Smith and Wesson serial number search - Page 87

laytonj1 · November 21, 2009, 01:10 AM

Quote:

K 160793

You have a Target Masterpiece made in 1952. When S&W started assigning model numbers around 1958 it became known as the model 14.
The engraving may or may not have been done by S&W. Has the engraving been signed or initialed? Pictures would help.

Jim

che · November 21, 2009, 01:24 AM

[IMG]s&w10[/IMG]it has some initials that hiden in the flowers U.S.RA

somehow I cannot up load pictures

che · November 21, 2009, 09:20 AM

Dilligaf · November 21, 2009, 11:26 AM

I have a Mod. 49 with a serial of J572XXX, can someone tell me when it was made?

Thanks!

FlyFish · November 21, 2009, 12:24 PM

Quote:

I have a Mod. 49 with a serial of J572XXX, can someone tell me when it was made?

In the 1976 (J370001) to 1977 (J610000) period.

Dilligaf · November 21, 2009, 01:45 PM

Quote:

In the 1976 (J370001) to 1977 (J610000) period.

Excellent, thanks!

sliverflinger · November 21, 2009, 02:18 PM

As a very new member I'm not sure if it's kosher to ask an on topic question and an off topic in the same post , but here goes.My 4" mod. 29 has an SN S193xxx . It also has an odd screw on the front of the trigger guard. Now the off topic, my wife got a Taurus 3" five shot 41 Mag pistol. Does anyone make speed loaders for it?

FlyFish · November 21, 2009, 04:24 PM

sliverflinger -

Your 29 dates from 1958-59, more likely the latter because the SN is near the end of the range (S194499). Nothing odd about the trigger guard screw - what would be odd is if it didn't have one. "Modern" S&W revolvers originally had 5 screws - 4 on the sideplate and one in front of the trigger guard. The upper sideplate screw, which was up near the rear sight, was eliminated around 1956 to create the so-called 4-screw design. The trigger guard screw was dropped in the late 50s, early 60s (depending on model), resulting in the current 3-screw configuration (one is hidden under the grips, so only 2 are visible).

Sorry, don't know anything about Taurus.

garnz · November 21, 2009, 07:02 PM

I inherited this gun from my grandfather and it's been sitting in my nightstand for a few years. I've been doing some research and I think it is a S&W .38 Special Model 14 Target Masterpiece.

Serial #: K2865XX

Any info would be greatly appreciated.

Thanks

morbid0000 · November 21, 2009, 08:05 PM

.357 stainless with markings under the cylinder hinge, visable when cylinder is open:

65-3 B13 667xx AYT2xxx

Is that enough to tell me what model, year, etc. the gun is?

Thanks!

FlyFish · November 21, 2009, 09:44 PM

garnz: 1956, which would technically make it a pre-Model 14 K-38 Target Masterpiece. Could also be a Combat Masterpiece (pre-15) if it has a ramped front sight, vs. the Patridge-style target sight.

morbid0000: 65-3 is the model number, and the AYT serial number prefix would date the gun to 1987.

onebadscrambler · November 21, 2009, 09:45 PM

FlyFish got it.

che · November 22, 2009, 04:09 PM

here are some pictures of 38 special ctg, ..I took this pictures with my phone they maybe not so clear

garnz · November 22, 2009, 04:52 PM

I found another thread on here that solved the mystery. It's definitely a 1956 K38 Target Masterpiece.

Thanks for the info.

rdotson159 · November 22, 2009, 09:13 PM

I have a S&W .38 Special, with the original box. When the gun was passed to me by my father, I believe it hadn't been shot much if at all, but the cylinder showed some wear just opening and closing.

I've shot a few hundred rounds through it because I like it. Still looks brand new.

Would like to know the year it was made, and the exact model. The ink on the box has faded.

serial #: D370xxx

thanks
randy

laytonj1 · November 22, 2009, 09:44 PM

Quote:

serial #: D370xxx

1971/72.
See pic for location of model number. Likely a model 10-6.
This is a model 629-1:

Jim

laytonj1 · November 22, 2009, 09:51 PM

Che,

I wouldn't know if the engraving is from S&W or not. The only way to know for sure is to request a letter from S&W. If it came from the factory engraved it will indicate that on the letter. Cost of the letter is $50.

