The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Thread Tools Search this Thread
Old December 3, 2004, 10:13 AM   #1
Junior Member
Join Date: December 3, 2004
Posts: 1
Springfield M-1 Garand

I have a M-1 that I am seriously considering selling or trading but do not have any idea as to what it may be worth. The serial number is 7007258. There are no nicks on any of the wood stock and the rifle is in great condition. Is there any other information that you may need in order to give me a window of its worth? Thanks...
oale3260 is offline  
Old December 17, 2004, 10:42 PM   #2
Junior Member
Join Date: December 16, 2004
Location: NW Wyoming
Posts: 13
Idont know what a used one is worth for sure but a new one I believe is $14 or $1500. something else to find out is if it is government issue or not oops
Chet is offline  
Old January 19, 2005, 02:19 PM   #3
Joe W
Join Date: January 16, 2005
Location: SW Florida & Western N.C.
Posts: 46
M1 Garand

Serial numbers in the 7000000 range are not Govt. manufacture. A private Company bought the rights to use the name "Springfield Armory" and have been making various guns, including the M1 Garand, for a number of years.
You can check out there web site at
Currently a new M1 from them sells for about $ 1300.00.
As far as what it is worth, that's hard to say. A good used original M1 can be bought from the Govt. (CMP) for $ 500.00. At gun shows dealers would be asking $ 700. and up for these. The market for your rifle would be limited to shooters as collectors would have no real interest.
When Springfield Armory INC. first started to make Garands they manufactured only the receiver and used Govt. surplus parts as there were plenty available at that time. I understand that they now manufacture all the parts. As your Serial # is quite low I would suspect you will find original USGI parts in your rifle.
Don't get me wrong, it is a quality built rifle and target shooters would be well pleased with it. I would bet it is built as good or better than the original.
Joe W is offline  
Old January 19, 2005, 05:34 PM   #4
Senior Member
Join Date: December 14, 2004
Location: Northern Indiana
Posts: 6,117
Joe W has it very right

A lot depends on the barrel and the action and how tight it is. The head spacing and over all condition. But for a used he's right on the money.
700 tops, norm above 500
Ozzieman is offline  
Old January 21, 2005, 01:31 PM   #5
Senior Member
Join Date: March 12, 2000
Posts: 1,092
Interesting, I once owned 7007251. As someone mentioned, the parts were all genuine USGI. It might be worth more as parts than as a rifle, if it hasn't been shot much...
JNewell is offline  
Old January 21, 2005, 08:30 PM   #6
Dennis Rogers
Join Date: October 22, 2004
Location: mid west
Posts: 50

J newell,
Man is that a one in a billon ! The fella I got it from had no infomation on the history of it,can you tell me anything about the garand when you owned it? How it shot etc. The weather here in Iowa has been so rotten I haven't even got to shoot it yet.
The only thing necessary for the triumph of evil is for good men to do nothing. Edmond Burke
Dennis Rogers is offline  
Old January 22, 2005, 05:24 PM   #7
Senior Member
Join Date: March 12, 2000
Posts: 1,092
Dennis -- it shot fine, though no better than Garands that I've gotten from CMP, which is a little bit disappointing because it was essentially new when I bought it, and the CMP rifles were not. It had one other quirk that I discovered by accident. The receiver is cast, not forged, as you may know. The dimensions of the receiver differ a little from the USGI receivers in their outward size. As a result, it would not drop into wood that was inletted to USGI specs. Not a big issue, just a sight oddity.

I have kind of bad feelings about that rifle for another reason. I sold it on consignment through a dealer. It functioned perfectly, as I said. The buyer brought it back and claimed it wouldn't function at all, and the dealer had to get some parts replaced. I don't know what the buyer did. I suspect he may have either swapped some of the parts for worn out parts, or perhaps bent the op rod or something like that. Whatever, it functioned perfectly for me but led to some friction with the dealer; I did not like even the suspicion that I'd unloaded a bad rifle. Still steams me...
JNewell is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 10:31 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.05397 seconds with 8 queries