January 14, 2023, 05:52 PM | #101 | ||||
Senior Member
Join Date: December 13, 2005
Posts: 4,540
|
Quote:
Quote:
Quote:
Quote:
That inconsistent advice came from the agency. Where the advice has been that one can shoulder a brace or not without violating the NFA, the agency position that its current position is a clarification may not be persuasive. The argument based on the statutory language defining a rifle as "intended to be fired from the shoulder" shook loose a memory from congression hearings prior to the AWB. The witness from the ATF testified with concern about just one of the evil features of AR15s. He assured the congressman that the only reason to put a "pistol' grip on a rifle is to allow faster unaimed firing from the hip.
__________________
http://www.npboards.com/index.php |
||||
January 14, 2023, 08:12 PM | #102 |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 29,679
|
I've got my opinions, feel free to disagree, but the way I'm looking at it right now is that first, the ATF actually has been remarkably consistent on one point, particularly, and that is, if it has a stock, and a barrel shorter than the rifle length (16") then it is an SBR.
And, while there has been more than a bit of back and forth about whether a brace is a stock and when its not, they have been consistent about it, if it was a brace, and NOT a stock then it wasn't an NFA item. They used the definition that has been in use since at least 1934, which was the design intent. Literally, if if it was made to be shouldered, it was a stock, and if it wasn't, even though you could shoulder it, it was a brace. The ATF has always known that people could, and would shoulder the "brace" if physically possible, but they used the standard legal definition of designed intent. Until now. Since you they did know people were doing it, you can argue that the folks posting internet videos of them doing it didn't matter, or change anything, but I disagree. I think what the internet videos did was not so much pointing out and showing that people were doing it (ATF knew that, didn't seem to care much) it was the fact that those videos were the 21st century equivalent of sticking out your tongue, putting thumbs in your ears waggling you fingers and shouting "neener neener" at the ATF, for the entire world to see. And while the changes might have been simmering on a back burner somewhere in the ATF, the affront to the law, and by extension the ATF from those videos moved the issue to a front burner and turned up the heat. Note that the "clarification" ruling just released includes language about taking into account "(vi) information demonstrating the likely use of the weapon in the general community." and THAT is something new. IF I'm understanding this correctly now, its not JUST what the design intent was, but ALSO how people are likely to use it that factors into whether or not its a stock or a brace. For that, I thank those U-tubers.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
January 14, 2023, 09:49 PM | #103 | ||
Senior Member
Join Date: December 13, 2005
Posts: 4,540
|
Quote:
Quote:
I see an agency that approved a brace without respect to use, and that in 2014 then confirmed that use can't alter classification under the NFA. https://www.guntrustlawyer.com/files/2015/02/sb15.pdf In 2015, it found an entirely new position that where and how one holds a device determines whether it was "re-designed". https://docs.google.com/viewerng/vie...s.pdf&hl=en_US. Only a couple of years later, it decided that holding a brace like a stock sometimes wasn't a re-design. https://vpc.org/wp-content/uploads/2...ch-21-2017.pdf The "design intent" of the brace itself isn't material to whether the agency objects to the way the device is used. The abandoned points system floated but later retracted by the agency made fairly plain that they were looking the utility of the entire weapon to which the brace was attached, not the "design intent" or likely use in the "community". On the issue presented by braces (as opposed to SBRs) the consistency doesn't overwhelm me.
__________________
http://www.npboards.com/index.php |
||
January 14, 2023, 10:59 PM | #104 | |
Staff
Join Date: February 12, 2001
Location: DFW Area
Posts: 25,281
|
Quote:
That said, clearly there was need for some sort of final clarification/clear statement of the rule and they've provided that along with a lot of explanation and backstory. The fact that it's complicated is due to several factors, the main one of which is that the whole idea of stabilizing braces was intended to push the boundaries of the NFA and it did so successfully enough that even the regulating/enforcement agency had difficulty drawing a clear line between what was regulated and what was not. I think what we are teaching them is that the next time something like this comes up, they will immediately issue a huge complicated ruling if they can't figure out a way to just make a flat out prohibition work with the way the law is written. Clearly they would have been far better off had they just said up front that it looked like a shoulder stock, worked like a shoulder stock and so it was prohibited without NFA registration. It was their honest attempt to provide a ruling that gave the benefit of the doubt to the manufacturer and the gun community that resulted in the confusion--it's ironic that is now being used to indict them.
