The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old September 20, 2008, 04:34 AM   #426
SAMMY SNAKE
Junior Member
 
Join Date: September 18, 2008
Location: northern ireland
Posts: 11
many thanks Laytonj1 for date info
ed
SAMMY SNAKE is offline  
Old September 20, 2008, 06:20 AM   #427
Birdseye
Junior Member
 
Join Date: September 19, 2008
Posts: 10
Laytonj1, thank you for the info.

Ed
Birdseye is offline  
Old September 20, 2008, 08:15 AM   #428
MacJ
Member
 
Join Date: August 12, 2008
Location: Cumming Ga
Posts: 15
Smith & Wesson Date

Can someone please help me with the dates on my M36-0 727xx and M36-1 164xx.
Thanks to all that can help. I have a book on order 10days to get it. I would really like to know if i could.
MacJ is offline  
Old September 20, 2008, 08:35 AM   #429
Birdseye
Junior Member
 
Join Date: September 19, 2008
Posts: 10
Could I ask for one more?

It is my mod. 17-6 .22. s/n BDT5***


BTW ... my 686 model marking is 686-6 though it is a 7 shooter. I thought that the "6" referred to the number of shots. Any info on that?

Thanks

Ed
Birdseye is offline  
Old September 20, 2008, 08:37 AM   #430
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,489
A five digit serial number starting with 727 would put your 36 around 1955. It should not be stamped with a model number, which started around serial 125,000 in 1957.

There is something wrong with your serial number for the 36-1, though. It would not have had a 5 digit number lower than the straight 36.

The 36-1 was introduced in 1967 around serial number 600,000.

I suspect that you might be reading the "serial numbers" from the wrong place on the gun.

Where are you finding these numbers? The proper serial number should be coming off the butt on earlier S&Ws, not the inside of the crane cut. A 5-digit number inside the crane cut on early S&Ws is an assembly floor number, which has nothing to do with the serial number.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old September 20, 2008, 11:55 AM   #431
MacJ
Member
 
Join Date: August 12, 2008
Location: Cumming Ga
Posts: 15
J9587xx for the 36-1, J4002xx RIght off the Butt.
Thanks
MacJ is offline  
Old September 20, 2008, 12:37 PM   #432
MrBorland
Senior Member
 
Join Date: May 31, 2007
Location: NC
Posts: 2,614
Quote:
j9587xx For The 36-1
1982


Quote:
j4002xx
1976-1977
MrBorland is offline  
Old September 20, 2008, 02:59 PM   #433
MacJ
Member
 
Join Date: August 12, 2008
Location: Cumming Ga
Posts: 15
Thanks so much for you guys help.
MacJ is offline  
Old September 20, 2008, 05:10 PM   #434
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
It is my mod. 17-6 .22. s/n BDT5***


BTW ... my 686 model marking is 686-6 though it is a 7 shooter. I thought that the "6" referred to the number of shots. Any info on that?
BDT5XXX = 1989.
The dash numbers refer to engineering changes. In the case of the 686, the -6 started in 2001 with the addition of the internal lock.

Jim
laytonj1 is offline  
Old September 20, 2008, 06:26 PM   #435
Birdseye
Junior Member
 
Join Date: September 19, 2008
Posts: 10
Thank you again.

Ed
Birdseye is offline  
Old September 20, 2008, 07:18 PM   #436
Luis
Senior Member
 
Join Date: November 22, 2007
Location: Dollard des Ormeaux ,Qc,Canada
Posts: 128
S&W 38 SPL. model 36 1 7/8 barrel (square butt)

S&W 38 spl. model 60 serial number J314XXX

What can you tell me about this model????????
THANKS


[IMG]http:[/IMG]

[IMG]http:URL=http://good-times.webshots.com/photo/2859335830103886237FbagqR][/URL][/IMG]

[IMG]http:URL=http://good-times.webshots.com/photo/2418819880103886237qJPHqm][/URL][/IMG]
Luis is offline  
Old September 20, 2008, 07:31 PM   #437
Luis
Senior Member
 
Join Date: November 22, 2007
Location: Dollard des Ormeaux ,Qc,Canada
Posts: 128
To senior member Mike Irwin

S&W 38 spl. model 36 (not 60 ,sorry my mistake)

Luis
Luis is offline  
Old September 20, 2008, 08:27 PM   #438
kawasakifreak77
Senior Member
 
Join Date: December 16, 2007
Location: St. John, Ks.
Posts: 267
My dad is looking at what he says is a five screw, six sot .38 (I'm assuming special?) This is all he gave me;

483-XXX

Thanks.
kawasakifreak77 is offline  
Old September 20, 2008, 10:08 PM   #439
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
My dad is looking at what he says is a five screw, six sot .38 (I'm assuming special?) This is all he gave me;

483-XXX
Need more info. The serial number should not have a dash in it. Have him look on the very bottom of the grip frame for the serial number. If the grips cover the bottom of the frame then they'll need to be removed to see it.
Also, if it's a 38 Special then it will actually say 38 S&W Special CTG. on the barrel (38 S&W SPL on short barrels).

