The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old April 23, 2011, 10:06 PM   #4126
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
The serial # is D1761XX
Serial numbers ran from D90001 in 1969 to D330000 in 1970.

Quote:
I just inherited a top-break revolver but most of the markings are worn off. It is a five shot .38 has a S/N of 4139XX
It's a .38 Double Action 4th Model.
Serial numbers ran from 322701 in 1895 to 539000 in 1909.
The chambering is .38 S&W, not to be confused with the .38 Special.

Jim
laytonj1 is offline  
Old April 24, 2011, 12:02 AM   #4127
Nosparetime
Senior Member
 
Join Date: July 6, 2009
Location: Oregon
Posts: 100
Serial Number request.

My first posting. I hope I did it right. I just picked up a k22 from a gentleman that bought it used in 1951. I believe it is from 1939. Serial number is K 52xxx. This gun has been well loved and shot. I promised them that it would be treated the same or better. I have been looking a long time for a K22 to shoot. They were always to expensive or to perfect to shoot. Clean and test fire in the morning.
Nosparetime is offline  
Old April 24, 2011, 12:21 AM   #4128
LipCa
Junior Member
 
Join Date: April 24, 2011
Posts: 6
My first post too...
My father passed and I ended up with his 357 magnum revolver.
It has a 6" barrel(according to the box). The only markings(other than maker and caliber) are on the butt. They are S1360XX.
I believe he bought it in the 1950's and I recall him calling it a"highway patrol".
Someone looked at it and said "that's a pre 27" whatever that means...
Any info would be great.
Can I shoot 38 specials in it?
LipCa is offline  
Old April 24, 2011, 07:40 AM   #4129
Fordx4
Junior Member
 
Join Date: April 23, 2011
Posts: 2
Quote:
It's a .38 Double Action 4th Model.
Serial numbers ran from 322701 in 1895 to 539000 in 1909.
The chambering is .38 S&W, not to be confused with the .38 Special.

Jim
Thanks!
Fordx4 is offline  
Old April 24, 2011, 03:30 PM   #4130
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
k22 Serial number is K 52xxx
1948. Serial numbers ran from K18732 to K73121 that year.

Quote:
S1360XX
Serial number dates it to 1955.
S&W made the "357 Magnum" which became the model 27 when they started assigning model numbers in 1958.
They also made a less expensive version, matte instead of polished blue finish. It was called the "Highway Patrolman" and will be stamped as such on the right side of the barrel. It became the model 28 begining 1958.
And yes, .38 and .38+P specials are fine for it.

Jim
laytonj1 is offline  
Old April 24, 2011, 04:36 PM   #4131
LipCa
Junior Member
 
Join Date: April 24, 2011
Posts: 6
This is not stamped "highway patrolman", so it's not that model.

Thanks so much for the quick info.

This is going to be a good forum....
LipCa is offline  
Old April 25, 2011, 08:50 AM   #4132
firecrocker
Junior Member
 
Join Date: April 25, 2011
Posts: 1
i am trying to find out what my lemon squeeze .38 is worth serial number 253062
firecrocker is offline  
Old April 25, 2011, 04:40 PM   #4133
TradedMyHalo
Junior Member
 
Join Date: April 25, 2011
Location: Maine
Posts: 1
S&W 28-2

I have Smith & Wesson 28-2 "Highway Patrolman" Revolver with a 6" barrel.
the Serial number is: N161XX. i just wondered if anyone had any idea when it was made and the estimated value of it.
TradedMyHalo is offline  
Old April 25, 2011, 05:40 PM   #4134
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
i am trying to find out what my lemon squeeze .38 is worth serial number 253062
Assuming you're referring to an original top break safety hammerless,
values as of 2006 ranged from $200 in good to $500 in excellent.
Quote:
Serial number is: N161XX
1973.
Value can range from less than $400 well used to $600 in excellent.

