The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Semi-automatic Forum

Reply
 
Thread Tools Search this Thread
Old September 17, 2011, 06:54 PM   #1
OcSpeed
Senior Member
 
Join Date: December 1, 2009
Location: the greater unknown
Posts: 123
Kel Tec pf-9

Went to the gun store today to get another Glock 19 as a project gun and they were out, so as my CHP should be arriving anytime I figured I might as well pick this up and see what I think.

After some plinking on the range I think overall it's a great gun and can you beat the price, $245 at the shop closest to me (60 miles). And yes I live in the boonies.

No failures in the 80 rounds I put down range, ranging from wwb, remington, and 115g remington hollowpoints. It's plenty accurate, I was shooting cans easily at 7-10 yards, it shoots a hair low.

A couple of dislikes,
Assembly Pin, the fact that it needs an empty cartridge or the like to pop it out
An extra magazine would be nice too. For goodness sakes charge a little more for the gun and throw in an extra mag, it's for self defense not really a fun range gun.
Lastly, it's not as small as some people on the interwebs make it out to be, it could be a pocket gun, but just barely. And forget trying to stick in your back pocket on normal jeans, not happening.

Coming from Glocks and 1911's I thought I would hate the trigger, and let me just say it is LOOONNNNGGGG, but it's smoother/lighter than a JM625 by miles.

I'm satisfied, hope this review helps someone.
Attached Images
File Type: jpg pf-9 (1 of 1).jpg (78.4 KB, 133 views)
File Type: jpg pf-9 broken down (1 of 1).jpg (58.9 KB, 98 views)
OcSpeed is offline  
Old September 17, 2011, 07:52 PM   #2
t45
Senior Member
 
Join Date: January 29, 2010
Location: Foothills, NC
Posts: 782
I have one and it is my CCW without hesitations.
t45 is offline  
Old September 17, 2011, 09:37 PM   #3
Walt Sherrill
Senior Member
 
Join Date: February 15, 1999
Location: Winston-Salem, NC USA
Posts: 6,348
I have one, as well.

If you find it a relatively unpleasant gun to shoot -- and I do -- check out the KTADDONS grip material -- a nice recoil-absorbent material applied UNDER a wrap-around grip. It made mine noticeably more pleasant to shoot, without changing functionality. (I had previously used the same stuff on a P3AT and later on an LCP. Worked well there, which led me to getting their version for the PF-9.
Walt Sherrill is offline  
Old September 17, 2011, 10:35 PM   #4
TennJed
Senior Member
 
Join Date: September 26, 2010
Posts: 1,536
Got one and love it. Picked up a k3at this week also love it also. To me kel tec makes a great product no frills priced right and well made.

I plan on picking up a p11 soon also. If I am as happy as I am with the others that will give me 3 quality guns for the price of one high end gun

Throw in a lifetime warranty from a couple with a good customer service rep and I am a happy camper
__________________
Find out just how tall I am
By jumping in the middle of a river
TennJed is offline  
Old September 18, 2011, 12:09 AM   #5
michael t
Senior Member
 
Join Date: May 17, 2004
Location: Out back Ky
Posts: 4,044
I am packing mine at present it has become my #1 carry I bought a 2nd mag and found with out the finger rest my groups open up about 1/2 again from what they were.
I don't find the recoil all that bad. I have fired a 100 rounds at sitting . I do have trouble with putting pin back in after cleaning I have a bad hand and can't do properly I need my my daughter help me She is 17 and fires it also.

Only real problems I hear Is people trying to use the 147 gr bullets I stay in the lower weight where a 9mm was designed to be. Corbon DPX or the Golden Saber. I tried Corbon Power ball Now their snappy
I pocket carry in my jeans or in a slide type holster on my belt.


The only bitch people I know have with the P-11 is the long heavy trigger pull.
The PF-9 is like the P3AT nice and easy.
__________________
Certified Armed Infidel Colt Defender ,Colt Mustang ,Dan Wesson CBOB, PPK/S, American Classic 1911,Bersa Thunder 380
http://bersachat.comHome of Bersa
http://www.metroarms1911forum.com
michael t is offline  
Old September 18, 2011, 08:00 AM   #6
CDW4ME
Senior Member
 
Join Date: March 18, 2009
Posts: 1,316
Good review.
I've got a PF9 too. Yes, it's snappy, but it is a 13 oz 9mm.
__________________
Strive to carry the handgun you would want anywhere, everywhere; forget that good area bullcrap.
"Wouldn't want to / Nobody volunteer to" get shot by _____ is not indicative of quickly incapacitating.
CDW4ME is offline  
Old September 18, 2011, 09:13 AM   #7
khegglie
Senior Member
 