__________________
Do you know about the TEXAS State Rifle Association?
|
|
January 14, 2023, 11:34 PM | #105 | |
Staff
Join Date: September 25, 2008
Location: CONUS
Posts: 18,723
|
Quote:
Some people just don't know when to shut up. I blame the same mentality for the current crop of "ghost gun" laws that are popping up all across the country. I've know about 80% receivers for decades. And for as long as I've known about them, I've tried to discourage people from posting about them and discussing them on the Internet -- because the government and the anti-gun advocates read the Internet. So here we are. 80% frames and receivers are on the way to being regulated out of existence. Wrist braces, which were previously accepted and allowed for "occasional" firing from the shoulder are now on their way to being short-barreled rifles. Why? BECAUSE IDIOTS COULDN'T STOP PUBLICIZING THEM. That's my story, and I'm stickin' to it.
__________________
NRA Life Member / Certified Instructor NRA Chief RSO / CMP RSO 1911 Certified Armorer Jeepaholic |
|
January 15, 2023, 09:41 AM | #106 |
Senior Member
Join Date: August 12, 2009
Location: Athens, Georgia
Posts: 2,585
|
As the owner of a braced AR pistol, what are my options to comply with this regulation and what would you choose?
|
January 15, 2023, 11:20 AM | #107 |
Senior Member
Join Date: December 13, 2005
Posts: 4,540
|
The usual implicit warning is that I'm not your lawyer and my post isn't legal advice. I'd also add that I am certain I don't know everything you'd want to know about this "final rule".
The first two traits of an individual possession that might influence the decision would be whether you plan to take it out of state frequently and whether your state allows possession of NFA items. My untutored impression is that GA has fairly liberal regulations on firearms and that NFA items aren't prohibited. I also don't know whether you need a brace or how your pistol is configured. The risk with each option varies. 1. Do nothing. The most risky would be to ignore the problem and see if anyone notices. You could also wade through the various non-standards and assess the likelihood that someone at the agency will decide to prosecute you. The up front costs of this option are low, but the potential future cost are high. 2. Submit an "amnesty" Form 1. You could submit the form 1 within the specified period and see whether you get a stamp. The immediate cost will be restrictions on interstate travel and the cost of the fingerprint submission and engraving. Some people will feel discomfort at providing proof of violation of the NFA to the agency. The agency has indicated that it won't pursue enforcement in the near term, but the agency has engaged in enforcement in the face of similar representations in the past. You are not entitled to assert detrimental reliance against the government because that is an equitable remedy. There is a non-trivial risk that when this regulation is the subject of an injunction, your application will sit without agency action, or be used as evidence in a prosecution. 3. Submit a normal Form 1. You could take your pistol apart and file a form 1 for a legitimate SBR. It will cost you the tax, the fingerprint transmission and engraving, and it will be subject it to regulation of interstate travel, but you won't have confessed to a federal felony. While you are at it, you might also get a real stock. 4. Make it into a non-NFA item. You could get a 16" barrel. There is a possibility that the agency will prosecute you for constructive possession if you keep the parts. The benefit is that you get to travel like a free person with your rifle, you get better velocity and reduced muzzle blast. 5. Destroy or surrender the firearm. The risk here is that you are now a firearm short of your prior count, but it should reduce the threat of state action. I like option 3, submit a $200 form 1. I know people don't like to be on the NFA registry because it's a list, but we are all on lists anyway. I've used the cheekweld method of stabilization and I don't care for it. A good stock and sling are important to me. You might come to a different conclusion.