Jim
laytonj1 is offline  
Old April 26, 2011, 10:28 PM   #4135
jp8102
Junior Member
 
Join Date: April 26, 2011
Posts: 1
i have a smith. it says on one side of barrell "smith and wesson" and on the other it says "38 S&W CTG". under the cylinder it says "D^D, made in USA, F3R/193". on the other side it says "VEGA SAC CA." number which i assume is the serial is on the bottom of the handle/grip and is "748XXX" plus when you open cylinder it has a number "532XX" has a few other marks like flags and trade mark ect on it. what is some info you guys may be able to scroung up on this gun??? thanks a bunch
JP
jp8102 is offline  
Old April 27, 2011, 03:24 AM   #4136
Jhokenson
Junior Member
 
Join Date: April 27, 2011
Posts: 1
I recently recieved a S&W mod 36-1 from my aunt. Im looking for more info on it. S/N: AHF3XXX on butt and X5559 E24 on the crane.
Jhokenson is offline  
Old April 27, 2011, 05:56 PM   #4137
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
the serial is on the bottom of the handle/grip and is "748XXX"
It's from the .38 Military & Police 4th Change series but it sounds like it might be a .38/200 British Service Revolver (model 200) but I'm not positive. The serial number dates it to around 1940. The chambering, .38 S&W, is not to be confused with the more common .38 Special. The markings are/could be proof marks and import stamps (re-imported back to the US).
Pictures would help.

Quote:
S/N: AHF3XXX
1985.

Jim
laytonj1 is offline  
Old April 28, 2011, 12:28 PM   #4138
thunderhorse
Junior Member
 
Join Date: April 28, 2011
Location: Parkersburg, West Virginia
Posts: 1
trying to find some history

My cousin recently gave me our grandfathers .44 special and was wanting to know if anybody could tell me a little about the history or what it might be worth in todays market. The serial number on the butt is 17xxx any info would be very helpful and appreciated.

Last edited by thunderhorse; April 28, 2011 at 12:34 PM.
thunderhorse is offline  
Old April 28, 2011, 04:56 PM   #4139
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
The serial number on the butt is 17xxx
It would be a .44 Hand Ejector 2nd Model. It's also known as the 44 Triple Lock.
Serial numbers ran from 15376 in 1915 to 59XXX in 1940.
They are very desirable and collectable.
Value depends heavily on condition and can range from less than $500 in "fair" to several thousand in "as new".

Jim
laytonj1 is offline  
Old April 29, 2011, 04:27 PM   #4140
samandglove1
Junior Member
 
Join Date: July 6, 2010
Posts: 11
Chiefs Special

How about a Model 36, serial number 1J620.

Thanks
samandglove1 is offline  
Old April 29, 2011, 04:36 PM   #4141
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
serial number 1J620.
1982.

Jim
laytonj1 is offline  
Old April 29, 2011, 04:39 PM   #4142
samandglove1
Junior Member
 
Join Date: July 6, 2010
Posts: 11
I'm confused

Thanks Jim.

I'm confused though. It is a Model 36 no-dash with original numbered stocks and correct matching 2 piece box. Shouldn't a no-dash be older?
samandglove1 is offline  
Old April 29, 2011, 05:43 PM   #4143
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
It is a Model 36 no-dash with original numbered stocks and correct matching 2 piece box. Shouldn't a no-dash be older?
No dash 36's were made up to 1988. The 36-1 was the heavy 3" barrel version which was made concurrently.
The two piece boxes were made up to 1985.

Jim
laytonj1 is offline  
Old April 29, 2011, 06:25 PM   #4144
samandglove1
Junior Member
 
Join Date: July 6, 2010
Posts: 11
Floating J

I asked the seller (and someone else on the S&W Forum) and he said that the gun is a "floating J" and was manufactured in 1971. I don't know what a floating J is. Have you heard of it before?

Thank you.