Jim

che · November 22, 2009, 11:21 PM

Thanks Jim........ What are the steps to do that? mine only has a five where yours have the model

tel0004 · November 23, 2009, 01:10 AM

Quote:

che Thanks Jim........ What are the steps to do that? mine only has a five where yours have the model

http://www.smith-wesson.com/webapp/w...ectionId=10504

Go to that link and there you can download a form to fill out and send it.

You have a K38 combat masterpiece.

In 1957, S&W started using model numbers. Since your gun was made before then it doesn't follow that pattern. When they switched to the model numbers, it became a Model 14 (and very little if anything was changed at that time), so that gun is also reffered to as a Pre Model 14.

shooter_from_show-me · November 23, 2009, 12:24 PM

Quote:

Originally Posted by Radagast

Shooter-from-show-me: Your model 15-2 is from 1965.

Is the .22 on a slightly smaller frame than the model 15? Did you take the serial number from the butt? If so it is probably a Model 34 .22/32 Kit Gun. The serial number dates it to between 1960 & 1965.

If the .22 is on the same frame sizer as the model 15 then it may be a model 18 or a model 14 or a model 45. Is their a C S, or K prefix in front of the serial number on the butt. (ignore numbers stamped inside the frame). Is the front sight ramped or square cut? Does it have a fixed or adjustable rear sight?

Sorry, I still need help with this one. Finally took off the wood grips on the .22LR Smith & Wesson and the serial number is K2949xx. Has a ramped front sight and a adjustable rear sight. But I'm really thinking it is a Model 18. By looks of it. Hopefully this will help narrow it down the search.

Thanks!!!

Bill

houserocker · November 25, 2009, 10:42 PM

I have a Stainless S&W Model 64 4". The serial # is BBH4***. Could you guys help me date it? Also, what is the best way to clean the fouling off of the front of the cylinder?

Gun 4 Fun · November 25, 2009, 10:45 PM

Welcome to the forum, and 1988 for a DOM.
A Lead Wipe Away cloth will easily remove those stains on the face of the cylinder, but they will come right back. I wouldn't worry about it unless you are going to sell it and want it nice and clean.

laytonj1 · November 25, 2009, 10:59 PM

Quote:

Sorry, I still need help with this one. Finally took off the wood grips on the .22LR Smith & Wesson and the serial number is K2949xx. Has a ramped front sight and a adjustable rear sight. But I'm really thinking it is a Model 18. By looks of it. Hopefully this will help narrow it down the search.

K2949XX = 1957.
It would be a K-22 Masterpiece (pre model 17) with a 6" barrel or a K-22 Combat Masterpiece (pre model 18) with a 4" barrel.

Jim

public servant · November 25, 2009, 11:49 PM

Evening...

I wonder if someone could tell me the mfg. date on a S&W 19-5 S/N ADS6XXX?

Any help would be greatly appreciated.

laytonj1 · November 26, 2009, 12:18 AM

Quote:

I wonder if someone could tell me the mfg. date on a S&W 19-5 S/N ADS6XXX?

1983.

Jim

November 21, 2009, 01:24 AM	#2152
che Junior Member Join Date: November 21, 2009 Posts: 6	[IMG]s&w10[/IMG]it has some initials that hiden in the flowers U.S.RA somehow I cannot up load pictures Last edited by che; November 21, 2009 at 09:42 AM.

November 21, 2009, 02:18 PM	#2157
sliverflinger Member Join Date: January 20, 2008 Posts: 18	S&W serial number search As a very new member I'm not sure if it's kosher to ask an on topic question and an off topic in the same post , but here goes.My 4" mod. 29 has an SN S193xxx . It also has an odd screw on the front of the trigger guard. Now the off topic, my wife got a Taurus 3" five shot 41 Mag pistol. Does anyone make speed loaders for it?

November 21, 2009, 07:02 PM	#2159
garnz Junior Member Join Date: November 21, 2009 Posts: 2	Model 14 Target Masterpiece? I inherited this gun from my grandfather and it's been sitting in my nightstand for a few years. I've been doing some research and I think it is a S&W .38 Special Model 14 Target Masterpiece. Serial #: K2865XX Any info would be greatly appreciated. Thanks

November 22, 2009, 04:09 PM	#2163
che Junior Member Join Date: November 21, 2009 Posts: 6	here are some pictures of 38 special ctg, ..I took this pictures with my phone they maybe not so clear Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.

