The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old September 6, 2012, 09:56 AM   #1
Magnum Wheel Man
Senior Member
 
Join Date: July 26, 2006
Location: Southern Minnesota
Posts: 9,333
So where is the 327 today??? ( I know, it's a beaten horse )

I load my own, & had already made a pretty big investment in 32 H&R revolvers ( I think 3 are enough, not counting my dozens of 32 S&W short & long antique revolvers ), so I never had a dog in that fight...

But while flipping through the Midway on line clearance page, I see that CorBon 327 ammo is on clearance... so I'm assuming that ammo has caught up with demand ???

the guys that bought guns, still like it ??? I love shooting my old 32's, have a J Frame I still buy H&R ammo for carrying, & I set my wife up to shoot 32 H&R in CAS with a matching pair of vintage stainless Rugers... so we like the bore, but I still don't see the need to go out & buy a 327, when I have plenty of other 32's, but if I didn't have my H&R chambered J frame, I think I would buy a 327 snubbie for CCW
__________________
In life you either make dust or eat dust...
Magnum Wheel Man is offline  
Old September 6, 2012, 11:44 AM   #2
gak
Senior Member
 
Join Date: February 28, 2005
Location: Aridzona
Posts: 2,767
I too am a big .32 H&R fan--since Ruger's (and my) first in 1984. Haven't bit on the .327 yet, but only $ are holding me back at this point, possibly converting one of my .32 Single Sixes first though the SP101 and Smith calls as well. I think you haven't heard a lot lately here as a few megathreads this past year did quite a number on the subject - pro and con. Check them out.
gak is offline  
Old September 6, 2012, 12:31 PM   #3
hulley
Senior Member
 
Join Date: November 9, 2008
Location: Hoschton, Ga.
Posts: 726
I'm really wanting a .327 Sp101 but there is a SP101 snub in .357 in my immediate future seeing as I started reloading for that round. However I am going to go ahead and get dies and components for the .327 so I wont have an excuse to not get one.
__________________
Nov 2, 2011 sent form 4, SS Sparrow. Arrived May 29, 2012.
Jan 30, 2012 sent form 1 for SBR. Arrived July 12, 2012
Jan 22, 2013 Sent form 4, 762-SDN-6. Arrived Sept 13, 2013
hulley is offline  
Old September 6, 2012, 03:40 PM   #4
magmax
Member
 
Join Date: July 17, 2012
Posts: 51
After being on a waiting list, I just got a call from StarLine Brass yesterday, asking if I still wanted the .327 brass shipment. My response-I SURE DO.
Pictured is my S&W 632 in .327 magnum which I like alot although at times I think about having that expansion chamber cut off the end of the barrel. American Eagle .327 magnum 100gr. clocks at 1430 fps out of the 3" barrel
David

magmax is offline  
Old September 6, 2012, 03:43 PM   #5
Micahweeks
Senior Member
 
Join Date: February 21, 2009
Location: North Mississippi
Posts: 854
I was just searching on this very topic yesterday. I just recently shot a .327 SP101 and really liked the feel of it. If ammo is available in my area, I very well may pick up the new 4.2 inch SP101 in .327.
Micahweeks is offline  
Old September 6, 2012, 09:07 PM   #6
Micahweeks
Senior Member
 
Join Date: February 21, 2009
Location: North Mississippi
Posts: 854
So, I went to check on a 4.2 inch SP101 in .327, and there isn't one. Sigh. Come on, Ruger! I want one!
Micahweeks is offline  
Old September 6, 2012, 09:13 PM   #7
Billy Shears
Senior Member
 
Join Date: January 17, 2011
Posts: 606
I've put over 700 rounds of .327 ammo through my little SP-101 this summer. Nearly all handloads. To be honest, while I'm sure it's perfectly capable, I didn't buy this revolver for self-defense purposes. Instead, I bought it because a) it's fun and accurate to shoot, b) it's cheap to reload and c) I really get tired of chasing brass all over the range.

