February 5, 2012, 10:52 PM | #1 |
Senior Member
Join Date: November 15, 2007
Location: The Alamo!
Posts: 2,056
|
New SigPro SP2022
Hi guys, I picked up a new SP2022 9mm.
First impressions are all good. I like the look of the gun and the ergos, it fit's my hand well and seems very well built. Comes in a plastic case with one mag and an extra grip. I believe the medium is installed and the large is in the case. Takedown and reassemble takes a little getting use to, but I have been practicing and see no problem, it should get easier with use. The DA pull is smooth and steady and should make for an ideal home defense gun. The SA pull is light and very easy, should also make for a great range gun. I did not buy this gun for carry. As soon as I get her out, I'll post a range report. Overall, I'm very excited and pleased so far. Thanks to the members here that recommended this gun to me. Lee |
February 5, 2012, 10:54 PM | #2 |
Senior Member
Join Date: January 31, 2000
Location: Texas (By Way of Illinois)
Posts: 1,376
|
Congrats; you have a fine pistol. And for what these are going for, they are one of the best buys in the handgun world today.
__________________
Midwestern Ramblings (my amateur firearms blog): http://martowski.wordpress.com/ |
February 5, 2012, 11:06 PM | #3 |
Senior Member
Join Date: April 28, 2007
Location: Middle of Wyoming Somewhere
Posts: 197
|
Very nice gun... They are going for $400.00 and $440.00. I about picked one up this weekend but I was looking for something a little smaller for CCW. I ended up getting Ruger SR9C. I love the look and price of the Sig 2022 and its a Sig.
|
February 5, 2012, 11:06 PM | #4 |
Senior Member
Join Date: November 15, 2007
Location: The Alamo!
Posts: 2,056
|
Thanks!
I really like the decocker too! |
February 5, 2012, 11:08 PM | #5 | |
Senior Member
Join Date: November 15, 2007
Location: The Alamo!
Posts: 2,056
|
Quote:
|
|
February 5, 2012, 11:59 PM | #6 |
Senior Member
Join Date: April 3, 2011
Posts: 2,088
|
Congrats on your new gun! Hope it serves you well.
I am a happy owner of a made in Germany SP2022. I looked at one today that had the stainless diamond plate slide with night sights. It was a good price for $419. I was about to buy it to add to the one I already have. However, I saw another Sig pistol and that one came home with me instead. |
February 6, 2012, 10:26 AM | #7 |
Member
Join Date: December 2, 2010
Location: NY
Posts: 61
|
I have one in 9mm I love it. I broke the extractor on it within 300 rounds within a month though. But since it has come back its be 100% dead on.
I wish it came with 2 mags cause spare mags run 35.00+. But it sa good gun and a SIg so you cant go wrong. I love the way it looks to. I replaced my P95 with this.
__________________
NYS Unrestricted | PA CCP | FL CCP NRA Member "Reading,Learning and Doing" |
February 6, 2012, 01:34 PM | #8 |
Senior Member
Join Date: December 23, 2010
Location: Chicagoland
Posts: 1,293
|
My brother in law has one and loves it, going to have to shoot it a bit when I go to Ohio to visit over the 4th.
|
February 6, 2012, 02:13 PM | #9 |
Senior Member
Join Date: April 3, 2011
Posts: 2,088
|
kflo01 - did yours have the internal or external extractor?
|
February 6, 2012, 03:51 PM | #10 |
Junior member
Join Date: September 29, 2004
Location: WV
Posts: 454
|
I noticed some of the recent production guns came from the factory with the barrel hood in the white while others are blued. I wonder why?
|
February 6, 2012, 04:22 PM | #11 | |
Senior Member
Join Date: May 22, 2011
Posts: 12,212
|
Quote:
__________________
Know the status of your weapon Keep your muzzle oriented so that no one will be hurt if the firearm discharges Keep your finger off the trigger until you have an adequate sight picture Maintain situational awareness |
|
February 7, 2012, 08:28 AM | #12 | |
Senior Member
Join Date: April 10, 2008
Location: Alaska
Posts: 7,014
|
Quote:
Love SP2022, and I bought it sight unseen and no handling (some guns just not available up here) I did shoot and handle a P220 (old style). Everything I read indicated the SP2022 matched up well with that. Spot on. More than met what I wanted, exceeded expectations. SP2022 is simpler as it only has two levers. Coming from 1911 type where there was no de-cocker, this is just too nice. Reliable, accurate, very good price. Adjustable grips (went with the larger ones finally but the mid size not too bad). Trigger is good revolver type DA, and the SA is as good as it gets short of a 1911 type. |
|
February 7, 2012, 09:50 AM | #13 | ||
Junior member
Join Date: September 29, 2004
Location: WV
Posts: 454
|
Quote:
Quote:
|
||
February 7, 2012, 11:24 AM | #14 | |
Senior Member
Join Date: May 11, 2009
Location: Phoenix
Posts: 4,580
|
Quote:
That's a signature thing for almost all Sig models. The top of the barrel hood is always left stainless while the rest is blued.
