Remington 1100 rear trigger plate pin falls out

Dave686 · March 4, 2006, 02:06 PM

My brother-in-law has a Remington 1100 that the rear trigger plate pin will just fall out. I haven’t taken it apart yet, but can someone tell me what holds that pin in?

BUCKMARK · March 4, 2006, 02:48 PM

Remove both front and rear pins and drop the trigger assy. from the receiver with the bolt in the forward position.

Look at the inside of the trigger assy. You will see a bushing for each pin front and rear. There will also be a detent spring on each bushing. This spring is shaped like the letter "D". That detent spring is prolly' not on the rear bushing.

Brownells sells them, and they are very simple to install.

BUCKMARK · March 4, 2006, 02:50 PM

http://www.brownells.com/aspx/NS/sto...&s=27230#27230

There ya go sir.

$4.60 and fixed.

Ruger4570 · March 4, 2006, 09:40 PM

Buckmark hit it, I had the same problem at one time and it was an easy fix,, cheap too.. good luck

March 4, 2006, 02:06 PM	#1
Dave686 Member Join Date: September 22, 2005 Location: Tennessee Posts: 48	Remington 1100 rear trigger plate pin falls out My brother-in-law has a Remington 1100 that the rear trigger plate pin will just fall out. I haven’t taken it apart yet, but can someone tell me what holds that pin in?

March 4, 2006, 02:50 PM	#3
BUCKMARK Senior Member Join Date: July 19, 2004 Location: south central Pa. Posts: 299	http://www.brownells.com/aspx/NS/sto...&s=27230#27230 There ya go sir. $4.60 and fixed. __________________ NRA-GOA Let's Roll!

March 4, 2006, 02:48 PM	#2
BUCKMARK Senior Member Join Date: July 19, 2004 Location: south central Pa. Posts: 299	Remove both front and rear pins and drop the trigger assy. from the receiver with the bolt in the forward position. Look at the inside of the trigger assy. You will see a bushing for each pin front and rear. There will also be a detent spring on each bushing. This spring is shaped like the letter "D". That detent spring is prolly' not on the rear bushing. Brownells sells them, and they are very simple to install. __________________ NRA-GOA Let's Roll!

March 4, 2006, 09:40 PM	#4
Ruger4570 Senior Member Join Date: April 3, 2005 Location: Rochester, New York Posts: 2,136	Buckmark hit it, I had the same problem at one time and it was an easy fix,, cheap too.. good luck