The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Thread Tools Search this Thread
Old October 25, 2012, 05:42 PM   #1
Senior Member
Join Date: April 3, 2011
Location: to close to other houses
Posts: 1,176
Winchester 1400..thoughts?

Have a chance to buy a very nice (about 95%) Winchester 1400 semi-automatic 28" barreled 12ga. It is not the Ranger model, it's the little higher grade one with the nicer walnut stock and non-fixed choke vent rib barrel. Comes with chokes....$200.

Thoughts anyone? I've never had a Winchester shotgun of any kind, but my dad likes his 1300 Wild Turkey Federation model well enough. Any problems with this model? Price sound good for the condition? Wasn't really seriously looking for one, I'm just always scanning for good guns at a good price and just realized my safe is lacking a Auto-loading therefore I need one

Quick response would be helpful. The guy may meet me tonight.

Last edited by BerdanSS; October 25, 2012 at 09:24 PM.
BerdanSS is offline  
Old October 25, 2012, 05:50 PM   #2
Mike Irwin
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 40,026
The 1400s never had a very good reputation for durability. If you really want a used semi-auto, a Remington 1100 would be much preferable, or a Remington 58, or an 11-58.

I bought my Father a 58 years ago, and it came back to me when he died. I've had to replace some of the small parts (a spring and an extractor, but the great thing about that is that so many of the parts are interchangeable with Remington's models today.
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old October 25, 2012, 08:53 PM   #3
Senior Member
Join Date: April 3, 2011
Location: to close to other houses
Posts: 1,176
Well that's something good to know about the durability. I wonder if it's like a 4 out of 10 thing on the toughness scale, or just don't bang it on a fence post kind of deal. Odds are this Winchester wouldn't get much use other than screwing around with shooting clay's or maybe Waterfowl now and then. Just seems like a nice looking gun for $100 or so less than them seem to go for is GSs or gunbroker.

I really don't care for Remington (or the price of them). For a working gun my go to guy is my Mossy oak camo 835 ulti-mag. And for anything special it's Beretta. It's kinda the coke/Pepsi chevy/ford thing for me.

Shotgun: Mossberg
Truck: Dodge or GMC
And yes.... Pepsi or RC

I just don't get excited over the usual faves like Remington, Colt, S&W (or Chevy). I'm sure to get flamed for this..but hey, it's America.

Thanks for the insight though, I'll have to research some more. Don't want to end up with and egg. Being careful is one thing, but I don't want to have something that needs wrapped in bubble wrap to take it into the field. Or something really finicky about the old mossberg autoloaders.

picture of the culprit by the way.

After he sent the pic I quickly became aware that it does NOT have walnut stocks. Looks like Birch, maybe?

Last edited by BerdanSS; October 28, 2012 at 06:23 PM.
BerdanSS is offline  
Old October 25, 2012, 10:30 PM   #4
Senior Member
Join Date: February 11, 2012
Location: Williamsburg, Va.
Posts: 1,363
If you really want a gun that goes bang when you pull the trigger, I would get something else. There's a reason they are cheap. I am sure there is someone who has had one for 40 years and it has never blinked, but I have seen a heck of a lot of them with issues.
Virginian is offline  
Old October 25, 2012, 10:47 PM   #5
Senior Member
Join Date: April 3, 2011
Location: to close to other houses
Posts: 1,176
Any specific reason or issues? All of them I've seen for sale on gunbroker and the like have been anywhere from $350-$400, much older ones and some in poor condition. I thought $200 was pretty low for one in like new condition? Don't really want to drop $600 on another shotgun.
BerdanSS is offline  
Old October 25, 2012, 11:37 PM   #6
Join Date: March 16, 2010
Posts: 26
I had a 1400 some years ago and never had any trouble with it. Traded it for something I wanted more.

