|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
April 5, 2020, 08:24 AM | #1 |
Senior Member
Join Date: November 26, 1999
Location: BLUEGRASS STATE KY USA
Posts: 1,780
|
Issues with Steel Case 7.62x39 AR
I had several rounds yesterday not go off in my newly build 7,62x39 AR.
AR-Stoner upper with standard parts kit in a lower. Had 5 rounds not go off out of 30 today. Looks like it is getting good contact with the primers. Rifle worked well other than a few rounds not going boom. Thoughts? Upgrade hammer spring which one to buy? Should I just chalk up to crap ammo?
__________________
NRA LIFE MEMBER Last edited by Logs; April 5, 2020 at 08:33 AM. |
April 5, 2020, 10:47 AM | #2 |
Senior Member
Join Date: September 7, 2009
Location: N. Dakota
Posts: 435
|
Could try an extra power hammer spring, or I would try first an "enhanced" firing pin.
__________________
We've all heard that a million monkeys banging on a million typewriters will eventually reproduce the entire works of Shakespeare. Now, thanks to the Internet, we know this is not true. Last edited by Nodak1858; April 5, 2020 at 11:14 AM. |
April 5, 2020, 01:33 PM | #3 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,841
|
It go bang with brass?
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
April 5, 2020, 02:57 PM | #4 |
Senior Member
Join Date: November 26, 1999
Location: BLUEGRASS STATE KY USA
Posts: 1,780
|
Don't have any brass ammo in 7.62x39. 25 rounds did go bang out of the mag only 5 didn't. Tried to recycle two of them and still no go.
__________________
NRA LIFE MEMBER |
April 5, 2020, 03:26 PM | #5 |
Senior Member
Join Date: April 28, 2001
Location: CA
Posts: 1,768
|
Russian ammo has very hard primers meant for full auto LMG fire. Mini 30s will do the same thing with steel cased ammo. Unfortunately, you need an AK or SKS to really have good reliability in most cases with com block ammo.
|
April 5, 2020, 05:30 PM | #6 |
Senior Member
Join Date: October 19, 2005
Location: Tx Panhandle Territory
Posts: 4,160
|
I agree with Nodak- first, try an enhanced firing pin, and then an extra power hammer spring.
You mentioned "standard LPK" up there. Is the hammer the larger full mass ones, or one of the lighter and smaller hammers? You can tell by google image searching which is which. If it's a smaller speed style hammer, it may be lacking mass for proper whackage on the firing pin.
__________________
Rednecks... Keeping the woods critter-free since March 2, 1836. (TX Independence Day) I suspect a thing or two... because I've seen a thing or two. |
April 5, 2020, 06:05 PM | #7 |
Senior Member
Join Date: September 7, 2009
Location: N. Dakota
Posts: 435
|
For the most part to get sure fire on steel case Russian ammo you'll have a compromise of decent trigger pull and sure fire when pulling the trigger. A heavy hammer spring will help, but you'll end up with a heavier trigger pull. If it were me I'd get one of the nickle coated trigger sets from Right To Bear and a standard weight spring set. Then add the 7.62x39 enhanced firing pin. The RTB trigger is cheap but pretty nice compared to milspec. If that doesn't help go to the heavy spring set. I did this on the few 7.62x39 uppers I have and I have no more issues with any ammo.
__________________
We've all heard that a million monkeys banging on a million typewriters will eventually reproduce the entire works of Shakespeare. Now, thanks to the Internet, we know this is not true. |
April 5, 2020, 06:50 PM | #8 |
Senior Member
Join Date: November 26, 1999
Location: BLUEGRASS STATE KY USA
Posts: 1,780
|
Thanks. I looked at RTB and both trigger and firing pins are out of stock. I'll keep watching.
https://www.righttobear.com/7-62x39-...Pin-p/ehfp.htm
__________________
NRA LIFE MEMBER |
April 6, 2020, 08:49 AM | #9 |
Senior Member
Join Date: November 26, 1999
Location: BLUEGRASS STATE KY USA
Posts: 1,780
|
Found an enhanced firing pin and spring. Will try the pin first to see if that helps. Thank You.
__________________
NRA LIFE MEMBER |
April 7, 2020, 12:06 PM | #10 |
Senior Member
Join Date: November 15, 2014
Posts: 163
|
I have the same ARStoner upper from MidwayUSA. I have only shot 1966 dated, steel cased, communist surplus ammo in it so far and it always fires just fine. In the next week I will try firing Golden Tiger steel in it.
I have a BearCreek Arsenal upper in 7.62x39 and it eats the Golden Tiger steel with no problems too. What brand of steel ammo are you having the problem with?
__________________
Keep your guns clean.... the kids may put them in their mouths! |
April 7, 2020, 02:25 PM | #11 |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,846
|
If the primer strikes on the rounds that did not fire are the same as those on the ones that did (location, depth, etc) then I would blame the ammo, not the gun.
Do get some brass ammo as a control group, at least. Powering up the firing pin strike for the combloc ammo might be needed, but you don't want to take it to the point it pierces primers on other stuff.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
April 7, 2020, 03:45 PM | #12 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Check to make sure your AR is going into battery all the way. Light strikes like shown are often indicative of not going into battery. Probably ammo-related (dimensions).
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
April 8, 2020, 09:41 PM | #13 |
Senior Member
Join Date: September 15, 2005
Location: Oregon
Posts: 1,033
|
Fairly common issue with the X39 AR (AR47?) Midway even mentions (or at least used to) that it is common to have trouble with steel case mil-spec ammo. I 'enhanced' my own, it wasn't a spring issue but the firing pin needed to be able to reach just a tiny bit deeper. That said I would also not use anything but a standard hammer spring either, but its been 100% for a few thousand rounds of Wolf/Tula/Red Army fodder since the modification.
|
|
|