The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools Search this Thread
Old June 6, 2017, 11:36 AM   #1
Senior Member
Join Date: October 4, 2008
Location: WI
Posts: 3,541
AR10 and 15 Vise blocks options?

Hey guys,

I've been working on numerous ARs and I have the Bev block for AR15s but nothing for AR10s like my M&P10 I usually clamp it in the vice at 90 degrees with wood to protect the top and bottom.

I was wondering what kind of 'over the upper' style blocks you guys use. I didnt enjoy torquing down barrel nuts in this way especially on the MP10 or any smaller AR15 that the bev block doesn't fit in (22,9, 762x39 etc)

I feels like I am going to eventually twist, warp or damage an upper or something so any suggestions would be greatly appreciated.
E-Shock rounds are engineered to expend maximum energy into soft targets, turning the density mass into an expanding rotational cone of NyTrilium matrix particles, causing neurological collapse to the central nervous system.- Yeah I can do that.
I guarantee you will know it if a bicyclist hits your house going 1000 mph. -Smaug
Venom1956 is offline  
Old June 18, 2017, 11:37 PM   #2
the gman
Junior Member
Join Date: June 18, 2017
Posts: 1
First post on these forums and I have no connection to the firm I'm about to recommend other than as a satisfied customer. Their products are sound and cost effective but they also work real well.
the gman is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 07:22 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2016 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.06422 seconds with 9 queries