Revolver's may be old fashioned in some folks's opinions, but in many ways they make for a very good training day at the range. Less time digging for brass equals more time working on sight picture and trigger control.

I have a load of brass in the tumbler right now.

Last edited by Billy Shears; September 9, 2012 at 11:12 AM.
Billy Shears is offline  
Old September 6, 2012, 09:35 PM   #8
ThomasT
Senior Member
 
Join Date: January 22, 2009
Location: Texas
Posts: 2,753
I like anything that promotes more 32 caliber shooting and more new componats. I have 4 32 mags including my holy grail gun, a 631 with a 4" barrel. I even got it at a decent price. (if $670 is a decent price). I also have 3 32 long S&W revolvers plus a Marlin 1894 in 32 mag.

I rarely load full power loads so a 327 doesn't seem to be needed for me. But for you guys who are sold on them all I can say is enjoy a cool little gun.

One of my 32 mags is an S&W model 431PD snubby. It weighs 15oz loaded. It stays in my night stand loaded with 85gr Hornady hollow points and is perfect for checking that strange noise you heard outside with no one knowing you are armed. What a neat little gun.
ThomasT is offline  
Old September 6, 2012, 10:43 PM   #9
magmax
Member
 
Join Date: July 17, 2012
Posts: 51
I would say the .32's and .45's are my favorite calibres. This S&W 332 Ti in .32 H&R mag has been my constant companion for the last 13 years. Buffalo Bore has a 100gr JHP +P load that clocks 1030fps out of that short barrel. Hold 6 rounds and weighs next to nothing.
David

magmax is offline  
Old September 7, 2012, 05:41 AM   #10
Kreyzhorse
Senior Member
 
Join Date: April 12, 2006
Location: NKY
Posts: 12,463
Quote:
...I see that CorBon 327 ammo is on clearance... so I'm assuming that ammo has caught up with demand ???
I think it is likely that demand has actually caught up with the ammo.... which speaks as to why it is on clearance.

I'm sure the .327 is a great round but it never really had much of a chance for a lot of various reasons.
__________________
"He who laughs last, laughs dead." Homer Simpson
Kreyzhorse is offline  
Old September 7, 2012, 05:45 PM   #11
FrankenMauser
Senior Member
 
Join Date: August 25, 2008
Location: In the valley above the plain
Posts: 13,424
I haven't done much shooting this year, but I try to make sure at least one .327 goes on each trip.

I still like it, and plan to keep both revolvers indefinitely.
The Blackhawk came first, and is a lot of fun.
The GP100 came second, is a lot of fun, and is much more 'utilitarian'.

The GP100 routinely finds itself on nightstand duty, loaded with factory Speer 115 gr Gold Dots. (Frequently out-performs even .357 mag in expansion AND penetration in ballistic gelatin.)

Except for 9mm and .233 Rem, I have more brass for my .327s, than any other cartridge(s) I reload. I thoroughly enjoy shooting them, even if I go "light" for the day and only use .32 S&W Long or .32 H&R.

I haven't spent much time in gun shops, this year, either. But, last time I asked around, .327s were still selling very well. The only thing really holding it back in my area, is that some of the shops are still refusing to sell .327 ammo. (They'll sell all the .327 firearms they can get their hands on, but won't sell the ammo because there isn't room for as much mark-up as there is with common cartridges like 9mm, .45 Auto, and .357 Mag.... )


Some people think the .327 never had a future.
Some people think the .327 is now dying.
All I know, is that mine are just getting started.


Old, crappy photo, and they were both dirty.
__________________
Don't even try it. It's even worse than the internet would lead you to believe.

