Help Finding OEM TC Parts

Speed 1B · December 21, 2016, 10:51 PM

I have a chance to pick up a unfinished TC hawken in 54 cal. It is missing the lock and trigger assembly. The guy who has the gun knows nothing of its origin. I would say its a kit gun that was never finished. All i need is a lock and a trigger assembly to make the complete package here. Id like to buy all original TC parts so its 100% oem. Can you guys help me out and tell me where the best place to find those parts might be? Also what would you be willing to pay for the stock and barrel? And how much should i expect to pay for a lock and trigger assembly?

Thanks!

Beagle333 · December 21, 2016, 11:23 PM

Locks:
https://www.trackofthewolf.com/List/Item.aspx/795/1

Triggers:
https://www.trackofthewolf.com/List/Item.aspx/917/1

for stock and barrel prices.... check ebay.
You might even luck up and find triggers and locks there, but you also have no history on those or their condition.

Old Stony · December 22, 2016, 06:13 AM

Bunches of those parts on ebay...although most of them seem overpriced to me. Locks and triggers are pretty tough on the TC's and used ones are normally okay.

Speed 1B · December 22, 2016, 09:07 AM

Will the 54 barrel fit in a stock that is advertised as a .50 stock?

Pahoo · December 22, 2016, 11:08 AM

Quote:

Will the 54 barrel fit in a stock that is advertised as a .50 stock?

No or not a drop-in as the flats are wider on the .54. Sounds like you don't have a barrel either. If you do have a barrel and you have a "K" prefix on the S/N, then you do have a kit. .....

Quote:

Bunches of those parts on ebay

True and good place to look. Sadly folks are tearing these TC's down and selling the parts. Most of these parts can be trusted but you can't trust the condition of the barrels. ......

Be Safe !!!

Speed 1B · December 22, 2016, 11:54 AM

The barrel is a tc 54. I didn't check the serial number but i will now. The stock is there but it is unfinished. Reason i asked if it would fit a 50 stock is because there are several stocks with locks and trigger assemblies on ebay.

Pahoo · December 22, 2016, 12:13 PM

Quote:

The barrel is a tc 54.

I understand and your best bet, is to get a lock and double-set to complete your project. Although, as you have noted, the .50 to more common in Ebay, . Locks and Double-sets are will fit both the .50 and .54. .......

Have fun and;
Be Safe !!!

Sure Shot Mc Gee · December 22, 2016, 10:11 PM

EBay or Gun Brokers.

bamaranger · December 25, 2016, 03:03 AM

I've been cruising Ebay for about a month now, hoping to pick up a barrel and lock, but the prices have scared me off. Used to be the TC sidehammer guns were in every pawn shop here, neglected and cheap.....not now.

rep1954 · December 26, 2016, 07:30 PM

Speed 1B I sent you a P.M.

December 21, 2016, 10:51 PM	#1
Speed 1B Junior Member Join Date: December 21, 2016 Posts: 3	Help Finding OEM TC Parts I have a chance to pick up a unfinished TC hawken in 54 cal. It is missing the lock and trigger assembly. The guy who has the gun knows nothing of its origin. I would say its a kit gun that was never finished. All i need is a lock and a trigger assembly to make the complete package here. Id like to buy all original TC parts so its 100% oem. Can you guys help me out and tell me where the best place to find those parts might be? Also what would you be willing to pay for the stock and barrel? And how much should i expect to pay for a lock and trigger assembly? Thanks!

December 21, 2016, 11:23 PM	#2
Beagle333 Senior Member Join Date: January 7, 2012 Location: Auburn, AL. Posts: 2,332	Locks: https://www.trackofthewolf.com/List/Item.aspx/795/1 Triggers: https://www.trackofthewolf.com/List/Item.aspx/917/1 for stock and barrel prices.... check ebay. You might even luck up and find triggers and locks there, but you also have no history on those or their condition. __________________ . . . Have a Colt and a smile.

December 25, 2016, 03:03 AM	#9
bamaranger Senior Member Join Date: October 9, 2009 Location: North Alabama Posts: 8,308	cruising I've been cruising Ebay for about a month now, hoping to pick up a barrel and lock, but the prices have scared me off. Used to be the TC sidehammer guns were in every pawn shop here, neglected and cheap.....not now.

December 22, 2016, 06:13 AM	#3
Old Stony Senior Member Join Date: May 31, 2013 Location: East Texas Posts: 1,705	Bunches of those parts on ebay...although most of them seem overpriced to me. Locks and triggers are pretty tough on the TC's and used ones are normally okay.

December 22, 2016, 09:07 AM	#4
Speed 1B Junior Member Join Date: December 21, 2016 Posts: 3	Will the 54 barrel fit in a stock that is advertised as a .50 stock?

December 22, 2016, 11:54 AM	#6
Speed 1B Junior Member Join Date: December 21, 2016 Posts: 3	The barrel is a tc 54. I didn't check the serial number but i will now. The stock is there but it is unfinished. Reason i asked if it would fit a 50 stock is because there are several stocks with locks and trigger assemblies on ebay.

December 22, 2016, 10:11 PM	#8
Sure Shot Mc Gee Senior Member Join Date: January 2, 2012 Location: Minnesota Posts: 3,876	EBay or Gun Brokers.

December 26, 2016, 07:30 PM	#10
rep1954 Senior Member Join Date: July 5, 2009 Location: Mid Western Michigan Posts: 1,187	Speed 1B I sent you a P.M.