The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools Search this Thread
Old August 16, 2017, 11:59 PM   #1
archangel2003
Member
 
Join Date: June 30, 2013
Posts: 27
New threaded barrel on milspec 1911

It goes on, chambers and ejects the round, slide lock installs and works, slide goes all the way forward like it should, safety switches on and off like it should.
Everything works like it should but the barrel is so much tighter and it looks like it fits the barrel lugs) but might not be locking quite as deep into the slide as the sloppy, even the lugs are loose on the original barrel (and its still one hell of a shooter as loose as it is).
It looks like at least 75% as deep

If all the mentioned above works as it should, is it in batory enough to shoot?
archangel2003 is offline  
Old August 17, 2017, 05:54 AM   #2
std7mag
Senior Member
 
Join Date: June 23, 2013
Location: Central Pennsyltucky...
Posts: 1,012
You may want to use some layout dye( or a sharpie) and mark the lugs on the barrel. Assemble and rack the slide a few times. Should give you a good indication of how they are engaging.
If in doubt, take it to a professional.
std7mag is offline  
Old August 21, 2017, 03:09 PM   #3
Don P
Senior Member
 
Join Date: December 17, 2005
Location: Florida
Posts: 5,666
Quote:
It looks like at least 75% as deep
Perhaps a longer link
__________________
NRA Life Member, NRA Range Safety Officer, NRA Certified Pistol Instructor,, USPSA NROI Range Officer,
ICORE Range Officer, ICORE Match Director
,MAG 40 Graduate
As you are, I once was, As I am, You will be.
Don P is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:02 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05697 seconds with 10 queries