November 22, 2009, 04:52 PM	#2164
garnz Junior Member Join Date: November 21, 2009 Posts: 2	Thanks Fly Fish I found another thread on here that solved the mystery. It's definitely a 1956 K38 Target Masterpiece. Thanks for the info.

November 21, 2009, 09:20 AM	#2153
che Junior Member Join Date: November 21, 2009 Posts: 6

November 21, 2009, 11:26 AM	#2154
Dilligaf Senior Member Join Date: March 27, 2005 Posts: 157	I have a Mod. 49 with a serial of J572XXX, can someone tell me when it was made? Thanks!

November 21, 2009, 04:24 PM	#2158
FlyFish Senior Member Join Date: January 20, 2009 Location: Overlooking the Baker River Valley Posts: 1,727	sliverflinger - Your 29 dates from 1958-59, more likely the latter because the SN is near the end of the range (S194499). Nothing odd about the trigger guard screw - what would be odd is if it didn't have one. "Modern" S&W revolvers originally had 5 screws - 4 on the sideplate and one in front of the trigger guard. The upper sideplate screw, which was up near the rear sight, was eliminated around 1956 to create the so-called 4-screw design. The trigger guard screw was dropped in the late 50s, early 60s (depending on model), resulting in the current 3-screw configuration (one is hidden under the grips, so only 2 are visible). Sorry, don't know anything about Taurus.

November 21, 2009, 08:05 PM	#2160
morbid0000 Junior Member Join Date: November 21, 2009 Posts: 2	.357 stainless with markings under the cylinder hinge, visable when cylinder is open: 65-3 B13 667xx AYT2xxx Is that enough to tell me what model, year, etc. the gun is? Thanks!

November 21, 2009, 09:44 PM	#2161
FlyFish Senior Member Join Date: January 20, 2009 Location: Overlooking the Baker River Valley Posts: 1,727	garnz: 1956, which would technically make it a pre-Model 14 K-38 Target Masterpiece. Could also be a Combat Masterpiece (pre-15) if it has a ramped front sight, vs. the Patridge-style target sight. morbid0000: 65-3 is the model number, and the AYT serial number prefix would date the gun to 1987.

November 21, 2009, 09:45 PM	#2162
onebadscrambler Member Join Date: November 3, 2009 Location: Fruitland Park, FL Posts: 36	FlyFish got it.

November 22, 2009, 09:13 PM	#2165
rdotson159 Junior Member Join Date: November 22, 2009 Posts: 1	Serial # lookup I have a S&W .38 Special, with the original box. When the gun was passed to me by my father, I believe it hadn't been shot much if at all, but the cylinder showed some wear just opening and closing. I've shot a few hundred rounds through it because I like it. Still looks brand new. Would like to know the year it was made, and the exact model. The ink on the box has faded. serial #: D370xxx thanks randy

November 22, 2009, 09:51 PM	#2167
laytonj1 Senior Member Join Date: June 1, 2005 Posts: 4,443	Che, I wouldn't know if the engraving is from S&W or not. The only way to know for sure is to request a letter from S&W. If it came from the factory engraved it will indicate that on the letter. Cost of the letter is $50. Jim

November 22, 2009, 11:21 PM	#2168
che Junior Member Join Date: November 21, 2009 Posts: 6	Thanks Jim........ What are the steps to do that? mine only has a five where yours have the model

November 25, 2009, 10:42 PM	#2171
houserocker Junior Member Join Date: November 25, 2009 Location: Maryland Posts: 4	I have a Stainless S&W Model 64 4". The serial # is BBH4***. Could you guys help me date it? Also, what is the best way to clean the fouling off of the front of the cylinder?

November 25, 2009, 10:45 PM	#2172
Gun 4 Fun Senior Member Join Date: November 3, 2008 Posts: 956	Welcome to the forum, and 1988 for a DOM. A Lead Wipe Away cloth will easily remove those stains on the face of the cylinder, but they will come right back. I wouldn't worry about it unless you are going to sell it and want it nice and clean.

November 25, 2009, 11:49 PM	#2174
public servant Junior Member Join Date: November 25, 2009 Location: Indiana Posts: 5	S&W model 19-5 Evening... I wonder if someone could tell me the mfg. date on a S&W 19-5 S/N ADS6XXX? Any help would be greatly appreciated.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search