May 27, 2010, 06:12 PM | #1 |
Senior Member
Join Date: August 21, 2008
Location: Kansas City
Posts: 1,393
|
A New One Joins The Herd
Just got it today, Uberti Cattleman 45 Colt from Taylors. Put a lightend hammer spring in and a set of Ivory grips from Dixie. All this afternoon. Now
I'm going to go and watch a John Wayne movie. |
May 27, 2010, 06:17 PM | #2 |
Junior member
Join Date: November 2, 2006
Posts: 908
|
GORGEOUS!
It would look REALLY nice with a set of aged (yellowed) ivory grips. I guess it's possible that may happen in time though. Nice score! |
May 27, 2010, 07:26 PM | #3 |
Senior Member
Join Date: March 29, 2007
Location: Raleigh, NC
Posts: 1,391
|
I like the quarter cock notch that acts like a hammer stop on these. The two dimples on the cylinder pin seems like a bit of overkill, but it occasionally shows to be useful. Dry fire with snap caps, or expect to be filing a burr from the firing pin hole.
__________________
How could you have a slogan like "freedom is slavery" when the concept of freedom has been abolished? |
May 27, 2010, 09:23 PM | #4 |
Member
Join Date: March 16, 2010
Location: missouri hollar
Posts: 56
|
beautiful revolver !! +1 on the John Wayne movie. Congrats.
__________________
Col. Jeff Cooper..remembered When a deadly situation presents,One will not "rise to the occasion" but will " default to his highest level of training" |
May 27, 2010, 09:38 PM | #5 | |
Junior member
Join Date: May 1, 2010
Posts: 195
|
Quote:
|
|
May 27, 2010, 10:12 PM | #6 |
Senior Member
Join Date: August 21, 2008
Location: Kansas City
Posts: 1,393
|
Anybody know what I can stain the grips with to make them look aged??
|
May 28, 2010, 12:50 AM | #7 | |
Senior Member
Join Date: March 15, 2005
Location: Central Connecticut
Posts: 3,166
|
Most experts seem to recommend painting plastic with a special Krylon Fusion paint but that's not the aged look that you wanted.
A search showed that there are have been questions asked about how to remove coffee stains from white plastic. Depending on the type of plastic, coffee stains might be relatively permanent and there are still ways to remove them even if they're really stubborn. Tea would be another possibility. Trying to stain the grips by steeping them in strong coffee sounds risky and it may or may not wear off over time. Anything that doesn't stay on the grips may come off on your hands. I'm sure that you realize that dyes are usually added to the plastic when it's first molded so coffee staining them would be experimental. Barkeeper's Friend is one way to remove stains from plastic. Hint: Since using harsh scrubbers on plastic may cause dirt and stains to accumulate, that knowledge might be used to your advantage if seriously trying to stain. Another idea would be to use heat but that could promote cracking and what's unknown is how much heat should be used. Would certain hot light bulbs in very close proximity produce enough heat to cause some browning? Will using a propane torch produce any of the desired effect or will it only damage the grips? The effect wouldn't be even and should only be tried in addition to staining unless you're willing to potentially ruin the grips. Someone said that tumeric produced a bright yellow stain on their white plastic food processor blades. If mixed with brown coffee liquid who knows how it would turn out? But the tumeric yellow probably wouldn't be permanent and may not even take at all. http://www.ehow.com/way_5179908_coff...l-plastic.html Quote:
Last edited by arcticap; May 28, 2010 at 11:39 PM. |
|
May 28, 2010, 09:09 AM | #8 |
Senior Member
Join Date: August 21, 2008
Location: Kansas City
Posts: 1,393
|
I soaked them overnight in a cup of coffee. The look good. Going to try
tea today. Will post pictures. I think this is going to work. |
May 28, 2010, 09:22 AM | #9 |
Senior Member
Join Date: August 21, 2008
Location: Kansas City
Posts: 1,393
|
This is brfore and soaking overnight in a cup of coffee. I think it helped it a
little. Going to try strong tea tonight. |
May 28, 2010, 04:50 PM | #10 |
Senior Member
Join Date: August 21, 2008
Location: Kansas City
Posts: 1,393
|
I sanded the awful color and varnish off the old wood grips and stained them
with a walnut stain and rubbed some oil in them. Think I'll keep them on. |
May 28, 2010, 06:00 PM | #11 |
Senior Member
Join Date: April 14, 2009
Location: Sunny Southern Idaho
Posts: 1,909
|
Those wood grips are winners in my book! A very fine firearm, to be sure!
__________________
Well we don't rent pigs and I figure it's better to say it right out front because a man that does like to rent pigs is... he's hard to stop - Gus McCrae |
May 28, 2010, 11:21 PM | #12 |
Member
Join Date: February 9, 2009
Location: Middle Georgia
Posts: 43
|
Great looking revolver, now you gotta get the DeSantis John Wayne commerative holster rig or the El Paso Saddlery rig like they made for him for the movie The Shootist, I'm wanting the El Paso one just gotta stop buying guns long enough to spend some cash on it.
__________________
Chad |
May 28, 2010, 11:28 PM | #13 |
Junior member
Join Date: May 1, 2010
Posts: 195
|
woodgrips for the win. Nice choice!
|
May 29, 2010, 12:10 AM | #14 |
Member
Join Date: December 8, 2009
Location: Idaho
Posts: 36
|
Wood
Wood is just CLASSY!
Best...... Andy |
May 29, 2010, 12:34 AM | #15 |
Senior Member
Join Date: March 15, 2005
Location: Central Connecticut
Posts: 3,166
|
But there's also something special about handsome white grips that resemble ivory! The white grips are compatible with and complement the coloration of the "nearly white" steel frame.
I appreciate all of the different grip materials including wood. |
May 29, 2010, 01:06 AM | #16 |
Member
Join Date: May 27, 2010
Location: Houston TX
Posts: 58
|
Most modern plastic grips are injection molded. This leaves the smooth grip surface pores closed. One way to get the desired effect id to lightly lick the grips with a propane torch. I recommend practicing on a piece of pvc pipe before going this route
|
May 29, 2010, 02:47 AM | #17 |
Senior Member
Join Date: February 24, 2009
Location: Arizona
Posts: 877
|
Yeah, I vote for the wood also. I take these Italian stallions and remove the red varnish also. What's underneath often times comes out looking rather nice!
Best, Oly |
May 29, 2010, 06:16 AM | #18 |
Senior Member
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,923
|
Stripping the Uberti RED off those grips is a major improvement. Something I do to all Uberti revolvers I own.
Something to try on faux ivory grips is alcohol based leather dye. This is the results I have gotten. |
Thread Tools | Search this Thread |
|
|