Join Date: July 5, 2009
Posts: 383
PF9 has tured into my EDC. I have a P11 which is good but it's amazing how the small change in width affects CC. Slip on grips really help with recoil.
khegglie is offline  
Old September 18, 2011, 10:53 PM   #8
bacardisteve
Senior Member
 
Join Date: September 5, 2006
Location: West virginia
Posts: 648
I love both mine. As others stated a slip on grip really helps. Mine is primarily used as a BUG but when its hot out its is sometimes my primary ccw. They are very reliable guns... The one i have has fired over 100 federal 9bple +p+ and is still going strong.
__________________
Kill em all and let God sort em out! USAF
bacardisteve is offline  
Old September 19, 2011, 07:06 AM   #9
LH2
Senior Member
 
Join Date: September 19, 2005
Location: Arizona
Posts: 635
Too large for pocket carry, IMO, but more comfortable to shoot than a .38 Airweight (or Air Lite) snubby, with better sights and capacity.

My PF-9 was not reliable, stove piping and dropping mags while firing. But they're inexpensive enough that I may try another one.
__________________
* Browning Hi-Power | Buck Mark * S&W 3913 NL | 3914 TSW | 442-1 * Kel-Tec P32 * Glock 19 | 26 * Ruger SP101 * Remington 870P * CZ 452 * Arsenal SGL-21 * AMD-65 * AK-74 *
LH2 is offline  
Old September 19, 2011, 07:27 AM   #10
OcSpeed
Senior Member
 
Join Date: December 1, 2009
Location: the greater unknown
Posts: 123
LH2 I think you should send it back, they should make it work right.
OcSpeed is offline  
Old September 21, 2011, 04:29 AM   #11
Justice06RR
Senior Member
 
Join Date: December 21, 2010
Location: Central FL
Posts: 1,360
I have one as well, picked it up a couple of weeks ago as a backup gun. Unfortunately I've had some issues within the first 50rds (currently still breaking it in). Mostly FTF's which are mag related.

I really like the PF9 and would like to carry it, but not until i get it running smoothly.
Justice06RR is offline  
Old September 21, 2011, 05:53 AM   #12
mes228
Senior Member
 
Join Date: July 19, 2005
Posts: 628
PF-9

I've owned two PF-9's and they have been great. So I traded for a PF-11 assuming it would be also. The PF-11 did run well. However, the trigger was MUCH worse, the recoil as bad or worse. Overall the PF-11 was a step down except for capacity. Hard to believe as good as the PF-9 is, the PF-11 is so much worse. Just an opinion based on owning one...... briefly.
mes228 is offline  
Old September 24, 2011, 05:48 PM   #13
SheepNutz
Member
 
Join Date: August 30, 2009
Posts: 79
I just use my thumbnail to pry out the takedown pin, no cartridge casing needed!
SheepNutz is offline  
Old September 24, 2011, 10:05 PM   #14
Toney
Senior Member
 
Join Date: August 17, 2005
Location: Stillwater Oklahoma
Posts: 790
Mine had the mag drop problem when i first got it but i trust it now. I carry it almost every day.
Toney is offline  
Old September 25, 2011, 04:07 PM   #15
tex45acp
Senior Member
 
Join Date: March 18, 2005
Location: The Great State of Texas
Posts: 1,019
My PF9 has been extremely reliable with 115gr and 124gr ammo. I have been able to shootonly one 147gr round that does not jam upon loading. Not a problem since 115gr is my plinking round and the 124gr is my PD round. I have carried it in a Galco pocket holster for almost 5 years now in everything I wear. Concealing it is no problem. I also have a custom IWB holster that I wear when my dress allows. If my records are correct I am at the 3500 round mark and the trigger just keeps getting smoother. What is really great about the gun is it shoots to point of aim and I have not experienced any of the mag dropping problems spoken of on many forums. My sons both carry one usually as a BUG. Mine is my BUG whenever my primary carry is something else. Here is my pocket carry setup.
__________________
“All that is required for evil to triumph is for good men to do nothing.“
tex45acp is offline  
Old September 25, 2011, 08:11 PM   #16
wingspar
Senior Member
 
Join Date: September 24, 2009
Location: Oregon
Posts: 258
I have about 330 rounds thru my PF9 that I’ve had a little over a month. The thing is a kick in the pants to shoot. Got JS Holster for it.

Quote:
Originally Posted by LH2
My PF-9 was not reliable, stove piping and dropping mags while firing. But they're inexpensive enough that I may try another one.
That’s a well known issue with the mag release spring, and Kel-Tec will send you the correct spring free.
__________________
Gary
Will Fly for Food... and more Ammo
wingspar is offline  
Reply

Tags
9mm , conceal , mouse gun , pocket

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:57 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.09540 seconds with 9 queries