The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old October 24, 2011, 02:21 PM   #1
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,380
I'm not looking forward to this...

I have to disassemble my reloading bench.

My water heater is on the way out, and the reloading bench (not a big one, but big enough) is in the way.

Oh well, good reason to sort through everything and give it a thorough cleaning.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old October 24, 2011, 02:24 PM   #2
jimbob86
Junior member
 
Join Date: October 4, 2007
Location: All the way to NEBRASKA
Posts: 8,722
If you had put it together with quality screws, you could take it out and then put it right back in....
jimbob86 is offline  
Old October 24, 2011, 02:25 PM   #3
Don P
Senior Member
 
Join Date: December 17, 2005
Location: Swamp dweller
Posts: 6,187
Boy that sucks and blows the wazoo!
__________________
NRA Life Member, NRA Chief Range Safety Officer, NRA Certified Pistol Instructor,, USPSA & Steel Challange NROI Range Officer,
ICORE Range Officer,
,MAG 40 Graduate
As you are, I once was, As I am, You will be.
Don P is offline  
Old October 24, 2011, 02:26 PM   #4
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,380
I did use screws.

It's just the thought of cleaning everything off of it, moving everything, and then getting everything back on it that's annoying.

Plus we're talking a pretty tight space. Not a lot of places to move it once I do get it out.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old October 24, 2011, 02:26 PM   #5
oneounceload
Junior member
 
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
When I made mine out of wood, I used lag bolts, now I use Gorilla Racks from Sam's (or Costco) - they go together and break down with a rubber mallet in seconds
oneounceload is offline  
Old October 24, 2011, 02:29 PM   #6
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,380
One of my future plans is to move a couple of walls in my basement. Once I do that, it will open up a lot of space in the back room, and then I can go for something like a gorilla rack.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old October 24, 2011, 02:31 PM   #7
Brian Pfleuger
Moderator Emeritus
 
Join Date: June 25, 2008
Location: Austin, CO
Posts: 19,578
I hate doing stuff like that. Taking it down just to put it all back seems like a total waste of time and effort on both sides. Sometimes, it's just got to be done. A good cleaning and reorganizing might at least make it feel semi-worthwhile.
Brian Pfleuger is offline  
Old October 24, 2011, 02:45 PM   #8
Charlie98
Senior Member
 
Join Date: September 6, 2006
Location: Great state of Texas
Posts: 1,077
Use this time to clean everything up and maybe analyze your space to better utilize it. Lemonade out of lemons...
Charlie98 is offline  
Old October 24, 2011, 03:03 PM   #9
Don P
Senior Member
 
Join Date: December 17, 2005
Location: Swamp dweller
Posts: 6,187
OK Mr doesn't get out much here so I have to ask, what the hell is a gorilla rack?
__________________
NRA Life Member, NRA Chief Range Safety Officer, NRA Certified Pistol Instructor,, USPSA & Steel Challange NROI Range Officer,
ICORE Range Officer,
,MAG 40 Graduate
As you are, I once was, As I am, You will be.
Don P is offline  
Old October 24, 2011, 03:12 PM   #10
aarondhgraham
Senior Member
 
Join Date: December 1, 2009
Location: Stillwater, OKlahoma
Posts: 8,638
Take pictures before you disassemble it.

Don't laugh,,,
It's worth your time.

Aarond
__________________
Never ever give an enemy the advantage of a verbal threat.
Caje: The coward dies a thousand times, the brave only once.
Kirby: That's about all it takes, ain't it?
Aarond is good,,, Aarond is wise,,, Always trust Aarond! (most of the time)
aarondhgraham is offline  
Old October 24, 2011, 03:46 PM   #11
mrawesome22
Senior Member
 
Join Date: November 9, 2005
Location: Ohio, Appalachia's foothills.
Posts: 3,779
Maybe you will find some stuff you forgot you had.
mrawesome22 is offline  
Old October 24, 2011, 04:01 PM   #12
azphx55
Member
 
Join Date: September 7, 2010
Posts: 85
Maybe I can make you feel better:

When I mentioned to my wife that our water heater is old enough that we should replace it before it fails, she decided that it provided an opportunity to remodel the adjacent utility room, involving moving a lot of plumbing, the gas line, and various vents. And while we're doing that, we might as well move this door over to here, and ...
azphx55 is offline  
Old October 24, 2011, 04:26 PM   #13
David Bachelder
Senior Member
 
Join Date: August 23, 2011
Location: Trinity, Texas
Posts: 636
Sounds like my wife. "You know? Since we bought new dishes, I think it's a good time to remodel the kitchen."

