12 ga break single shot stainless/nickel

johnwilliamson062 · January 9, 2009, 04:05 PM

I am looking everywhere for this. Just can't find one. Rossi makes a matched set youth n 410 with either a 22lr or 17 hmr barrel also. Would really prefer 12 or 20 gauge. If I can buy a nickel/stainless receiver and throw an aftermarket barrel on it I would consider that option even at a higher than most would consider worth while cost.
I have checked:
Ruger
H&R
Rossi
Sporting Arms
Stoeger
Remington
colt
Browning
Beretta
The last 4 are beyond the budget for this anyways.
May just go with the Stoeger coach in nickel. Could pull double duty as HD gun. See what scattergunbob has to say.

New_Pollution1086 · January 9, 2009, 04:23 PM

http://www.budsgunshop.com/catalog/p...ducts_id/89009

buds has another in .410 and 20ga.

I love buds.

T

johnwilliamson062 · January 9, 2009, 04:35 PM

H&Rs only have nickel receiver. I want a stainless/nickel barrel also. I own the shotgun you linked to.

New_Pollution1086 · January 9, 2009, 06:08 PM

ohh my bad

T

USA123456789 · January 9, 2009, 07:02 PM

John I do not think that you are going to be able to get that type of receiver on that brand or even have it made at all. You would think that this type is an special order type deal so if i where you john i would call the company.

johnwilliamson062 · January 9, 2009, 08:01 PM

Almost every company makes a nickel/stainless receiver. I don't follow.
I think I can get the 20 gauge Tamer barrel fitted for the receiver I already have. Would prefer 12ga, but that seems to be the closest I am going to get without spending a lot of money for something custom.

.357 mag · January 9, 2009, 08:15 PM

any dealer that dealer with this wholesaler. http://www.gzanders.com/

johnwilliamson062 · January 9, 2009, 11:49 PM

that post does not make sense to me either.

troy_mclure · January 10, 2009, 12:07 AM

cabellas will coat the bbl to match, its fairly inexpensive.

johnwilliamson062 · January 10, 2009, 12:32 PM

Troy, I called Cabelas and talked to a woman in their firearms department. She seemed to have no idea what I was talking about. Although she also told me thhandi rifle does not come in 12 ga(I had to explain they they don't call it a rifle when it is a shotgun). Can you tell me what location they will do this at or any more information at all?

troy_mclure · January 10, 2009, 12:39 PM

sorry!, i confuse gander mountain, and cabelas all the time!

mwar410 · January 10, 2009, 12:40 PM

have you tried the encore, problem is each barrel would cost as much as the rossi set.

Bill DeShivs · January 10, 2009, 02:40 PM

You can buy a standard model and send the barrel to a plater. Problem solved.

jheitertusa · January 11, 2009, 08:04 PM

I like the Condor Outback in nickle better than the Coach Gun

http://www.stoegerindustries.com/fir...or_outback.php

I think the over-under config is more like the single barrel you want than a side by side.

johnwilliamson062 · January 11, 2009, 10:36 PM

Probably going to get it plated.
Buy one of the stoeger double barrels later. I imagine pretty soon that is about the only shotgun design I will be able to buy anyways.

January 9, 2009, 04:05 PM	#1
johnwilliamson062 Junior member Join Date: May 16, 2008 Posts: 9,995	12 ga break single shot stainless/nickel I am looking everywhere for this. Just can't find one. Rossi makes a matched set youth n 410 with either a 22lr or 17 hmr barrel also. Would really prefer 12 or 20 gauge. If I can buy a nickel/stainless receiver and throw an aftermarket barrel on it I would consider that option even at a higher than most would consider worth while cost. I have checked: Ruger H&R Rossi Sporting Arms Stoeger Remington colt Browning Beretta The last 4 are beyond the budget for this anyways. May just go with the Stoeger coach in nickel. Could pull double duty as HD gun. See what scattergunbob has to say.