The only thing you might want to check on is availability of parts if/when something breaks. Not sure Winchester is making parts for it anymore, though used parts might be an option.
4570Tom is offline  
Old October 26, 2012, 05:05 PM   #7
Join Date: March 24, 2011
Location: Kalifornstan
Posts: 73
berdan, theres a few 1400's on GunAuction with prices higher than the s/g you are looking at. (starting $250 up to $400). Guns America 1400's between $250-$459. The price certainly looks good for a 95% s/g.
dwaawd is offline  
Old October 26, 2012, 08:11 PM   #8
Senior Member
Join Date: April 3, 2011
Location: to close to other houses
Posts: 1,176
Well, after a VERY disappointing venture for a wood and blued Mossy 835 this morning....I went and picked up the Winchester. Everything seems to be in good working order as far as I can tell. It is in good condition as promised (one very light 1" scratch in the left side of the stock and one little ding (less than half a centimeter long about the width of a medium sowing needle) on the left side of the receiver, opposite the ejection port...flawless otherwise. I guess I'll find out for sure tomorrow.

A buddy from work told me today that he bought one of these new in 1991 from Galyans. He loved his and said he didn't have one single problem out of it over years of medium to heavy use....after the factory damaged barrel was replaced free of charge. But his friend also bought one and I guess his was very problematic from day one. Just hope I got one of the good ones

MidwestGunWorks has Winchester factory rebuild kits for $29, thought about getting one or two to have on hand in case the ol' girl ever needs a tune up...since parts for these could completely dry up at any time. Mid west seems to be the only ones with any parts...unless someone knows of someplace else.

Last edited by BerdanSS; October 26, 2012 at 08:39 PM.
BerdanSS is offline  
Old October 28, 2012, 06:17 PM   #9
Senior Member
Join Date: April 3, 2011
Location: to close to other houses
Posts: 1,176
Well I took the Winchester out today. I had an ammo can full of everything from old S&B 00 Buck to light bird loads and high brass 4s along with a couple hand fulls of mixed slugs. I also brought several boxes of new Super X 4s and 6s and two boxes of Remington slugs. It ate the hell out of all of it without a single malfunction other than two of the 15 year old low recoil 00 rounds didn't have the guts to re-cock, but they did eject and load. Patterned well and grouped slugs about baseball size or smaller at 60 yards, dead on wind wise but shot the slugs about 5" high.

Overall I'm very pleased New pictures
BerdanSS is offline  
Old October 28, 2012, 07:39 PM   #10
Junior Member
Join Date: May 12, 2012
Posts: 11
i have a 1400 mk2.its a decent gun but only shoots high brass or slugs.doesnt like the cheap stuff at all!Has many new parts inside to try to remedy situation but to no avail.Good ammo or nothing for mine
ddgrego is offline  
Old October 30, 2012, 05:08 AM   #11
Senior Member
Join Date: April 16, 2009
Location: Fort Worth, Texas
Posts: 194
These gun do have walnut, just about the lowest grade available though. The Ranger series were meant to be an entry level model. I had one back in the late 1990s and it was a decent gun. It had a rifled barrel and the plain looking wood like yours, although yours does have some good colors to it. I painted it and chased hogs with it for a few yrs. It could he finicky if it wasn't cleaned often, monthly, but other than that it was a good gun.

Sent from my HTC Rezound using Tapatalk 2
Orphanedcowboy is offline  
Old October 30, 2012, 10:35 AM   #12
Senior Member
Join Date: April 3, 2011
Location: to close to other houses
Posts: 1,176
Over the last three days we've fired over 300 shells of varying age, brand and quality: from the cheapest of walmart bird loads to high quality high brass game loads and slugs....without a single hiccup (save for those two nasty old S&B 00). That was with a quick cleaning prior to the 300+ and no cleaning was done in between. A quick patch swab down the barrel, inside of the magazine tube and of the piston itself with CLP.

The young man I bough this from was a collage student that was a member of a private trap shooting team, and was wanting to step up to a "real" trap gun. It was VERY dirty on the inside and he said he had been shooting it since last year without (other than the barrel) cleaning it. I believe it's safe to say out of the sea of lemon 1400s...I've got a gem. No wear can be found on any of the internals.

The only part that needed attention was the cup that separates the magazine and piston springs. Some slight strain on the pins from recoil I'd wager. That has been since resolved. For this type of shotgun, I prefer plain. In truth I really wouldn't mind if it even had any checkering. I was expecting walnut, but it is most definitely birch. They will be getting replaced with some nicer grade walnut the next time the gun show rolls around. There is a guy there that has parts for any older shotguns you could imagine, including...a plethora of Winchester 1400 parts, stocks and barrels. Last time he had several very nice looking unfinished plain walnut stocks and forearms for the 1400.

