM | #3 |
Senior Member
Join Date: February 18, 2013
Location: closer than you think
Posts: 967
|
Probably a 7600. They are quite common now days. They had two in stock the other day at my local Cabela's with beautiful wood for $700. I've seen good used ones for as low as $250. I have the auto version(7400) in 30-06 and love it. I've had it over 15 years and it has never failed me.
Good luck with your search. Boomer
__________________
The number one cause of death in the 20th century. 290,000,000 citizens were first disarmed and then murdered by their own governments. This number does not include those killed in war. We're from the government, we're here to help |
March 13, 2013, 12:57 AM | #4 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
The 760 was produced 1952-1981, the 7600 was introduced in 1982 and is still in production, the Model 6 was introduced in 1981 and produced 1987. All three models look vaguely similar, but there are some differences. Do you remember what the wood looked like? The 760 had either smooth wood or that really awful reverse diamond stamped checkering, the 7600 and Model 6 had machine cut checkering or rolled basketweave checkering. There was also the Sportsman 76, a basic, no-frills version of the 7600 with stained birch stocks and matte bluing on the metal.
Model 7600
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
March 13, 2013, 07:37 AM | #5 |
Senior Member
Join Date: September 19, 2008
Posts: 4,678
|
FWIW, This is a typical 60's Remington Model 760
. |
March 13, 2013, 10:18 AM | #6 |
Senior Member
Join Date: June 9, 2009
Posts: 119
|
Trying to identify
The pic from PetahW is exactly what I know to be a 1950/60's 760 version. My father had one in .35. The pre 760 had a spiral groove cut in the slide tube as I remember and I beleive its function was to unlock the bolt when ejecting the empty, it is very obvious if one turns the rifle upside down and looks at the slide tube. The forearm was nothing like the 760 in appearance so if you remember its appearance that might help in your search. I had the pleasure of using my Dad's 760 many times and it was a very deadly rifle on whitetail and black bear using the standard 200 grain psp. TomL
|
March 13, 2013, 12:19 PM | #7 |
Senior Member
Join Date: October 29, 2010
Location: Michigan
Posts: 114
|
Tom,
The spiral in the previous version of Remington's pump action rifles was to avoid bullet tip to primer contact. They had a tubular magazine similar to their pump action shotgus of the day. They were also only chambered for mid range cartridges, 35Rem, 30Rem, 25Rem, etc. When they brought out the 760they were box magazine fed and they added the -06 class of cartidges. I have never owned one, but recently made a foolish decision to pass on a clean, solid 760 chambered in .257 Roberts for only $200. Went back the next day and it was gone. Hindsight is 20-20 as they say. |
March 13, 2013, 05:10 PM | #8 |
Senior Member
Join Date: February 17, 2013
Location: Louisville, KY, USA
Posts: 273
|
"I have never owned one, but recently made a foolish decision to pass on a clean, solid 760 chambered in .257 Roberts for only $200. Went back the next day and it was gone."
I'd have had to open an artery.......... And I can't even hunt anymore.
__________________
"Don't let macho be your epitaph." ---Ed Lovette |
March 13, 2013, 07:56 PM | #9 |
Senior Member
Join Date: June 9, 2009
Posts: 119
|
trying to identify
bull bob, thanks for the info on the pre 760. I was not sure about the spiral nor did I know they were tube fed. To bad about the .257 Roberts/760 that was a rare find. TomL
|
March 14, 2013, 08:27 PM | #10 |
Member
Join Date: July 29, 2012
Location: Lubbock, Texas
Posts: 45
|
Thanks for all the info guys. It looks like it must be the 760. Now I just have to start saving my pennies so I can buy one!
|
March 14, 2013, 11:22 PM | #11 |
Member
Join Date: July 29, 2012
Location: Lubbock, Texas
Posts: 45
|
257
Bull Bob, I just noticed a model 760 in a 257 on Gunbroker.com. Not for $200 though
|
|
|