__________________
http://www.npboards.com/index.php |
January 15, 2023, 11:32 AM | #108 | |
Senior Member
Join Date: November 17, 1999
Location: NW Wi
Posts: 1,713
|
Quote:
And there appears to be another oprion if you are unsure if your specific firearm needs registration. You can send it in for determination. Not entirely sure why any individual would risk this. https://www.atf.gov/rules-and-regula...edpdf/download MARKINGS 27. ONCE THE FIREARM IS REGISTERED, AM I REQUIRED TO MARK THE FIREARM SINCE I MANUFACTURED A SHORT-BARRELED RIFLE (SBR)? • If the SBR equipped with a “stabilizing brace” is registered within the 120-day tax forbearance period, the possessor is allowed to adopt the markings on the firearm. The maker’s marking exception is only applicable to firearms that are registered pursuant to the final rule. If the firearm is a personally made firearm, the possessor must mark in accordance with 27 CFR 478.92 & 479.102 prior to submitting the E-Form 1. Last edited by zeke; January 15, 2023 at 11:42 AM. |
|
January 15, 2023, 11:41 AM | #109 | |
Senior Member
Join Date: December 13, 2005
Posts: 4,540
|
Quote:
An unrelated question: If millions of pistols with braces designed to serve as stocks are in the market, aren't they "in common use"?
__________________
http://www.npboards.com/index.php |
|
January 15, 2023, 11:51 AM | #110 |
Senior Member
Join Date: November 17, 1999
Location: NW Wi
Posts: 1,713
|
|
January 15, 2023, 12:11 PM | #111 |
Staff
Join Date: September 25, 2008
Location: CONUS
Posts: 18,723
|
Isn't another option to simply remove the brace and destroy it (or turn it in), thus rendering the firearm a non-NFA pistol again?
I can't say which path I would choose, because I have intentionally avoided owning an AR pistol. I saw this coming several years ago, and I decided I didn't want to poke the bear.
__________________
NRA Life Member / Certified Instructor NRA Chief RSO / CMP RSO 1911 Certified Armorer Jeepaholic |
January 15, 2023, 12:29 PM | #112 |
Senior Member
Join Date: November 17, 1999
Location: NW Wi
Posts: 1,713
|
"Isn't another option to simply remove the brace and destroy it (or turn it in), thus rendering the firearm a non-NFA pistol again?"
Would not count on this, depending on what specifc firearm is being referenced and how ATF is interpreting the five "factors" This final rule’s amended definition of “rifle” clarifies that the term “designed, redesigned, made or remade, and intended to be fired from the shoulder” includes a weapon that is equipped with an accessory, component, or other rearward attachment (e.g., a “stabilizing brace”) that provides surface area that allows the weapon to be fired from the shoulder, provided that other factors, as listed in the rule, indicate that the weapon is designed, made, and intended to be fired from the shoulder. These other factors are:" |
January 15, 2023, 01:03 PM | #113 | |
Senior Member
Join Date: December 13, 2005
Posts: 4,540
|
Quote:
__________________
http://www.npboards.com/index.php |
|
January 15, 2023, 01:24 PM | #114 | |
Senior Member
Join Date: December 28, 2009
Location: North Central Illinois
Posts: 2,738
|
Quote:
Did you buy a pistol brace to use as their claimed intention because you are handicapped, or did you buy it as a "work-around" of the SBR laws? Seriously now, keep the answer to yourself. And please, stop admitting you have a pistol brace on the internet. Extremally unpopular opinion follows: Keep kicking that sleeping bear you fools! If you are exploring a cave and you come across a sleeping bear, do you keep quiet and don't touch it, or do you boldly walk up to it and kick it? People with bump stocks, pistol braces and forced reset triggers kick that sleeping bear. Admit it to yourself, pistol braces were invented to skirt around the short barrel rifle law, not to assist handicapped people to hold up an AR pistol. It's as obvious as the nose on my face. Everyone claims it's for helping the handicapped, but you know as well as I do it's a work-around of law. You kicked the sleeping bear. The bear is the Bureau of Alcohol Tobacco Firearms and Explosives. You kicked that bear with a pistol brace in your hand. You kicked that bear with a forced reset trigger in your hand. You kicked that bear with a bump stock in your hand. You kicked that bear enough times that now it's pissed, and you don't understand why it's pissed? DO NOT KICK A SLEEPING BEAR. Do not piss off the BATFE. Anybody that owns an AR pistol or an AK pistol has more money than brains. They are absolutely worthless other than making noise and burning up money. They are not accurate. They are worthless for self defense. They are worthless in a combat situation. All they are good for is emptying your wallet with 30 seconds of enjoyment. Keep kicking that bear, and you will be left with nothing but a .22 revolver and a single shot .410 shotgun. |
|
January 15, 2023, 01:33 PM | #115 |
Senior Member
Join Date: November 17, 1999
Location: NW Wi
Posts: 1,713
|
Imo this "rule" is easily challenged and will be hard to defend. However would comply with it till/if it is overruled.
