|
February 22, 2013, 03:22 PM
|
#1 |
|
Senior Member
Join Date: January 11, 2013
Posts: 257
|
Browning 1910 .380
I was reading that a magazine for a Browning 1910 or 1955 in a .380 cal. will also allow allow .32 magazine to hold .380 shells? Has anyone shot .380 shells from a mag marked .32 and fire successfully?
J |
|
|
February 22, 2013, 03:50 PM
|
#2 |
|
Senior Member
Join Date: October 20, 2007
Location: Richardson, TX
Posts: 7,523
|
I've shot .32ACP successfully using a .380ACP mag in the very similar Model 1922.
A friend who sold me the pistol told me that the only difference between the mags is the number of counting holes and a very subtle difference in the angle of the feed lips. The mags will often interchange with no issues at all, and it worked when I tried it. If it decides to be fussy, bend the .32 mag's feed lips outward slightly, or inwards for a .380 mag in a .32. Be aware, however, that 1910 and 1922 mags will NOT interchange due to the heel mag release.
__________________
"Smokey, this is not 'Nam. This is bowling. There are rules... MARK IT ZERO!!" - Walter Sobchak |
|
|
|
February 22, 2013, 06:44 PM
|
#3 |
|
Junior member
Join Date: June 21, 2009
Location: NE Ohio
Posts: 1,176
|
He is asking if you can go the OTHER way, .380's in a .32 mag.
|
|
|
|
February 22, 2013, 08:01 PM
|
#4 |
|
Senior Member
Join Date: January 11, 2013
Posts: 257
|
Yes you missed the point, carguychris, a .380 shell in a .32 acp mag is what I thought I meant. Thanks
J |
|
|
 |
|
|