Jim
laytonj1 is offline  
Old September 20, 2008, 11:22 PM   #440
08 Cayenne
Member
 
Join Date: April 27, 2008
Posts: 20
I have a model 36 that I purchased new/unfired in 1988 but I think it was a couple of years old at the time of purchase. I still have the original box of .38 Sp that I bought with the gun, only a few rounds missing. I was thinking of breaking it in and using the gun for CCW. The year of manufacture would be appreciated, serial #ANR17XX. Thank You
08 Cayenne is offline  
Old September 21, 2008, 06:58 AM   #441
wnycollector
Senior Member
 
Join Date: April 22, 2007
Posts: 1,996
I'm looking for date of manufacture for a 5" pre-model 10 .38. On the frame and crane is E 44528. Under the barrel is c 135304. Thanks in advance!

Last edited by wnycollector; September 21, 2008 at 01:07 PM.
wnycollector is offline  
Old September 21, 2008, 12:07 PM   #442
kawasakifreak77
Senior Member
 
Join Date: December 16, 2007
Location: St. John, Ks.
Posts: 267
Maybe I'm mistaken about the dash. Would that be a valid number if there weren't a dash in it? Thanks again.
kawasakifreak77 is offline  
Old September 21, 2008, 02:02 PM   #443
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
serial #ANR17XX
Late 1986 to early 87.

Quote:
Under the barrel is C135304.
1948-51.

Quote:
Would that be a valid number if there weren't a dash in it?
Yes, if it is the actual SN, it would place it as a 38 Military and Police, 4th Change, made from 1915 to 1942 with serial numbers 241704 - 700000.

Jim
laytonj1 is offline  
Old September 21, 2008, 02:17 PM   #444
wnycollector
Senior Member
 
Join Date: April 22, 2007
Posts: 1,996
Thank you laytonj1!
wnycollector is offline  
Old September 21, 2008, 02:23 PM   #445
kawasakifreak77
Senior Member
 
Join Date: December 16, 2007
Location: St. John, Ks.
Posts: 267
Thanks laytonj1!
kawasakifreak77 is offline  
Old September 21, 2008, 07:42 PM   #446
08 Cayenne
Member
 
Join Date: April 27, 2008
Posts: 20
Thanks Jim
08 Cayenne is offline  
Old September 22, 2008, 10:01 AM   #447
carguychris
Senior Member
 
Join Date: October 20, 2007
Location: Richardson, TX
Posts: 7,523
Quote:
Also my 686

DBR 3***
My M638 has a DBD prefix and was made in August of 2007.

If you have the box with the original end label, see earlier in this thread for info on deciphering the date code.
carguychris is offline  
Old September 22, 2008, 11:09 AM   #448
Justin1025
Junior Member
 
Join Date: September 22, 2008
Posts: 1
What can someone tell me about this revoler

582XXX

I received this revolver from my grandpa when he passed. I just want to know what year it was made. Or anything about it.

It is a short handgun 5 shots .38spl

Looks like a blued steel kind of finish. the number has no dashes and was read off of the bottom of the frame.

Thank You,

Justin

Last edited by Justin1025; September 22, 2008 at 11:19 AM. Reason: too little detail
Justin1025 is offline  
Old September 22, 2008, 12:23 PM   #449
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,489
The only thing I can tell you about that gun right now is that it has spent time in Britain or one of the other commonwealth nations.

The "Five Tons" and the SP proof marks is indication of that. It also appears that each of the chambers was proofed individually. I've never seen that before.

Unfortunately, the pictures aren't clear enough to let me really see what the proofs are other than very general impressions.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old September 22, 2008, 12:47 PM   #450
carguychris
Senior Member
 
Join Date: October 20, 2007
Location: Richardson, TX
Posts: 7,523
Quote:
Also, if it's a 38 Special then it will actually say 38 S&W Special CTG. on the barrel (38 S&W SPL on short barrels).
+1. FYI older S&Ws chambered in .38S&W don't say "Special" on the barrel, just ".38 S&W CTG." or ".38 S&W".
Quote:
My dad is looking at what he says is a five screw, six sot .38...
FWIW if it's a 5-screw gun that lacks the word "Special" but will chamber a .38Spl cartridge, tell your dad to keep looking. It's likely one of the infamous .38Spl conversions of a former British military Lend-Lease Victory from WWII. These guns were originally manufactured in .38S&W but rechambered in .38Spl for commercial sale in the U.S. They have zero value as collectibles due to the modifications, and are sometimes unsafe to fire due to the poor quality of the reworking.

IMHO if he wants a cheap S&W, there is no reason to settle for one of these hack jobs anymore. There are plenty of holster-worn but mechanically tight 60s and 70s-vintage police trade-in M10s floating around for basically the same price. Tell him to buy one of those instead.
carguychris is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:06 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.51236 seconds with 9 queries