November 16, 2012, 11:51 AM | #1 |
Senior Member
Join Date: January 10, 2012
Posts: 3,881
|
digital powder scale ?
How many of you guys use a digital powder scale ? Which one do you recommend ?
I have a Frankford Arsenal one from Midway that I bought on sale for 19.99, it has worked good until recently it needs to be re calibrated almost every time I go to use it. I am looking for something a little more reliable without spending a small fortune. |
November 16, 2012, 01:07 PM | #2 |
Senior Member
Join Date: January 6, 2011
Location: Thornton, Texas
Posts: 3,998
|
I have two of them. One is a basic PACT electronic scale that just weighs. The other is a Lyman that throws the charge and trickles to the desired weight. I load using the Lyman and periodically check the Lyman with the PACT and with test weights. I started out years ago with an RCBS 1010, but when I started weighing cases I switched to the PACT for weighing charges also. Then I was lusting after one of the do-it-all scales from RCBS, Lyman, or Hornady. The Lyman was on sale for the lowest price and I went with that. It was a great decision. Much faster than either the 1010 or the PACT. But if you don't want to spend money on the do-it-all machine, I'm sure most any of the RCBS, Lyman, or Hornady basic electronic scales would do just fine.
|
November 16, 2012, 05:48 PM | #3 |
Senior Member
Join Date: January 9, 2007
Posts: 447
|
If your Frankford scale uses a battery, then it will always be susceptible to drift as the battery loses power, which is constantly. I had something like that for a while and it was good if the battery was fresh.
I replaced it with a RCBS Rangemaster 750 and it's been a great scale. |
November 16, 2012, 05:57 PM | #4 |
Senior Member
Join Date: March 15, 2011
Location: Salt Lake City, UT
Posts: 421
|
I have the Rangemaster 750 too. It's much better than the balance beam scale it replaced that came with my reloading kit. I leave it plugged in and on all the time and it doesn't lose its zero. And it says RCBS on it so I know I'm covered if anything goes wrong with it.
|
November 16, 2012, 06:07 PM | #5 |
Senior Member
Join Date: September 9, 2008
Location: Woooooshington
Posts: 1,797
|
For years I used a Dillon D-Terminator scale, which is very nice and accurate to 0.1 grain. 2 years ago I found a smokin' deal on a Denver Instrument MXX-123 for $195. It's rated to 0.02 grain... which means it's insanely sensitive, so you need to use it where there are no drafts.
I use the Dillon for most things, and the DI MXX when I'm feeling particularly fanatical.
__________________
Shoulder Drive Nicholson Club |
November 16, 2012, 07:04 PM | #6 |
Senior Member
Join Date: February 23, 2005
Posts: 13,195
|
+1 on Creepers comments ....those are the 2 scales I use as well.
I keep the Denver Instruments inside a box - that I made for it - with a lid ....it helps with any air movement issues around it. |
November 16, 2012, 07:15 PM | #7 | |
Senior Member
Join Date: September 9, 2008
Location: Woooooshington
Posts: 1,797
|
Quote:
"in a environmentally stabilized munitions room - in the bombproof basement - in my subterranean weapons lair... in the desert - on another planet - with armed high security droids".
__________________
Shoulder Drive Nicholson Club |
|
November 16, 2012, 07:27 PM | #8 |
Senior Member
Join Date: February 23, 2005
Posts: 13,195
|
Does it matter that the box is all dovetailed...and made from Cherry...does that make it ok .....
.....and the lid fits - firmly --- and keeps it safe, and sawdust, etc out of it ( my shop ....doubles as my reloading area / as well as my woodworking woodshop ).... |
November 16, 2012, 07:47 PM | #9 | |
Senior Member
Join Date: September 9, 2008
Location: Woooooshington
Posts: 1,797
|
Quote:
__________________
Shoulder Drive Nicholson Club |
|
November 16, 2012, 07:49 PM | #10 |
Senior Member
Join Date: February 23, 2005
Posts: 13,195
|
Ok,,,,,,,Ok .....
.....geeze, now I know what I look like in the morning looking for coffee..... |
November 16, 2012, 09:07 PM | #11 |
Senior Member
Join Date: November 14, 2011
Posts: 524
|
Jus keep fresh batteries. My FA scale does good for a long time and I can tell almost immediately when the batteries need replacing.
Look @ Gem Pro 250. Have not seen any bad reviews and the thing looks great and has great features for the small price tag. I will be picking up one for Christmas for myself. |
November 16, 2012, 11:50 PM | #12 |
Senior Member
Join Date: December 3, 2011
Posts: 558
|
As always when these threads come up, I vote for the Gemini 20, available through Amazon for under $25. It measures to .02grains and repeats consistently and accurately. Good enough for me.
|
November 17, 2012, 12:13 PM | #13 |
Senior Member
Join Date: February 23, 2005
Posts: 13,195
|
Just be cautious on selecting a scale that will only read to 0.2 / most of them are plus or minus 0.1 ( so its kind of the same thing ) unless you meant + or - 0.2 which would be a lot.....
There are a lot of handgun recipes ...where the Minimum and Maximum are only 0.4 grain apart.... that's why I like the Denver Instruments scale ...so you know exactly where you are ....while the PACT scales are quicker / they're less precice...and by the way, last I knew, most all of the big name electronic scales ( for Dillon, RCBS, etc ) were being made by PACT anyway..../ the Denver instruments scale will tell you to + or - 0.02gr ...../ making it nice to know when you're between 4.2 and 4.3 are you on the low side or the high side.... |
November 17, 2012, 12:23 PM | #14 | |
Senior Member
Join Date: December 3, 2011
Posts: 558
|
Quote:
|
|
November 17, 2012, 12:51 PM | #15 |
Senior Member
Join Date: January 3, 2008
Location: Central Oregon
Posts: 348
|
I have an RCBS 750 that I have had for nearly 5 years and have pretty much quit checking its accuracy against my 5-0-5 beam scale because it is never off . I havent even had to reset the zero. Point to note with a digital scale is not to use it when there is air moving in the house such as when the heater or ac is running and that they are setting on a very stable surface . RCBS has been phemominal in their customer service over the years for me and am confident should I ever start to have an issue with this unit they will take good care of me.
|
Thread Tools | Search this Thread |
|
|