Problem with Stevens model 325

Kyle2014 · June 13, 2014, 08:48 PM

When I go to pull back the bolt of the rifle, it slides all the way out. I have a new sear and firing spring but it only help a little. After installing them I have no idea how to fix it

The issue is that the sear does not fully resets after pulling the trigger. No idea why. I don't have enough money to visit a gunsmith.

**4V50 Gary** · June 13, 2014, 09:44 PM

I suspect that it is not reassembled correctly. The sear may need fitting too.

Kyle2014 · June 13, 2014, 10:33 PM

I know I have reassembled it correctly I have took it down and put it back together 20 times at least by now and fitting of the shear what do you mean?

Got it working

June 13, 2014, 08:48 PM	#1
Kyle2014 Junior Member Join Date: June 13, 2014 Posts: 13	Problem with Stevens model 325 When I go to pull back the bolt of the rifle, it slides all the way out. I have a new sear and firing spring but it only help a little. After installing them I have no idea how to fix it The issue is that the sear does not fully resets after pulling the trigger. No idea why. I don't have enough money to visit a gunsmith.

June 13, 2014, 09:44 PM	#2
4V50 Gary Staff Join Date: November 2, 1998 Location: Colorado Posts: 21,838	I suspect that it is not reassembled correctly. The sear may need fitting too. __________________ Vigilantibus et non dormientibus jura subveniunt. *Molon Labe!*

June 13, 2014, 10:33 PM	#3
Kyle2014 Junior Member Join Date: June 13, 2014 Posts: 13	I know I have reassembled it correctly I have took it down and put it back together 20 times at least by now and fitting of the shear what do you mean? Got it working Last edited by Kyle2014; June 14, 2014 at 12:41 PM.