The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old September 5, 2015, 04:13 AM   #7001
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
If it is indeed one letter (K) and just 5 digits (and you didn't miss one), then it dates to 1950.

But since you said it is a five screw, then yep, sure sounds like a very nice old K-38. These guns got model numbers assigned to them around 1957... and the K-38 Masterpiece was issued the name of Model 14. So your revolver might casually be called or considered a "pre-Model 14."

Cool revolver!
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Old September 5, 2015, 09:59 AM   #7002
deputy584
Junior Member
 
Join Date: September 5, 2015
Posts: 1
Model 36

New to the forum and I thought I would post about a S&W .38SPL I have, the serial number is 38JXXX, can anyone help with a shipping date?

Thanks in advance
deputy584 is offline  
Old September 9, 2015, 12:39 PM   #7003
2ndsojourn
Senior Member
 
Join Date: January 15, 2013
Location: South Jersey
Posts: 1,416
I finally found a vintage Model 17-2 for a reasonable price, ser # K32394. Born on date?
2ndsojourn is offline  
Old September 9, 2015, 12:55 PM   #7004
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
Single alpha and only five digits indicates 1948 -- which wouldn't be a 17-2, that would be before model numbers. Now if you missed one digit and it's K32394x, that one shows 1958.

Could be me... sometimes the serial number index cornfuses me.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Old September 9, 2015, 05:18 PM   #7005
2ndsojourn
Senior Member
 
Join Date: January 15, 2013
Location: South Jersey
Posts: 1,416
The correct # is K632394
2ndsojourn is offline  
Old September 10, 2015, 05:07 AM   #7006
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
...and that would be 196.

OOPS, I meant "1965."
Sorry, just pokin' fun at ya.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Old September 10, 2015, 07:31 AM   #7007
2ndsojourn
Senior Member
 
Join Date: January 15, 2013
Location: South Jersey
Posts: 1,416
Thanks.
2ndsojourn is offline  
Old September 10, 2015, 07:28 PM   #7008
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
the serial number is 38JXXX
Can't tell you when it was shipped. However, that serial number was used in 1971/72. SN's ran from 1J1 in 1971 to 999J99 in 1972.

Jim
laytonj1 is offline  
Old September 11, 2015, 09:43 PM   #7009
stu925
Senior Member
 
Join Date: December 20, 2010
Location: New York
Posts: 953
Model 10

Picking up a S&W Model 10 next week serial # C4647XX and was wondering if someone could tell me when it was made. Thanks guys,

Stu
stu925 is offline  
Old September 11, 2015, 10:01 PM   #7010
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Ohio
Posts: 11,770
Believe C464xxx is going to be late 1960.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Old September 12, 2015, 10:02 PM   #7011
stu925
Senior Member
 
Join Date: December 20, 2010
Location: New York
Posts: 953
Thank you sir
stu925 is offline  
Old September 20, 2015, 07:48 PM   #7012
dankleinman
Junior Member
 
Join Date: March 17, 2015
Posts: 1
can you guys/gals help me date/identify this one Please

hello I picked up a nice little smith and wesson snub nose 5 shot 38 special today at a yard sale and was wondering if anyone could help me out . Its not like my other pistol as far as the way its marked. the serial number is only 5 digits and no letters 260xx on the cylinder arm is the letter A then below that is 94 25 7 it also has a flatter cylinder release than my 14-2 4in heavy barrel

any info would be great

thanks


dan
dankleinman is offline  
Old September 23, 2015, 08:14 PM   #7013
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
260xx on the cylinder arm
If that number matches the serial number on the underside of the grip frame then that dates it to 1952/53.
If not, then I'll need the number from the underside of the grip frame to date it.
Early "J" frames (pre 1968) had a flatter cylinder release latch.

Jim
laytonj1 is offline  
Old September 25, 2015, 09:16 AM   #7014
jeepjay
Junior Member
 
Join Date: September 24, 2015
Posts: 4
hi, new to the forum. I just picked up a S&W 38 2nd model top break revolver.
serial number is 70599 would anyone know the date of manufacture. thanks in advance, Jay
jeepjay is offline  
Old September 25, 2015, 09:38 AM   #7015
TomADC
Senior Member
 
Join Date: October 14, 2009
Location: San Diego County
Posts: 795
Welcome aboard see if this helps;

https://www.facebook.com/SmithWesson...71257209590018
TomADC is offline  
Old September 25, 2015, 11:56 AM   #7016
jeepjay
Junior Member
 
Join Date: September 24, 2015
Posts: 4
thanks Tom for that info but it does not seem to go back far enough, this revolver I believe was made in the 1880's
jeepjay is offline  
Old September 25, 2015, 12:13 PM   #7017
TomADC
Senior Member
 
Join Date: October 14, 2009
Location: San Diego County
Posts: 795
http://thefiringline.com/forums/showthread.php?t=108495
TomADC is offline  
Old September 25, 2015, 03:59 PM   #7018
jeepjay
Junior Member
 
Join Date: September 24, 2015
Posts: 4
One other thing that I didn't mention was that it is the model with the spur trigger
jeepjay is offline  
Old September 25, 2015, 07:41 PM   #7019
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
S&W 38 2nd model top break revolver. serial number is 70599
Quote:
it is the model with the spur trigger
It would be a 38 Single Action.
All the Standard Catalog of Smith & Wesson shows is the 2nd model was made from 1877 to 1891 with serial numbers running from 1 to 108255.

Jim
laytonj1 is offline  
Old September 28, 2015, 10:24 PM   #7020
jeepjay
Junior Member
 
Join Date: September 24, 2015
Posts: 4
thank you for the information. Jay
jeepjay is offline  
Old September 29, 2015, 07:58 PM   #7021
Mojave
Member
 
Join Date: June 11, 2011
Posts: 68
Scored two more classic S&W's:

Model 586 no dash, ADE0xxx, based on no dash I think between 81-85.

Model 36 no dash, 19xxx, I'd guess mid 60's maybe?

Any info would be appreciated!
Mojave is offline  
Old September 29, 2015, 08:16 PM   #7022
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Model 586 no dash, ADE0xxx, based on no dash I think between 81-85.
Model 36 no dash, 19xxx, I'd guess mid 60's maybe?
Model 586 no dash, ADE0xxx = 1983.

Model 36 no dash, 19xxx. = Take the serial number from the underside of the grip frame. 19xxx would date to 1952 which is 5 years before they stamped model numbers so that is likely an assembly number.

Jim
laytonj1 is offline  
Old September 29, 2015, 09:27 PM   #7023
Mojave
Member
 
Join Date: June 11, 2011
Posts: 68
Quote:
Model 586 no dash, ADE0xxx = 1983.

Model 36 no dash, 19xxx. = Take the serial number from the underside of the grip frame. 19xxx would date to 1952 which is 5 years before they stamped model numbers so that is likely an assembly number.

Jim
Thanks for the info! I'll grab the other serial number and post it up ASAP.
Mojave is offline  
Old September 29, 2015, 11:01 PM   #7024
Mojave
Member
 
Join Date: June 11, 2011
Posts: 68
Quote:

Model 36 no dash, 19xxx. = Take the serial number from the underside of the grip frame. 19xxx would date to 1952 which is 5 years before they stamped model numbers so that is likely an assembly number.

Jim
How about ANB9xxx?
Mojave is offline  
Old September 30, 2015, 10:08 PM   #7025
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
How about ANB9xxx?
!986/87.

Jim
laytonj1 is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:16 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.50470 seconds with 9 queries