Where does that come from?
David Bachelder is offline  
Old October 24, 2011, 05:20 PM   #14
UtopiaTexasG19
Senior Member
 
Join Date: July 3, 2011
Location: S.E. Texas Gulf Coast
Posts: 743
Maybe you'll find that one pound jar of powder you bought back when it was $12!
UtopiaTexasG19 is offline  
Old October 24, 2011, 05:32 PM   #15
Hog Buster
Senior Member
 
Join Date: October 26, 2009
Location: Pointe Coupee, Louisana
Posts: 772
Get smart! Put it on wheels. I’ve dropped so much crap that rolled under mine I decided to build it so it could be moved. Cast iron wheels and built of 2X6’s. Heavy as hell, it don’t move without some effort. Still better than unloading it or having to crawl around trying to find something you dropped. And, everything is stored n one place, in it. Plus in a pinch you can pull it out and have 3 more sides to load up with junk.
__________________
Those who beat their guns into plows, will plow for those who don't.-Thomas Jefferson
Hog Buster is offline  
Old October 24, 2011, 05:33 PM   #16
maggys drawers
Senior Member
 
Join Date: March 4, 2006
Posts: 178
Don't forget to drain the water heater before you carry it up the stairs. I knew a guy that lugged a full water heater out of the basement....once.
maggys drawers is offline  
Old October 24, 2011, 06:21 PM   #17
Dave P
Senior Member
 
Join Date: August 16, 1999
Location: North Florida
Posts: 1,346
Mike, ask yourself one simple question: Do I really need hot water?

How would Al Gore answer that one?
__________________
I think this country is screwed.
Dave P is offline  
Old October 24, 2011, 07:54 PM   #18
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,380
Space in this room is so tight that there's no way to put anything on wheels.

I have the back of the bench anchored to a ledger on the wall studs and the front of it supported on 2x4 legs.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old October 24, 2011, 08:17 PM   #19
SHNOMIDO
Senior Member
 
Join Date: June 23, 2011
Location: Illinois
Posts: 423
post a pic

lets all catch a glimpse of your personal hell.
SHNOMIDO is offline  
Old October 24, 2011, 08:26 PM   #20
highvel
Senior Member
 
Join Date: January 21, 2010
Location: Powhatan VA
Posts: 633
Sounds like a little "man cave" that you talked momma into calling your own
__________________
Do not argue with an idiot. He will drag you down to his level and beat you with experience.--Mark Twain

"I have opinions of my own 'strong opinions' but I don't always agree with them."--George Bush
highvel is offline  
Old October 24, 2011, 08:53 PM   #21
pgdion
Senior Member
 
Join Date: April 22, 2010
Location: MPLS, MN
Posts: 1,214
Oh I can sympathize with you mike, had to do the same thing last spring. Bench is in the back room with the furnace and water heater. Started dripping one day (sure glad I caught it before it let loose). No fun working around the bench. Even worse was buying another unit to fit the space. Had to spend an extra $100 so my bench wouldn't be affected by it. I spent extra too to get the longest life unit I could (so I wont have to do it again for 20 years!
__________________
597 VTR, because there's so many cans and so little time!
pgdion is offline  
Old October 24, 2011, 09:38 PM   #22
Crankgrinder
Senior Member
 
Join Date: July 24, 2011
Location: Texas
Posts: 917
i know that feeling, but i have lived in appartments and rent houses forever and i have a reloading bench that folds up after i dismantle my press and unbolt it and on the other hand i always end up with those cheap boxed-up computer desks so my setup is relatively portable.
Crankgrinder is offline  
Old October 24, 2011, 09:45 PM   #23
DRice.72
Senior Member
 
Join Date: October 19, 2009
Location: Western North Carolina
Posts: 451
That is another thing I'll have to consider as I read about reloading. I rent and will have to move the bench. The bench will have to be sturdy, but something I can move without putting myself in the hospital.
__________________
They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety - Benjamin Franklin
Light is faster than sound. This is why some people appear bright unitl you hear them speak!
They should have stopped with "Congress shall make no Law...
DRice.72 is offline  
Old October 24, 2011, 10:09 PM   #24
Chaz88
Senior Member
 
Join Date: January 4, 2010
Posts: 1,243
I now feel spoiled having a small bedroom just for my guns and reloading equipment. It is also nice that I own the house because I screwed the bench to the floor and wall.
__________________
Seams like once we the people give what, at the time, seams like a reasonable inch and "they" take the unreasonable mile we can only get that mile back one inch at a time.

No spelun and grammar is not my specialty. So please don't hurt my sensitive little feelings by teasing me about it.
Chaz88 is offline  
Old October 24, 2011, 10:28 PM   #25
FrankenMauser
Senior Member
 
Join Date: August 25, 2008
Location: In the valley above the plain
Posts: 13,424
Consider a redesign of the bench, before you get dirty. It's a great time to modify.



...The situation reminds me of a friend from Maryland, though. He spent nearly 20 years building an N-Scale railroad empire. Then, one fateful day... the water heater stopped heating. Since he had engulfed the water heater in his empire, and had not used construction methods that allowed easy disassembly... he had to destroy the heart of his baby, and start over. But, he made some improvements with the new design.
__________________
Don't even try it. It's even worse than the internet would lead you to believe.
FrankenMauser is offline  
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:48 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.11452 seconds with 10 queries