Ime, every goobermental decision/ruling/law is challengeable. This means everything in the rule is challengeable, including the extensive documentation of how they handled the comments on the previous proposal and the comments themselves, which should have been in a separate summary. Imo, this was novice rule writing for that and the following reasons. 1-They changed the definition of rifle, which practically changes previous law. They didn't change an interpretation of the definition, they changed the actual wording. Changing definitions is changing laws, not applying an interpretation of them. 2- It is ridiculously long and filled with all kinds of challengeable statements. 3-They never provided a specific example of what would comply with the ruling, while providing numerous specific examples of what wouldn't comply. 4-They waived the $200 fee and engraving requirements of an existing law. 5-With the exemption of the specific examples noted, there are no clear requirements for compliance that could be applied consistently or clearly. 6-They give an option to send your firearm in for determination if you can't figure it out. They appear to say they will send it back if they determine it doesn't comply. Am no lawyer, but this would seem highly illegal to send back an illegal sbr to the owner. Time will tell, and the above is only an opinion. |
January 15, 2023, 02:00 PM | #116 |
Senior Member
Join Date: November 13, 2006
Posts: 8,346
|
Its wrong,its inappropriate, for a Federal Agency to go into an emotional state (kicked bear) and retaliate.
Control is an illusion. Adults are not here to control other adults. We are equals,remember? Yes,we can have laws. Yes,we can arrest and prosecute those who actually do harm to others. If we hope to have a society where people check themselves within lawful boundaries, why do we justify a Federal Agency going on the warpath over their fear of losing control? CONTROL!! If you go rogue and murder people in their sleep with a KaBar knife,you deserve society's rage for the harm you have done. (Found guilty,of course) The killing was out of control. If you go to a safe space, shoot 1000 rounds with a braced AR pistol rapid fire,brace on your shoulder, grinning ear to ear... So what? What harm have you done? Who is injured? MAYBE some bureaucrat sees a video. That dang First Amendment !! Its got to go! Mr Bear, sees it,and feels POKED!! Look here Mabel!! That dang Gen Xer!! With his saggy britches !! Got a short barreled AR-15 pistol!! Shooting up the world!! He ain;t respecting my authority! That hacks me off!! (Grabs another donut) "By golly,we are gonna have a MEETING! Tomorrow! Teach them somber itches to poke this bear! Who was harmed but Mr Bear's ego? His "Power",His "Control" ? Thats sick. If the guy is shooting roadsigns, bust the crap out of him. How many times did the FBI interview the Parkland school shooter? Yeah...well,uh...We didn't want to stigmatize him...Its uh Out of our control... |
January 15, 2023, 05:17 PM | #117 | ||||
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 29,679
|
Quote:
I think we're throwing about a lot of terms, and missing some important points. One being that a brace does not make a pistol an NFA item. A STOCK does. IF a pistol brace meets the revised definition, then its a STOCK, in the ruling of the ATF. Argue about the revised definition of what is, and isn't a stock, argue about if the ATF had the legal authority to rule that way, fine. Don't argue that they changed the legal definition of a rifle, they didn't. Quote:
