The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting > Bullet Casting

Reply
 
Thread Tools Search this Thread
Old April 24, 2019, 08:48 PM   #1
Beagle333
Senior Member
 
Join Date: January 7, 2012
Location: Auburn, AL.
Posts: 2,299
The 41 Keith HP is here!!

It's here, it's here!! I've been wanting one of these for quite a while. I have the solid version and have wanted the HP version but it has been sold out for a long time. So I called up NOE directly and explained what I wanted and that it hasn't been in stock for a long time, and while I was on the phone with him, he went and pulled the tooling and put it in the lineup and said "Check back in two weeks, it should be available then." So I waited and watched and checked back a few times and after about 3 weeks, there it was! He had three of them in stock now. Success!!! I can hardly wait for an opportunity to cast some of these beauties!





__________________
.
.
.
Have a Colt and a smile.
Beagle333 is offline  
Old April 26, 2019, 10:23 PM   #2
Old 454
Senior Member
 
Join Date: August 15, 2011
Location: Chesterton Ind.
Posts: 727
I really like NOE aluminium molds...

Very nice
Old 454 is offline  
Old May 10, 2019, 06:37 PM   #3
gwpercle
Senior Member
 
Join Date: November 30, 2012
Location: Baton Rouge, Louisiana
Posts: 961
That's a nice looking mould .

A while back I couldn't resist the temptation and ordered a Keith Signature Mould
412-237-SWC 3 cavity PB (Keith) . work of art.... I haven't used it yet , too pretty , so I ordered another 413-215-WC (413432) wadcutter 3 cavity in a group buy , this one I cast with. I have a model 58 S&W that I'm working up loads for and have high accuracy hopes for the wadcutter .

Give us a range report on the 412-237-SWC...I might have to get mine dirty !
Gary
gwpercle is offline  
Old May 11, 2019, 04:42 PM   #4
Beagle333
Senior Member
 
Join Date: January 7, 2012
Location: Auburn, AL.
Posts: 2,299
I still haven't tried it yet, I'm still testing the MP 41-265TS HP mold. And I'm loading up a bunch of 250gr WFNs that a buddy of mine gave me. But the 412-237 is next on the hot plate when the weather is nice. (storming here in lower AL today and Mother's day)
__________________
.
.
.
Have a Colt and a smile.
Beagle333 is offline  
Old May 12, 2019, 05:48 PM   #5
gwpercle
Senior Member
 
Join Date: November 30, 2012
Location: Baton Rouge, Louisiana
Posts: 961
Quote:
Originally Posted by Beagle333 View Post
I still haven't tried it yet, I'm still testing the MP 41-265TS HP mold. And I'm loading up a bunch of 250gr WFNs that a buddy of mine gave me. But the 412-237 is next on the hot plate when the weather is nice. (storming here in lower AL today and Mother's day)
Hitting our like button... LIKE LIKE LIKE !!!
Gary
gwpercle is offline  
Old May 20, 2019, 08:04 PM   #6
Beagle333
Senior Member
 
Join Date: January 7, 2012
Location: Auburn, AL.
Posts: 2,299
I still haven't cast with it. I haven't cast anything in a couple of weeks. I've been loading a lot, as I had gotten way behind in that. I'm not even sure when I'll get to cast again. It's supposed to set records for heat here this weekend and the 15-day forecast shows it staying near the triple digit mark at least that long. My ol' tin casting shed will be turned into a convection oven!
__________________
.
.
.
Have a Colt and a smile.
Beagle333 is offline  
Old May 21, 2019, 06:57 AM   #7
Mike / Tx
Senior Member
 
Join Date: April 8, 2000
Posts: 1,915
[QUOTE]My ol' tin casting shed will be turned into a convection oven!/QUOTE]

Time to powder coat.....
__________________
LAter,
Mike / TX
Mike / Tx is offline  
Old May 22, 2019, 06:18 PM   #8
gwpercle
Senior Member
 
Join Date: November 30, 2012
Location: Baton Rouge, Louisiana
Posts: 961
June,July and August
A tin shed in Auburn , AL.
HOT! HOT! HOT!
gwpercle is offline  
Old May 23, 2019, 08:54 AM   #9
Beagle333
Senior Member
 
Join Date: January 7, 2012
Location: Auburn, AL.
Posts: 2,299
Sadly, my hot tin casting shed is also my hot tin powdercoating shed. (because that's where the compressor and oven are kept.)

__________________
.
.
.
Have a Colt and a smile.
Beagle333 is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:42 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05377 seconds with 9 queries