Last edited by FrankenMauser; September 7, 2012 at 05:58 PM.
FrankenMauser is offline  
Old September 8, 2012, 10:30 PM   #12
Colorado Redneck
Senior Member
 
Join Date: January 6, 2008
Location: Northeast Colorado
Posts: 1,993
Self Defense with 327 Fed Mag

If a .380, 38 special, 9 mm are good for self defense, the .327 Fed Mag should be as well. Personally, if that need ever arose, the Speer 115 gr gold dot ammo would be a good choice, and in my opinion would be every bit as capable as the calibers I listed.

The SP101 is a pleasure to shoot. Hate the front sight, but that problem can be fixed. Some folks don't llike new fangled things. I do.
Colorado Redneck is offline  
Old September 9, 2012, 11:03 AM   #13
L_Killkenny
Senior Member
 
Join Date: February 2, 2007
Location: Iowa
Posts: 2,676
Why is it some shooters insist on deeming cartridges a failure if it doesn't supplant existing cartridges in popularity? I saw the same thing when the .204 Ruger came out. Shooters didn't rush out and replace their .22-250's and .223's with em so some instantly touted how the round would be gone in short order. Guess they were wrong even though to this day the .204 doesn't surpass the sales of it's competition. .327, same deal. It's not gonna un-seat the .38/.357. It may never even get 10% of the market. Does that mean it's a failure and to be banished to the depths of the ocean? Not.
L_Killkenny is offline  
Old September 10, 2012, 04:52 PM   #14
JohnMoses
Senior Member
 
Join Date: April 11, 2008
Posts: 197
Add to the 327's versitility is the fact it will chamber & fire the 32 acp. I've never bothered with ball ammo, but I have a full case of 32 plastic training ammo that is a pita to shoot in an auto, but real fun in the revolver. ( the girls love it). A 6 grain bullet @1000 fps will ventilate a beverage container.
JohnMoses is offline  
Old September 10, 2012, 09:13 PM   #15
Billy Shears
Senior Member
 
Join Date: January 17, 2011
Posts: 606
Quote:
The GP100 routinely finds itself on nightstand duty, loaded with factory Speer 115 gr Gold Dots.
How do you like that load? Seems like a very reasonable choice...kind of a 9mm +P+ energy-wise, but I'm curious as to how it shoots.

The American Eagle 100 grain soft points @ 1500 fps show real promise on paper, but are the loudest, most obnoxious sounding high-pitched, ear-ringing catridges I've ever fired in any handgun, even exceeding the hot 125s I sometimes shoot out of my 357s. I only shoot the AE100s to "harvest" the brass and would never want to touch off one of those little monsters indoors in the middle of the night.
Billy Shears is offline  
Old September 11, 2012, 11:14 PM   #16
FrankenMauser
Senior Member
 
Join Date: August 25, 2008
Location: In the valley above the plain
Posts: 13,424
threedogdad, I only keep factory ammo on hand for hunting situations where I may need to prove that the particular load meets energy requirements, and for HD/SD.
So... I tend to go for good SD stuff, and the highest energy numbers I can find.

The 115 gr Gold Dot load is kind of a mediocre-looking load, on paper. But, in ballistics gelatin, it performs very well. (As I said... it's usually better than some of the best .357 Mag loads.)

It's plenty accurate and doesn't have the bark or bite of some other loads.
In the Blackhawk, it runs something like 1,430 fps. So, it shouldn't be running much less than about 1,375 fps in the GP100.


As for the 100 gr AE... I love it. It has some bark, but I still think equivalent .357 Mag loads are worse - even out of longer barrels.
Out of my Blackhawk, the 100 gr AE load runs right around 1,680 fps. (Up to 1,725 fps, on really hot days.) I don't think I've chronographed it in the GP100, yet.
I hate buying factory ammo, so I shoot the 100 gr AE load sparingly. But, I do like it; and need to pick up another box or two.

Like you, I wouldn't want to shoot it indoors.... but I'd prefer it over certain "full house" .357 loads.
__________________
Don't even try it. It's even worse than the internet would lead you to believe.
FrankenMauser is offline  
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:24 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.09005 seconds with 10 queries