I am curious about the "marking requirement". Is this something buried in the new ruling that I missed? (entirely possible) or is it something being required IF you are designated the "manufacturer" of an SBR?? What marking is required? Specifically, what does the marking have to say? Is it any different than the standard markings required on all firearms?? I have seen SBRs that were purpose built as SBRs by a manufacturer and SBRs that were "created" and registered as SBRs by owners, none had any special markings indicating SBR on the gun. The tax stamp and paperwork identified the gun by serial# and barrel length. So where does this "marking requirement" come from??? Quote:
I went through the whole "stocked pistol" thing with an actual stocked pistol, a Broomhandle Mauser, way back when. At one time, if you had the gun and the stock, it was an NFA item. Not wishing to become entangled in the NFA rules, I did not get a stock for my Mauser. THEN, the ATF ruled that a stock for that pistol was ok, and not an NFA item as it was a "curio & relic". SO, I got a stock (reproduction I assumed) and all was fine, until the ATF "redefined" things and said only original period stocks qualified as curio & relics, and a reproduction stock did not so having a reproduction stock and the pistol made them an NFA item. I sold the stock immediately (entirely legal to do) and wound up selling the pistol a few years later, ending my involvement in those kinds of things. This is, in many ways similar, your "braced" AR pistol is now (possibly) being a stocked pistol and therefore an NFA item. Register it under the allowed amnesty rules, you're covered. Remove the brace (now a "stock") and the gun is just a pistol, nothing else. Keep the former brace and now a stock and the pistol and you might be in the "constructive possession" category, and people have been prosecuted for that. regarding this, Quote:
None of the guns covered by the new ruling are being banned or prohibited, provided they get registered as NFA items, or get reconfigured to not be classed as NFA items. Of course, that would be in a perfect world, and we don't live in one.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
||||
January 15, 2023, 05:51 PM | #118 |
Senior Member
Join Date: November 17, 1999
Location: NW Wi
Posts: 1,713
|
https://www.atf.gov/firearms/firearm...finition-rifle
"The term “Rifle” means a weapon designed or redesigned, made or remade, and intended to be fired from the shoulder and designed or redesigned and made or remade to use the energy of the explosive in a fixed metallic cartridge to fire only a single projectile through a rifled bore for each single pull of the trigger." https://www.atf.gov/rules-and-regula...espdf/download Factoring Criteria for Firearms with Attached “Stabilizing Braces” AGENCY: Bureau of Alcohol, Tobacco, Firearms, and Explosives, Department of Justice. ACTION: Final rule. SUMMARY: The Department of Justice (“Department” or “DOJ”) is amending the regulations of the Bureau of Alcohol, Tobacco, Firearms, and Explosives (“ATF”) to clarify when a rifle is designed, made, and intended to be fired from the shoulder. Specifically, under the Gun Control Act of 1968 (“GCA”) and the National Firearms Act of 1934 (“NFA”) the definition of “rifle” shall include a weapon that is equipped with an accessory, component, or other rearward attachment (e.g., a “stabilizing brace”) that provides surface area that allows the weapon to be fired from the shoulder, provided other factors, as described in this preamble and in the amended regulations, indicate that the weapon is designed, made, and intended to be fired from the shoulder" They actually state they are changing the definition. Ime, if you change a definition in a law, you change the law. |
January 15, 2023, 06:04 PM | #119 |
Senior Member
Join Date: August 12, 2009
Location: Athens, Georgia
Posts: 2,585
|
Thanks for the suggestions on how I might comply with the new regulation.