Last edited by samandglove1; April 29, 2011 at 07:08 PM.
samandglove1 is offline  
Old April 29, 2011, 10:02 PM   #4145
jimwvisi
Junior Member
 
Join Date: April 29, 2011
Posts: 1
S&W Model 1917 .45 ACP Revolver

The serial number of this gun (my Grandfather's passed along by my Father) is 25148. It is marked US Army Model 1917 on the butt of the stock along with the S/N, and under the barrel is marked "United States Property". I would love to know about when this gun was manufactured. The bluing is mostly gone, and I think my Dad cleaned it with steel wool (ouch) but it is tight and still fires well! Thanks very much.

Jim
jimwvisi is offline  
Old April 30, 2011, 02:13 PM   #4146
Fishback
Junior Member
 
Join Date: April 30, 2011
Posts: 1
S&W 67-1 .38 Special AJN47XX

My wife and I just bought our first gun after some excellent training. She picked this one out. $410. Looking for approximate year for S&W 67-1 .38 Special AJN47XX. We shot it or the first time today at range. She was more accurate. Thanks in advance!

My photo: http://bit.ly/kF0o8u

[Answer thanks to Jim / laytonj1: 1986/87.]

Last edited by Fishback; May 1, 2011 at 08:12 PM. Reason: Updating w/ photo link.
Fishback is offline  
Old April 30, 2011, 02:31 PM   #4147
Dave Anderson
Senior Member
 
Join Date: March 4, 2011
Posts: 313
"The serial number of this gun (my Grandfather's passed along by my Father) is 25148. It is marked US Army Model 1917 on the butt of the stock along with the S/N, and under the barrel is marked "United States Property". I would love to know about when this gun was manufactured. The bluing is mostly gone, and I think my Dad cleaned it with steel wool (ouch) but it is tight and still fires well! Thanks very much.

Jim"

Production of this model began September 6, 1917 at serial number 1 (in a separate sequence from other N-frame S&Ws of the era). S&W was producing about 5,000 revolvers per month, suggesting your revolver was likely made around February of 1918.

A new building was completed in 1918 to increase production. From Sept 13, 1918 to the end of the war the U.S. government, dissatisfied with the speed of production, took control of the plant. Output increased from 5,000 to 14,500 revolvers per month. Total production during WW I was 163,476 revolvers. Some had not yet been delivered when the war ended and were sold commercially.

Fine old guns!
Dave Anderson is offline  
Old May 1, 2011, 08:52 AM   #4148
Twoglocks
Member
 
Join Date: April 24, 2011
Posts: 49
1911 S&W?

Jrf7447 1911 s&w .45
Twoglocks is offline  
Old May 1, 2011, 08:58 AM   #4149
TxQTPi
Junior Member
 
Join Date: May 1, 2011
Posts: 1
S&W 28-2 Highway Patrolman

We have a 6" barrel that is not blued 28-2 Highway Patrolman - the difference from it and all the photos I've found online is that it appears to have been chrome plated, and where the chrome is chipping off the cylinder from wear it is steel (not blued) even when the gun is completed dismantled it is steel. It has what I call a dead man symbol on the barrel next to the 357 CTG all the photos online I see have 4 dots (one on each side of the symbol) ours is different however, also my ampersand on the S&W is very ornate not the typical & symbol. Our Serial Number is S285XXX - anyone have any clue on why my gun is different from the hundreds I've seen online? My husband has taken it apart to check it and he states it has been very well taken care of. It also has a second number under the grip stamped in the steel 73140. I think we are still going to send a letter to Mr. Jinks, just wanted to know what you guys thought?

Thanks
TxQTPi
TxQTPi is offline  
Old May 1, 2011, 11:46 AM   #4150
conda70
Junior Member
 
Join Date: May 1, 2011
Posts: 4
Looking for date of manufactor of Smith and Wesson 38 Special CTG

Hi all,
First post. I am looking for the date of manufactor of my Smith and Wesson 38 Special CTG, S.N. S826xxx. It was my Grandfathers. Thank you for any help.
conda70 is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:57 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.60943 seconds with 9 queries