Recommend a source for S&W barrels ..

jrothWA · February 14, 2017, 11:11 PM

for M15-3 revolver?

Will later "-numbers barrels fit the -3 marked frame?

Thanks.

1911_Hardball · February 18, 2017, 04:29 PM

I would start here.

Sgt127 · February 20, 2017, 02:26 AM

I actually have a 4" model 15 barrel. Not sure on the dash. Buddy built a PPC gun. If you're interested, I'll dig it out.

Several on eBay.

http://m.ebay.com/sch/i.html?_from=R...odel+15+barrel

laytonj1 · February 20, 2017, 04:46 PM

Pre 15 to 15-4 uses a pinned barrel. 15-5 went to the non pinned barrels.

Jim

bedbugbilly · February 20, 2017, 11:45 PM

ebay

GunBroker

Smith & Wesson Forum

jrothWA · March 4, 2017, 08:00 PM

to member here for 15 barrel, expect by Thursday nest week and getting the M15 operatiioal.

THANKS for all responses!

HighValleyRanch · March 4, 2017, 09:12 PM

Are you changing the barrel yourself?

jrothWA · March 10, 2017, 03:56 PM

at the smith. He reviewed it and was "AWE-STRUCK" with the condition. TUrned to me and state: "Ready next week, Joe".

Also added a "WEGONNS" rear sight blade for a crisper sight picture.

Can't WAIT!

May leave the reblue till LAATER.

Thanks for assistance.

Pathfinder45 · March 11, 2017, 09:40 PM

Probably an ignorant question, but: Can't you just send it to Smith and Wesson to install a replacement?

February 14, 2017, 11:11 PM	#1
jrothWA Senior Member Join Date: November 11, 2006 Posts: 2,519	Recommend a source for S&W barrels .. for M15-3 revolver? Will later "-numbers barrels fit the -3 marked frame? Thanks.

February 18, 2017, 04:29 PM	#2
1911_Hardball Senior Member Join Date: September 25, 2009 Location: SD Posts: 198	I would start here. __________________ Shot placement is King, penetration is Queen. Everything else is faeries dancing on the heads of pins.

February 20, 2017, 11:45 PM	#5
bedbugbilly Senior Member Join Date: November 19, 2009 Posts: 3,287	ebay GunBroker Smith & Wesson Forum __________________ If a pair of '51 Navies were good enough for Billy Hickok, then a single Navy on my right hip is good enough for me . . . besides . . . I'm probably only half as good as he was anyways. Hiram's Rangers Badge #63

March 4, 2017, 08:00 PM	#6
jrothWA Senior Member Join Date: November 11, 2006 Posts: 2,519	Just mailed a money order .. to member here for 15 barrel, expect by Thursday nest week and getting the M15 operatiioal. THANKS for all responses!

March 4, 2017, 09:12 PM	#7
HighValleyRanch Senior Member Join Date: July 15, 2005 Posts: 4,065	Are you changing the barrel yourself? __________________ From the sweet grass to the slaughter house; From birth until death; We travel between these two eternities........from 'Broken Trail"

February 20, 2017, 02:26 AM	#3
Sgt127 Senior Member Join Date: May 13, 2002 Posts: 1,053	I actually have a 4" model 15 barrel. Not sure on the dash. Buddy built a PPC gun. If you're interested, I'll dig it out. Several on eBay. http://m.ebay.com/sch/i.html?_from=R...odel+15+barrel

February 20, 2017, 04:46 PM	#4
laytonj1 Senior Member Join Date: June 1, 2005 Posts: 4,443	Pre 15 to 15-4 uses a pinned barrel. 15-5 went to the non pinned barrels. Jim

March 10, 2017, 03:56 PM	#8
jrothWA Senior Member Join Date: November 11, 2006 Posts: 2,519	just returned form dropping the replacement barrel... at the smith. He reviewed it and was "AWE-STRUCK" with the condition. TUrned to me and state: "Ready next week, Joe". Also added a "WEGONNS" rear sight blade for a crisper sight picture. Can't WAIT! May leave the reblue till LAATER. Thanks for assistance.

March 11, 2017, 09:40 PM	#9
Pathfinder45 Senior Member Join Date: January 7, 2008 Posts: 3,224	Probably an ignorant question, but: Can't you just send it to Smith and Wesson to install a replacement?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search