Also the serial number places the manufacture date around '88

Last edited by BerdanSS; October 30, 2012 at 10:45 AM.
BerdanSS is offline  
Old October 31, 2012, 03:19 PM   #13
Senior Member
Join Date: September 30, 2009
Location: Eastcoast
Posts: 157
Great Find on your part I have it's brother, the Ranger 120 pump that came with a Deer Slug barrel (rifled sights)..takes both 2-3/4, 3in loves sporting clays

I'm no gun collector, however, I have purchased and sold many different brand long guns over the last 25yrs. My own experience has revealed to me, that Winchesters are bang for the buck. On any given day, you can find a well serviced used Winchester at a local gun shop in this pressed economy, that someone had to part with, due to these hard times. No worries for parts..Countless Wins have been sold and continue to be re-cycled thru many hands, which generates the need for a continuation of parts thru various suppliers.

Hopefully, Remington, Marlin and Mossberg, will start to build with quality and reliability once again..we all should know now, the big problems that have faced each of these gun makers.

All 3 of my Wins, have proven themselves, at the range and in the field under harsh conditions, without any trouble. Thankfully, they have provided much bounty for the table
Attached Images
File Type: jpg 20111116_2.JPG (121.3 KB, 91 views)
File Type: jpg IMG_20121030_153241-1[1].jpg (209.5 KB, 77 views)
musicmatty is offline  
Old November 8, 2012, 03:58 PM   #14
Senior Member
Join Date: December 8, 2009
Location: The Peoples Republic of Massac
Posts: 331
I just picked up a Win. mod 1400 two days ago, well its actually a Sears and Robuck Ted Williams 300. I got two barrels one Winchester w/ fixed modified choke and the other is the original Ted Williams barrel w/ an adjustable choke. The reason I mentioned this was to ask about the adjustable choke. Do these work well? I will be using the gun for trap.

I really like it so far, I've always had pumps.

80viking is offline  
Old November 8, 2012, 04:29 PM   #15
Senior Member
Join Date: March 31, 2010
Location: Communist State of IL.
Posts: 1,564
I have had a Win 1400 for about 15 years which I got in trade. I have shot 100's and 100's of loads from target loads to slugs and it has always worked perfectly!

I mainly use it for knocking clay's out of the sky and it does it well.

I have always had a much higher opinion of the 1400 because I own one!
NRA Life Member, SAF Member
Xfire68 is offline  
Old November 8, 2012, 09:05 PM   #16
Senior Member
Join Date: August 27, 2006
Location: Terrell, Texas
Posts: 238
Nothing wrong with the 1400 (Mk I and II) guns - keep it clean and oiled. Parts can be a challenge but there is stuff out there. The only real soft spot on the guns is the plastic follower - if you attempt to load too many shells it will disintegrate and a replacement is very hard to find. The later 1400 series guns were made up of some really cheap parts and were worth about what you paid for it.
Couzin is offline  
Old November 9, 2012, 07:17 AM   #17
Senior Member
Join Date: September 22, 2011
Location: Illinois
Posts: 342
Congrats on the good buy! Ive heard some stories about them too. Im glad you found a good one.
droptrd is offline  
Old March 14, 2013, 09:48 AM   #18
Join Date: March 6, 2013
Posts: 62

I too came across a Winchester 1400 Ranger 12ga about the same time as the OP. Got it from a co-worker for $175. He had never shot it.

I've put about 400rd of Winchester x target loads through it.

It doesn't say on the barrel, but how can you tell what choke it is? It came with a screw in choke but took it out and now I can't hit anything with it (trap) so I'll but it back in for trap league tonight.

I figured it would/is a good starter Shotgun and move up to a Higher quality ? gun later.
REDBULL600 is offline  
Old March 14, 2013, 01:14 PM   #19
Senior Member
Join Date: October 25, 2010
Location: New Mexico
Posts: 853
I owned one in 20 ga. Never again. It's the only gift gun I've ever sold.
chewie146 is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 08:02 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.09278 seconds with 9 queries