__________________
Handguns: 2x Glock 19.4 | Glock 26.4 | HK USP 9 | HK P2000 | HK VP9 SK | HK P30 | CZ Shadow 2 | CZ P-10 C | CZ P-07 | CZP-01 | S&W 360PD Rifles: DDM4 | SGL 21 | SAM7K | Draco | PSA PDW SBR | ASA Side-Charger SBR | CZ Scorpion K SBR | Aero M4E1 9" 300blk SBR | Angstadt Jack9 SBR | Savage Mark II FV-SR Shotguns: Mossberg 590A1 20" SP | Mossberg Shockwave |
|
February 7, 2012, 12:08 PM | #15 |
Member
Join Date: December 2, 2010
Location: NY
Posts: 61
|
Marquezj16 it was a internal extractor.
__________________
NYS Unrestricted | PA CCP | FL CCP NRA Member "Reading,Learning and Doing" |
February 7, 2012, 01:02 PM | #16 |
Senior Member
Join Date: April 3, 2011
Posts: 2,088
|
kflo01- I have one with the internal extractor too. No problems on mine to date. Was your's made in Germany or Exeter? How long did Sig take to repair it?
|
February 7, 2012, 01:24 PM | #17 |
Senior Member
Join Date: May 22, 2011
Posts: 12,212
|
Lol. Amazes me when people can't pick up a wise crack. Relax people.
__________________
Know the status of your weapon Keep your muzzle oriented so that no one will be hurt if the firearm discharges Keep your finger off the trigger until you have an adequate sight picture Maintain situational awareness |
February 7, 2012, 01:52 PM | #18 |
Member
Join Date: December 2, 2010
Location: NY
Posts: 61
|
It was made in Exeter. The turnaround time was about 2 weeks to get fixed. Not bad. You send the gun to them via UPS. You get the gun back via Fed Ex.
__________________
NYS Unrestricted | PA CCP | FL CCP NRA Member "Reading,Learning and Doing" |
February 7, 2012, 03:25 PM | #19 |
Senior Member
Join Date: April 3, 2011
Posts: 2,088
|
Good to hear it did not take too long. Glad to know they did it right too as you stated "no problems since".
|
February 7, 2012, 04:28 PM | #20 | |
Senior Member
Join Date: October 29, 2011
Posts: 1,768
|
Quote:
|
|
February 15, 2012, 06:47 PM | #21 |
Senior Member
Join Date: March 11, 2009
Location: Atlanta, GA
Posts: 247
|
I read that in 2008 they started making the 2022 in Germany. If I were to buy a new one now, how would I tell where it was made? I might have to order it.
Also, is the guide rod steel? Thank you. Tim S. |
February 15, 2012, 06:52 PM | #22 |
Junior Member
Join Date: February 8, 2012
Posts: 12
|
Congrats. I've been thrilled with mine so far. For the price, it's tough to beat.
Tim: I think all the new ones are Exeter. If you want a German you'll have to go older. Someone jump in and correct me if I'm wrong. Last edited by Tucker3434; February 15, 2012 at 07:00 PM. |
February 15, 2012, 07:10 PM | #23 |
Senior Member
Join Date: October 12, 1999
Location: North Texas
Posts: 2,834
|
The best value in handguns in America today hands down.
__________________
"Without a rifle you are nothing, worthless, you are waiting for death, any minute, any second." -- Aron Bielski |
February 15, 2012, 07:36 PM | #24 | |
Senior Member
Join Date: October 29, 2011
Posts: 1,768
|
Quote:
The guide rod is poly. If you look hard enough you might be able to find a German made SP2022 with triple serial numbers and Ilaflon finish. They are more and getting pricier because of the scarcity of them but worth the extra money IMO if you can get one around $500. |
|
February 15, 2012, 07:38 PM | #25 |
Senior Member
Join Date: June 30, 2010
Location: NC
Posts: 5,309
|
Hard to find the German ones these days.... They came with night sights and 3 mags. I replaced the medium grip with the small one.
__________________
-The right to be left alone is the most comprehensive of rights, and the right most valued by free people.-Louis Brandeis -Its a tool box... I don't care you put the tools in for the job that's all... -Sam from Ronin -It is the mark of an educated mind to be able to entertain a thought without accepting it. -Aristotle |
|
|