|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
December 14, 2012, 04:45 PM | #1 |
Junior Member
Join Date: December 13, 2012
Posts: 6
|
Dueling/Target pistol help
I was wondering if you guys could recommend some quality manufacturers of these type of guns.
So far I've only looked at Pedersoli, and like their le page and continental models. are there differences in accuracy or reliability between the two? also, advice on whether flintlock or percussion is preferable for these types of guns would be appreciated. Last edited by The Reaver; December 14, 2012 at 07:56 PM. |
December 14, 2012, 07:54 PM | #2 |
Senior Member
Join Date: May 16, 2005
Location: E Tennessee
Posts: 828
|
http://www.thegunworks.com/custprodg...Cat2Option=yes
They make a flint version also. Flint vs percussion- With good quality, properly tuned guns, they should shoot equally well, but a caplock is probably more trouble free. You have to keep a sharp flint and properly position it for reliable, fast ignition on a rock lock. An improperly hardened frizzen causes problems as well. Last edited by JN01; December 16, 2012 at 03:50 PM. |
December 15, 2012, 10:20 AM | #3 |
Senior Member
Join Date: September 19, 2008
Posts: 4,678
|
I would advise looking for a T/C Patriot ( or two )- The one's I've had were all very accurate.
. |
December 15, 2012, 11:58 PM | #4 |
Junior Member
Join Date: December 13, 2012
Posts: 6
|
That is a pretty nice gun!I just prefer the lines of the dueling pistols not including attached ramrods for aesthetic reasons. The le page and continental just seem the most affordable, and I'm trying to figure out what the substantial differences are, or if there's better options available.
|
December 16, 2012, 03:51 PM | #5 |
Senior Member
Join Date: May 16, 2005
Location: E Tennessee
Posts: 828
|
Fixed the link on my previous post so it goes directly to the pistol.
|
December 17, 2012, 07:13 PM | #6 |
Junior Member
Join Date: December 13, 2012
Posts: 6
|
Are you two guys the only ones on the board with experience or interest in this class of firearm? I'm kind of surprised.
|
December 17, 2012, 07:51 PM | #7 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,841
|
Stay away from Traditions' Trapper. It doesn't look right (too much wood between the trigger guard and the bottom of the lockplate) and quality is not there. I had to ream out the ramrod hole lower so the ramrod would go in. Thanks to the ramrod retaining spring, I can't get the ramrod out of the gun and that means you can't take the gun apart. Right now I have it assembled and am hoping the spring will wear out so it will be easier.
Other folks had to retime their drum on a lathe (the nipple was at the wrong angle) and a classmate had to bend the hammer so it would strike the nipple. The wood itself is a mystery wood and is soft for a hardwood. That means it won't cut easily.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
December 18, 2012, 04:22 AM | #8 | |
Senior Member
Join Date: March 15, 2005
Location: Central Connecticut
Posts: 3,166
|
Quote:
AFAIK Pedersoli is one of the largest, best and only current manufacturer of the target models that you're asking about that are being imported into the U.S. and which are most readily available. Perhaps a Blue Book of Long Arms & Pistols would provide you with some information about more models that I don't enough about and wouldn't know where to buy them if I did. http://bluebookofgunvalues.com/Produ...ts.aspx?id=105 An older but still useful 2nd edition of The Blue Book of Modern Black Powder Values: Second Edition from 2002 can be found used on Amazon for as low as $12.17: http://www.amazon.com/Blue-Modern-Bl.../dp/1886768323 I recall reading that the Le Page is an extremely accurate pistol, but I've never heard of the Continental. I think that many shooter's prefer a certain caliber, as well as the lock style. In the hands of a well-practiced shooter, I don't know why one model or lock style would be any more or less accurate than another. I suppose that the faster lock time of a percussion gun would be a benefit. But I'm reasonably sure that's not always the case. Depending on the type of competition, flint and percussion pistols may not even be shooting in the same matches. There are probably more production models available in Europe if you find a model that you really like that's not available in the U.S. or no longer made. Otherwise many target pistols could be custom or semi-custom designs that are made to order by any number of gun making outfits and/or individual builders. Sometimes there are uncommon used models available that can be found by scouring the gun auction sites, which the importers of are not identifiable. That's because individuals can import them from Europe on their own without needing any special import license. How much are you looking to spend? What's the purpose, for local club matches, for more advanced NMLRA competition, or mostly for personal recreation & enjoyment? Last edited by arcticap; December 18, 2012 at 05:09 AM. |
|
December 18, 2012, 05:22 AM | #9 |
Junior Member
Join Date: December 13, 2012
Posts: 6
|
Ideally, I'd prefer to keep this at $1000 or below.
|
December 18, 2012, 09:17 AM | #10 |
Senior Member
Join Date: March 15, 2005
Location: Central Connecticut
Posts: 3,166
|
I found a product page for an Armisport Le Page .45 percussion pistol that appears to be distributed by Chiappa Firearms of Dayton, Ohio..
It comes in a premium set, a cased set, by itself, with a 4.5mm practice barrel or as a target model with a small rear adjustable target sight. Here's the product page: http://www.chiappafirearms.com/products/89 And here's a 53 second video showing much of its detail from different angles: http://www.youtube.com/watch?v=JYOs5RaeJcQ |
December 18, 2012, 09:41 AM | #11 |
Junior Member
Join Date: December 13, 2012
Posts: 6
|
That has to be one of the most beautiful guns I've ever seen. any idea where it's sold?
|
December 18, 2012, 10:35 AM | #12 |
Senior Member
Join Date: March 15, 2005
Location: Central Connecticut
Posts: 3,166
|
Call Taylor's Firearms.
It looks like they might have it for $873.00. They have a product page set up for it. And they're a distributor. For customer service and to order. 540.722.2017 Home page: http://www.taylorsfirearms.com/ Le Page product page: http://www.taylorsfirearms.com/napol...ge-pistol.html If they don't have it then call Dixie Gun Works, they're also a distributor: 800-238-6785 http://dixiegun.com/ Last edited by arcticap; December 18, 2012 at 10:45 AM. |
December 19, 2012, 08:49 PM | #13 |
Junior Member
Join Date: December 13, 2012
Posts: 6
|
oh, in reply to your earlier question, this is mainly for personal enjoyment. I just enjoy having weapons be both good looking and functional as possible.
|
|
|