I purchased the AR pistol as a light weight option to carry at the hunting land during the off season. One of my favorite recreational activities is walking the hunting land and changing my camera cards. I wanted a light weight firearm that I could get quick hits up close and still have a reasonable chance of taking a feral pig or coyote at up to 150 yards or so. The AR pistol was light weight and I added a brace to it to have a convenient place for a rear sling attachment point. A ten round Pmag with Hornady GMX ammo and an inexpensive Sig red dot made for a light weight package that is reasonably quick up close and still able to hit a ten inch plate at 200 yards. There are obviously other firearms that could fill this role but the AR pistol worked for me. From the great suggestions posted here it seems like I have some options: 1) Register it as an SBR. I did an E-file back in November for a form 4 item that is still in ATF Purgatory, so my finger prints and photo should still be fresh. I assume if I registered the firearm, I could change the buffer tube and put a proper stock on it that would no doubt make the firearm more shootable for me. 2) I could get rid of the brace and put a sling mount on the buffer tube or castle nut and hope the ATF doesn't make another rule change that makes all AR pistols NFA items. 3) I could turn it into a rifle. I could ditch the short barrel for a light weight non NFA barrel and associated hardware, change the buffer tube, add a proper stock, and the result might work fine for which I was using the braced pistol. This would be the most expensive option but it might be the most fun. I'm sorry if my question or thoughts on this new ATF regulation offended anyone, but I do want to comply with this new regulation and I'm not an expert on the topic. |
January 15, 2023, 06:10 PM | #120 |
Senior Member
Join Date: November 17, 1999
Location: NW Wi
Posts: 1,713
|
This is from their own website
https://www.atf.gov/rules-and-regula...edpdf/download MARKINGS 27. ONCE THE FIREARM IS REGISTERED, AM I REQUIRED TO MARK THE FIREARM SINCE I MANUFACTURED A SHORT-BARRELED RIFLE (SBR)? • If the SBR equipped with a “stabilizing brace” is registered within the 120-day tax forbearance period, the possessor is allowed to adopt the markings on the firearm. The maker’s marking exception is only applicable to firearms that are registered pursuant to the final rule. If the firearm is a personally made firearm, the possessor must mark in accordance with 27 CFR 478.92 & 479.102 prior to submitting the E-Form 1. The marking requirements and $200 payment are in long established law. Imo, this ruling is temporarily voiding these requirements from an established law, not voiding these requirements from a new law that would contain these requirements. Imo, there is a difference. But am not a lawyer. Imo, ATF does not have the legal capability to make new laws, or change existing laws without going through those who approve such things. Goobermental agency's job is to implement the law, or possibly make interpretations, not to make or change existing laws. But again, am not a lawyer. Imo, if you send your firearm to them for determination and they make a determination your firearm does not meet the ruling after the ruling is published, they have officially determined your firearm is illegal. The ATF can not legally ship an illegal firearms to individuals, imo. Amnesty or not. |
January 15, 2023, 08:36 PM | #121 | |
Senior Member
Join Date: December 13, 2005
Posts: 4,540
|
Quote:
__________________
http://www.npboards.com/index.php |
|
January 15, 2023, 09:32 PM | #122 | ||
Senior Member
Join Date: December 13, 2005
Posts: 4,540
|
Quote:
Quote:
__________________
http://www.npboards.com/index.php Last edited by zukiphile; January 15, 2023 at 09:49 PM. |
||
January 15, 2023, 09:55 PM | #123 | |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 29,679
|
Quote:
There is a difference between an illegal firearm and illegal possession of a firearm. A gun with an altered, defaced or removed serial number is essentially illegal to possess, under any circumstances. IT is an illegal gun. A firearm that is not legal because it is not registered, but would be, if registered is not an illegal gun, its an illegal possession of that gun. Look at any state that requires a permit for possession for a handgun to see this in operation. The gun is not illegal, possessing it without the required state license, is. The "amnesty period" for the formerly braced but now "stocked" pistols is not changing the law, it is changing, for a limited time, the enforcement (and prosecution) of the law. You are still technically guilty of breaking the law by having the unregistered NFA item, but you will not be prosecuted for that, IF you "fix the problem" by registering it within the amnesty period window. They have done this sort of thing before, and I believe it is within their legal authority to do so. My point here is that while you have committed a crime (breaking the statute law) there are situations where you will not be prosecuted for that crime. One example of this is justifiable homicide. Shooting and killing someone is always a crime. However, there are situations where the law finds commission of that crime legally justified. Yes, there is a world of difference in the details, I am in no way suggesting they are the same thing, only that the principle of having committed a crime and not being prosecuted for it applies in both cases.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
|
January 15, 2023, 10:29 PM | #124 | |
Staff
Join Date: February 12, 2001
Location: DFW Area
Posts: 25,281
|
Quote:
I don't think anyone here likes the NFA, but it's the law and it's going to stay the law because that's the way enough of the people in the U.S. want it.
__________________
Do you know about the TEXAS State Rifle Association?
|
|
January 15, 2023, 11:00 PM | #125 | |
Senior Member
Join Date: November 17, 1999
Location: NW Wi
Posts: 1,713
|
Quote:
Last edited by zeke; January 15, 2023 at 11:09 PM. |
|
Thread Tools | Search this Thread |
|
|