January 9, 2009, 04:23 PM	#2
New_Pollution1086 Senior Member Join Date: February 26, 2007 Location: WC - CA Posts: 680	http://www.budsgunshop.com/catalog/p...ducts_id/89009 buds has another in .410 and 20ga. I love buds. T __________________ "I have ridden the mighty moon worm, and it was good" "Aim Big miss Big, Aim small Miss small" "Don't rush the monkey and you'll see a better show." - T. Boone Pickens

January 9, 2009, 06:08 PM	#4
New_Pollution1086 Senior Member Join Date: February 26, 2007 Location: WC - CA Posts: 680	ohh my bad T __________________ "I have ridden the mighty moon worm, and it was good" "Aim Big miss Big, Aim small Miss small" "Don't rush the monkey and you'll see a better show." - T. Boone Pickens

January 9, 2009, 07:02 PM	#5
USA123456789 Senior Member Join Date: October 26, 2008 Location: Somewhere Posts: 123	John I do not think that you are going to be able to get that type of receiver on that brand or even have it made at all. You would think that this type is an special order type deal so if i where you john i would call the company. __________________ You can never have to many hulls but, the man that dies with the most hulls wins USA USA USA USA

January 9, 2009, 08:01 PM	#6
johnwilliamson062 Junior member Join Date: May 16, 2008 Posts: 9,995	Almost every company makes a nickel/stainless receiver. I don't follow. I think I can get the 20 gauge Tamer barrel fitted for the receiver I already have. Would prefer 12ga, but that seems to be the closest I am going to get without spending a lot of money for something custom. Last edited by johnwilliamson062; January 9, 2009 at 08:13 PM.

January 9, 2009, 04:35 PM	#3
johnwilliamson062 Junior member Join Date: May 16, 2008 Posts: 9,995	H&Rs only have nickel receiver. I want a stainless/nickel barrel also. I own the shotgun you linked to.

January 9, 2009, 08:15 PM	#7
.357 mag Senior Member Join Date: September 22, 2008 Location: Central Illinois Posts: 193	any dealer that dealer with this wholesaler. http://www.gzanders.com/

January 9, 2009, 11:49 PM	#8
johnwilliamson062 Junior member Join Date: May 16, 2008 Posts: 9,995	that post does not make sense to me either.

January 10, 2009, 12:07 AM	#9
troy_mclure Senior Member Join Date: November 17, 2008 Location: gulf of mexico Posts: 2,716	cabellas will coat the bbl to match, its fairly inexpensive. __________________ There is only one tactical principle which is not subject to change. It is to use the means at hand to inflict the maximum amount of wound, death, and destruction on the enemy in the minimum amount of time."

January 10, 2009, 12:32 PM	#10
johnwilliamson062 Junior member Join Date: May 16, 2008 Posts: 9,995	Troy, I called Cabelas and talked to a woman in their firearms department. She seemed to have no idea what I was talking about. Although she also told me thhandi rifle does not come in 12 ga(I had to explain they they don't call it a rifle when it is a shotgun). Can you tell me what location they will do this at or any more information at all?

January 10, 2009, 12:39 PM	#11
troy_mclure Senior Member Join Date: November 17, 2008 Location: gulf of mexico Posts: 2,716	sorry!, i confuse gander mountain, and cabelas all the time! __________________ There is only one tactical principle which is not subject to change. It is to use the means at hand to inflict the maximum amount of wound, death, and destruction on the enemy in the minimum amount of time."

January 10, 2009, 12:40 PM	#12
mwar410 Senior Member Join Date: December 25, 2008 Location: maine Posts: 234	have you tried the encore, problem is each barrel would cost as much as the rossi set.

January 10, 2009, 02:40 PM	#13
Bill DeShivs Senior Member Join Date: April 7, 2006 Posts: 10,981	You can buy a standard model and send the barrel to a plater. Problem solved. __________________ Bill DeShivs, Master Cutler www.billdeshivs.com

January 11, 2009, 08:04 PM	#14
jheitertusa Senior Member Join Date: March 19, 2002 Location: Indiana Posts: 119	I like the Condor Outback in nickle better than the Coach Gun http://www.stoegerindustries.com/fir...or_outback.php I think the over-under config is more like the single barrel you want than a side by side.

January 11, 2009, 10:36 PM	#15
johnwilliamson062 Junior member Join Date: May 16, 2008 Posts: 9,995	Probably going to get it plated. Buy one of the stoeger double barrels later. I imagine pretty soon that is about the only shotgun design I will be able to buy anyways.