The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools Search this Thread
Old June 30, 2022, 04:00 PM   #1
awcraig
Junior Member
 
Join Date: December 22, 2014
Posts: 1
Pietta 1873 in 45 Colt - Front sight.

I purchased a Pietta 1873 45 Colt about a year and a half ago. I've fired around 500 rounds through it with no problems. Last week I was target shooting with it and after about 30 rounds the front sight just fell off after the last shot. Unfortunately the warranty on this revolver is only for 1 year. I'm wondering if it would be possible to glue it back on with a strong glue such as Loctite Black 426 and if it would withstand the recoil.
awcraig is offline  
Old June 30, 2022, 04:08 PM   #2
wjt4
Junior Member
 
Join Date: January 29, 2009
Location: Ohio
Posts: 4
I wouldn't try to "glue" it on. I would try soldering it on or have it soldered on. It's not hard to do and most shops can solder it on. Now having said that, I'm not sure what the factory actually does to put their sites on. They might do some sort of brazing. I don't think that they would weld it on. Soldering would work and hold relatively well. I've soldered parts on band instruments in the past with a silver solder. Youtube it and you could probably do it yourself.

Bill
wjt4 is offline  
Old June 30, 2022, 10:02 PM   #3
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 21,494
Solder it.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Old June 30, 2022, 11:01 PM   #4
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 19,990
The issue with glues is losing strength or softening in heat. For a handgun sight, you also have to be concerned about bumping against things and rubbing a holster, especially when it is hot, so you want some strength. Silver brazing (aka, silver soldering) is your best bet. If you don't know how and can't find someone you trust to do it, sending it for factory service is always a possibility.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member and Golden Eagle
Unclenick is offline  
Old June 30, 2022, 11:17 PM   #5
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 21,494
low-temp, high force solder.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Old July 1, 2022, 10:15 AM   #6
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 19,990
Not as strong as silver braze, but avoids the need to refinish afterward. I'm wondering if he can just ask Pietta what they used originally?
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member and Golden Eagle
Unclenick is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:48 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.03124 seconds with 9 queries